Versions Compared

Old Version 24

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV5UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ceaa0c33, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccf9091c, userName='null'}

Panel

In this section:

Table of Contents
maxLevel2

Overview

Multiexcerpt
MultiExcerptNameEvent Log Mapping

Use the Event Log object to create, configure, disable and enable system and subsystem level log files to capture system, security, debug, packet, trace and accounting events.

Caption
0Table
1Event Types
3Event Types
EventFacility
System16local0
Debug17local1
Trace18local2
Security19local3
Audit20local4
Accounting22local6
Platform Audit Logs23local7
Info
titleNote

Facility 21 and local5 are used by /var/log/fips.log.

 

For each event type, an event class (subsystem) and severity threshold can be configured. Event classes include:

  • Audit
  • Call processing
  • Directory services
  • Network management
  • Policy
  • Resource management
  • Network routing
  • Security
  • Signaling
  • System management
  • Call trace

The ROLLFILE facility provides a means of closing the active log file and opening a new one with an incremented (name) suffix. This facilitates real-time analysis of system events by performing the analysis on closed, rather than opened and growing, files.

 For more information on SBC's support for remote syslog servers and the supported log types, refer to Supported Log Types.

The Event Log object allows you to create event log filters to capture debug, security, system, trace, and accounting events using following parameters:

  • Filter Admin – Filter configuration for each event log type and event class
  • Filter Status – View filter status per each event log type and event class (using the request command)
  • INFO Level Logging Enable – Re-enable INFO level logging if it becomes disabled due to system congestion
  • Memory Usage – Measure memory usage of each process
  • Platform Audit Logs – View platform audit logs of administrative, privileged, and security actions
  • Subsystem Admin – Filter configuration for each subsystem
  • Type Admin – Event log for configuration items related to each event log type

Include Page
Netconf_security_protection
Netconf_security_protection

Multiexcerpt include
MultiExcerptNameUniqueHomeDirectory_6.0
PageWithExcerptALLDOC:SBC Core Default Groups and Passwords

Anchor
FilterAdmin
FilterAdmin
Filter Admin

Multiexcerpt include
MultiExcerptNameDebug_Event_Log_Overview
PageWithExcerptTroubleshooting SBC Using Debug Event Logs

 

Command Syntax

Code Block
languagenone
% set oam eventLog filterAdmin <node name>
	<event_type: audit | debug | memusage | security | system | trace>
	<event_class: audit | callproc | directory | netmgmt | policy |  resmgmt | routing | security | signaling | sysmgmt | trace>
	level <critical | info | major | minor | noevents>
	state <off | on>

Command Parameters

Multiexcerpt
MultiExcerptNamefilterAdmin
Caption
0Table
1Filter Admin Event Log Parameters
3Filter Admin Event Log Parameters

Parameter

Description

filterAdmin

Event Log Class Filter configuration table.

<node name>

SBC node name.

<event type>

The type of event log to configure:

  • audit – System audit data. These files contain a record of all management interactions that modify the state of the system, and includes all the changes made via the CLI and the Netconf interface. These files use .AUD extensions.
  • debug – System debugging data. These files have .DBG extensions.
  • memusage – Process heap memory usage data. These files have .MEM extensions.
  • security – Security level events. These files have .SEC extensions.
  • system – System level events. These files have .SYS extensions.
  • trace – System trace data. These files have .TRC extensions.

<event class>

For each event type, configure one of the following event:

  • audit – Audit subsystem.
  • callproc – Call Processing subsystem.
  • directory – Directory Services subsystem.
  • netmgmt – Network Management subsystem.
  • policy – Policy subsystem.
  • resmgmt – Resource Management subsystem.
  • routing – Network Routing subsystem.
  • security – Security subsystem.
  • signaling – Signaling subsystem.
  • sysmgmt – System Management subsystem.
  • trace – Call Trace subsystem.

level

Minimum severity level threshold for event logging:

  • critical – log only critical events.
  • info – log all events.
  • major – log major and critical events.
  • minor – log all events other than info.
  • noevents – do not log any events.

NOTE:  Info level logs which are traps or faults are always reported in the system logs.

state

Administrative state of event logging for this event type. Set to “on” if filter entry should take precedence over per-node settings.

  • off (default) – Logging is not activated.
  • on – Logging is activated.

 

Anchor
FilterStatus
FilterStatus
Filter Status

Command Syntax

Code Block
languagenone
% request oam eventLog filterStatus <node name>
   <event_type: audit | debug | memusage | security | system | trace>
   <event_class: audit | callproc | directory | netmgmt | policy |  resmgmt | routing | security | signaling | sysmgmt | trace>
   resetStats

Command Parameters

Multiexcerpt
MultiExcerptNamefilterStatus
Caption
0Table
1Filter Status Event Log Parameters

Parameter

Description

filterStatus

Event log class filter status table.

<system name>

SBC system name.

<event type>

The type of event log:

  • audit – System audit data. These files contain a record of all management interactions that modify the state of the system, and includes all the changes made via the CLI and the Netconf interface. These files use .AUD extensions.
  • debug – System debugging data. These files have .DBG extensions.
  • memusage – Process heap memory usage data. These files have .MEM extensions.
  • security – Security level events. These files have .SEC extensions.
  • system – System level events. These files have .SYS extensions.
  • trace – System trace data. These files have .TRC extensions.

<event class>

Event class for each event type:

  • audit – Audit subsystem.
  • callproc – Call Processing subsystem.
  • directory – Directory Services subsystem.
  • netmgmt – Network Management subsystem.
  • policy – Policy subsystem.
  • resmgmt – Resource Management subsystem.
  • routing – Network Routing subsystem.
  • security – Security subsystem.
  • signaling – Signaling subsystem.
  • sysmgmt – System Management subsystem.
  • trace – Call Trace subsystem.

resetStats

Use this control to reset the value of Events Filtered column of the filterStatus display.

 

Anchor
InfoLevelLoggingEnable
InfoLevelLoggingEnable
INFO Level Logging Enable

The active and standby SBC are designed to turn off INFO level logging if the system becomes congested. The "request oam eventLog infoLevelLoggingEnable clearInfoLevelLoggingDisabled" command is used to re-enable INFO level logging once it is disabled. See sonusCpEventLogInfoLevelLoggingDisabledNotfication - MAJOR for associated trap details.

To view INFO LEVEL LOGGING DISABLED state, run the following command.

Code Block
languagenone
title'show table oam eventLog typeStatus' Example
> show table oam eventLog typeStatus
                                                                                                                    INFO
                                               TOTAL                                                                LEVEL
          CURRENT      FILE     FILE    TOTAL  FILE      FILES    NEXT      LOG                                     LOGGING
TYPE      FILE         RECORDS  BYTES   FILES  BYTES     DROPPED  ROLLOVER  DESTINATION  LAST FILE DROP             DISABLED
------------------------------------------------------------------------------------------------------------------------------
system    1000005.SYS  216      31756   32     1032744   0        0         localDisk    0000-00-00T00:00:00+00:00  false
debug     1000014.DBG  1601     188964  32     27489838  0        0         localDisk    0000-00-00T00:00:00+00:00  false
trace     1000005.TRC  0        128     32     5224      0        0         localDisk    0000-00-00T00:00:00+00:00  false
acct      1000085.ACT  1        202     32     7592      0        0         localDisk    0000-00-00T00:00:00+00:00  false
security  1000005.SEC  7        1047    32     23610     0        0         localDisk    0000-00-00T00:00:00+00:00  false
audit     1000005.AUD  1002     186238  32     4267027   0        0         localDisk    0000-00-00T00:00:00+00:00  false
packet    1000005.PKT  0        128     32     872       0        0         localDisk    0000-00-00T00:00:00+00:00  false 

Command Syntax

Code Block
languagenone
% request oam eventLog infoLevelLoggingEnable clearInfoLevelLoggingDisabled

Command Parameter

Multiexcerpt
MultiExcerptNameinfoLevelLoggingEnable
Caption
0Table
1Info Level Logging Enable Event Log Parameter

Parameter

Description

clearInfoLevelLoggingDisabled

Use this command to re-enable info level logging after it becomes disabled due to system congestion. If this command is executed while the system is still congested, this may cause the system to become further congested.

NOTE: Only issue this command once system congestion dissipates. The system may become further congested if this command is executed while the system is still congested

Anchor
MemUsage
MemUsage
Memory Usage

Multiexcerpt include
MultiExcerptNameMemory Usage
PageWithExcerptResource Monitoring and Statistics

Command Syntax

Code Block
% set oam eventLog process memusage
        state <enable | disable>
        level <summary | detailed>
        interval <0...140>

 

Command Parameters

Multiexcerpt
MultiExcerptNameMemUsage
Caption
0Table
1Memory Usage Parameters
3Memory Usage Parameters
ParameterLength/RangeDescription
memusageN/AThe peer process memory usage configuration details.

state

N/A

Enable this flag to measure the memory usage of each active process.

  • disable (default)
  • enable
levelN/A

Specifies the level of details to be displayed.

  • summary (default)
  • detailed
Interval0-1440 minutes

The time interval, in minutes, to elapse between the recording of each memory usage file to the hard drive. (Default = 5)

NOTE: An interval of 1440 minutes (24 hours) equates to one log entry per day for a process.

Anchor
PlatformAuditLogs
PlatformAuditLogs
Platform Audit Logs

Use platformAuditLogs to configure a remote server IP address, port, and protocol type to push platform audit logs of administrative, privileged, and security actions to a remote server. .

When platformAuditLogs is enabled, the /etc/rsyslog.conf file sends the /var/log/audit/audit.log to the remote server's /var/log/messages file. The remote server's /etc/rsyslog.conf file must match the configuration of the SBC to receive the audit logs. The SBC automatically adds an Access Control List (ACL) rule to send the audit logs through the application layer to the remote server.

 

Info
titleNote
The ACL rule is removed automatically from the default ACL rules when platformAuditLogs is disabled.
Info
titleNote

For a High Availability (HA) pair, the /etc/rsyslog.conf file is updated both on the Active and the Standby SBCs to push the audit logs to the remote server.


Command Syntax

Code Block
languagenone
% set oam eventLog platformAuditLogs
    auditLogPort <1 to 65535>
    auditLogProtocolType <relp | tcp | udp>
    auditLogRemoteHost <IPv4/IPv6 address>
    state <disabled | enabled>

Command Parameters

Multiexcerpt
MultiExcerptNameplatformAuditLogs
Info
titleNote

Ensure the Platform Audit Logs state is set to "disabled" before configuring/re-configuring the IP address, port, and/or protocol type of the remote server.

Caption
0Table
1Platform Audit Logs Parameters
ParameterLength/RangeDescription
platformAuditLogsN/A

Use this object to configure a remote server IP address, port, and protocol type to push the platform audit logs to a remote server.

auditLogRemoteHostUp to 256 characters

<IP address> – The IPv4 or IPv6 address of the remote server. (IPv4 default – 0.0.0.0 / IPv6 default – ::)

NOTE: When the IPv4 or IPv6 address is configured to the default“0.0.0.0” or “::", respectively, the SBC does not send the audit logs to the remote server.

auditLogPort

1 to 65535

<port number> – The port number used to send the audit logs to the remote server. (Default = 514)

auditLogProtocolType

N/A

The protocol type used to send the audit logs to the remote server.

  • relp
  • tcp (default)
  • udp

state

N/A 

Enable this flag to allow platform audit logging of administrative, privileged, and security actions.

  • disabled (default)
  • enabled

 

Anchor
SubsystemAdmin
SubsystemAdmin
Subsystem Admin

Command Syntax

Mandatory parameters required to configure an Event log subsystem event type:

Code Block
languagenone
% set oam eventLog subsystemAdmin <system_name> <subsys_ID>

Non-mandatory parameters to configure an Event log subsystem event type:

Code Block
languagenone
% set oam eventLog subsystemAdmin <system_name> <subsys_ID>
	infoLogState <disabled | enabled>
	maxEventID <0-4.294967295E9>
	minEventID <0-4.294967295E9>

Command Parameters

Multiexcerpt
MultiExcerptNamesubsystemAdmin
Caption
0Table
1Subsystem Admin Event Log Parameters

Parameter

Description

subsystemAdmin

Subsystem event logging configuration.

<system_name>

Name of system.

<subsys_ID>

The subsystem/task ID. See Subsystem IDs table below for a list of subsystem IDs. 

infoLogState

Use this flag to enable/disable event logging of INFO level messages to DBG and SYS logs for   the specified subsystem. By default, infoLogSate is enabled for all subsystems.

  • disabled
  • enabled (default)

NOTE:

  • If infoLogState is disabled for CHM, nothing is written to AUD logs.
  • If infoLogState is disabled for CPX, request commands are not recorded to AUD logs.
Caption
0Table
1Subsystem IDs
3Subsystem IDs

acm     aka

arma    arm

asg     asg

atmrm  brm

brm    cam

cam     cc

cassg   chm

cc      cpx

chm dbl

cli     dcm

cmtsg    debug

cnh     dfe

cpx    dht

dbug   diamc

diamc     dnsc

dnsc    drm

drm ds

ds 

ema     

enm 

fm      

frm    

grm    

gwfe      

gwsg    

h323sg  

icmsvc   

ike     

im     

ipacl  

ipm       

lvm   

mgsg 

mtp2    

mtrm     

ncm    

ncomm  

nim   

nrm     

nrma      

nrs 

ntp     

pathchk  

pes     

pfa    

pipe   

pipehook  

prm     

reserved  

rtcp 

rtm     

scpa     

sec     

sfm    

sg 

sgisdn    

sgisup  

sipfe     

sipsg 

sm      

dsa

dtls/srtp

ema

enm

enm_am

enm_test

fm

gcl mbs

gclcomm

gwcm

gwfe

gwsg

h248fe

h323fe

h323sg

ice

iceapp1

iceapp2

iceapp3

iceapp4

iceapp5

iceapp6

iceapp7

iceapp8

icms_test1

icms_test2

ike

im

ipacl

ipm

kfqdn

les

license_sm

lvm

lwresd

mgsg

mim

mrm

mtrm

nim

nrm

nrma

nrs

pathchk

perfs

perfs

pes

pipe

prsnp

rgm

rtm

rtma

sbcintf

scpa

sec

sg

sipcm

sipfe

sipsg

sm

sma

ssa

ssreq

surrreg

trcrt

trm

xrm

sma      

ssa     

trm    

xrm 

 

 

 

Anchor
TypeAdmin
TypeAdmin
Type Admin

Info
titleNote

The syslog ACL rules are added and removed by enabling/disabling syslogState and configuring the syslog log fields.

 

Command Syntax

The following syntax applies to the "set oam eventLog typeAdmin" command:

Code Block
languagenone
% set oam eventLog typeAdmin <acct | audit | debug | memusage | packet |  security | system | trace>
   fileCount <1-2048>
   fileSize <256-65535>
   fileWriteMode <default | optimize>
   filterLevel <critical | info | major | minor | noevents>
   messageQueueSize <2-32>
   renameOpenFiles <disabled | enabled>
   rolloverAction <start | stop>
   rolloverInterval <0-31536000>
   rolloverStartTime <time>
   rolloverType <repetitive | nonrepetitive>
   saveTo <none | disk>
   state <disabled | enabled | rollfile>
   syslogRemoteHost <up to 255 characters>
   syslogRemotePort <1-65535>
   syslogRemoteProtocol <relp | tcp | udp>
   syslogState <disabled | enabled>
Note

Only the Administrator can execute the above command using the "audit" and "security" attributes:

% set oam eventLog typeAdmin audit...
% set oam eventLog typeAdmin security...

The following syntax applies to the "request oam eventLog typeAdmin" command:

Code Block
languagenone
% request oam eventLog typeAdmin <acct | audit | debug | memusage | packet |  security | system | trace> rolloverLogNow

% request oam filterStatus <card name> <audit | debug | memusage | security | system | trace> 
	<audit | callproc | directory | netmgmt | policy | resmgmt | routing | security | signaling | sysmgmt | trace
Note

Only the Administrator can execute the following commands using the "audit" and "security" attributes:

% request oam eventLog typeAdmin audit rolloverLogNow
% request oam eventLog typeAdmin security rolloverLogNow
% request oam eventLog filterStatus <card name> security security resetStats

Include Page
Info level logs behavior
Info level logs behavior

Command Parameters

Multiexcerpt
MultiExcerptNametypeAdmin1
Caption
0Table
1Type Admin Event Log Parameters (set command)

Parameter

Length/Range

Description

typeAdmin

N/A

Event Log configuration table for configuration items related to each Event Log type.

<event_type>

N/A

Specifies the type of event log being configured:

  • acct – System account data. These files have .ACT extensions.
  • audit – System audit data. These files contain a record of all management interactions that modify the state of the system. These files have .AUD extensions. It  includes   all the changes made via the CLI and the Netconf interface. (This attribute is only available to an Administrator)
  • debug – System debugging data. These files have .DBG extensions.
  • memusage – Process heap memory usage data. These files have .MEM extensions.
  • packet – Packet information details. These files have .PKT extensions. If enabled, stores the packet details to .PKT files.
  • security – Security level events. These files have .SEC extensions. (This attribute is only available to an Administrator)
  • system – System   level events. These files have .SYS extensions.
  • trace – System trace data. These files have .TRC extensions.

NOTE: Syslog is not supported for acct and packet event types.

fileCount

1-2048

Specifies the number of event log files that will be maintained for this event type. (default = 32).

fileSize

256-65535

Maximum size (in KB) that a single event log file will ever grow to. (default = 2048).

fileWriteMode

N/A

Event log NFS write mode. 

  • default – Log data is written as a 1344-byte packet.
  • optimize – Log data is written as a 8000-byte packet. Optimize write mode results in IP fragmentation but yields better throughput.

filterLevel

N/A

Events that are at least as severe as the designated level will be logged.

  • critical – log only events of this threshold.
  • info – log every possible event.
  • major – log major and critical events only.
  • minor – log all events other than information.
  • noevents – do not log any events.

NOTE: The command to set the filterLevel for the acct event type is no longer applicable.

messageQueueSize

2-32

The number of event log message entries to buffer before writing to disk. (default = 10).

renameOpenFiles

N/A

Enable this flag to append an ".OPEN" extension to accounting and files which are open for writing.

  • disabled (default)
  • enabled

NOTE:You must enable the global callTrace signalingPacketCapture parameter (set state to "enable") to capture SIP and H.323 packets (Refer to Call Trace - CLI for configuration details).

Once signalingPacketCapture is enabled, any subsequent changes to SBC device configurations or filter information will not be available to signaling packet captures until signalingPacketCapture is reset (state is disabled, and then re-enabled).

rolloverAction

N/A

Event log rollover actions.

  • start – Start rollover action
  • stop – Stop rollover action

rolloverInterval

0-31536000

Event log rollover interval, in seconds.

rolloverStartTime

N/A

Specifies the start time for event log rollover. The format is CCYY-MM-DDTHH:MM:SS. For example: 2010-01-01T01:01:01

rolloverType

N/A

Event log rollover type. 

  • nonrepetitive (default) – The rollover will occur once at the specified single instance.
  • repetitive – The rollover will occur repeatedly at the specified intervals.

saveTo

N/A

Use flag to specify that the events are saved to disk or not saved.

  • disk (default)
  • none

state

N/A

Specifies the requested state of the given Event Log type.

  • disabled – Logging is not activated.
  • enabled – (default) Logging is activated.
  • rollfile

 Accounting logs cannot be disabled.

syslogRemoteHost

0-255

The remote host where the messages are written to the syslog.

syslogRemotePort

1-65535

Specifies the port to use to send messages to the remote syslog. Default value is 514.

syslogRemoteProtocol

N/A

The protocol to use to send messages to the remote syslog.

  • relp
  • tcp (default)
  • udp

syslogState

N/A

Enable flag to log events of specified type to syslog.

  • disabled (default)
  • enabled
Multiexcerpt
MultiExcerptNametypeAdmin2
Caption
0Table
1Type Admin Event Log Parameters (request command)

Parameter

Description

typeAdmin

Event Log configuration table for configuration items related to each Event Log type.

<event_type>

Specifies the type of event log to roll over:

  • acct – System account data. These files have .ACT extensions.
  • audit – System audit data. These files contain a record of all management interactions that modify the state of the system. These files have .AUD extensions. It  includes   all the changes made via the CLI and the Netconf interface. (This attribute is only available to an Administrator)
  • debug – System debugging data. These files have .DBG extensions.
  • memusage – Process heap memory usage data. These files have .MEM extensions.
  • packet – Packet information details. These files have .PKT extensions. If enabled, stores the packet details to .PKT files.
  • security – Security level events. These files have .SEC extensions. (This attribute is only available to an Administrator)
  • system – System   level events. These files have .SYS extensions.
  • trace – System trace data. These files have .TRC extensions.

rolloverLogNow

This control is used with request command to perform a roll-over of the specified log immediately.

 

Command Examples

To view typeAdmin status from the system-level prompt:

Info

Refer to Show Table OAM for additional details.

Code Block
> show table oam eventLog typeAdmin
                                                MAX
                                 MESSAGE        EVENT           ROLLOVER                                     FILE               SYSLOG   SYSLOG    SYSLOG  RENAME    DISK
                   FILE   FILE   QUEUE    SAVE  MEMORY  FILTER  START     ROLLOVER                 ROLLOVER  WRITE    SYSLOG    REMOTE   REMOTE    REMOTE  OPEN      THROTTLE
TYPE      STATE    COUNT  SIZE   SIZE     TO    SIZE    LEVEL   TIME      INTERVAL  ROLLOVER TYPE  ACTION    MODE     STATE     HOST     PROTOCOL  PORT    FILES     LIMIT
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
system    enabled  32     2048   10       disk  16      major   -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  5000
debug     enabled  32     10240  10       disk  16      info    -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -
trace     enabled  32     2048   10       disk  16      info    -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -
acct      enabled  32     2048   10       disk  16      major   -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -
security  enabled  32     2048   10       disk  16      major   -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -
audit     enabled  32     2048   10       disk  16      minor   -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -
packet    enabled  32     2048   10       disk  16      major   -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -
memusage  enabled  32     2048   10       disk  16      major   -         0         nonrepetitive  stop      default  disabled  0.0.0.0  tcp       514     disabled  -

 

To configure event log type “packet” by setting file count to “1”, maximum file size to 256 KB, roll-over interval to 2 seconds, and then enabling the event log but disabling the logging of events to syslog:

Code Block
languagenone
% set oam eventLog typeAdmin system fileCount 1 fileSize 256 rolloverInterval 2 state enabled syslogState disabled
% show oam eventLog typeAdmin system
   state enabled;
   fileCount 1;
   fileSize 256;
   rolloverInterval 2;
   syslogState disabled;

 

To send the command to request an immediate roll-over:

Code Block
languagenone
% request oam eventLog typeAdmin system rolloverLogNow

 

To display typeAdmin event log details. It has been shortened for brevity.

Code Block
languagenone
% show details oam eventLog typeAdmin

typeAdmin system {
    state                enabled;
    fileCount            32;
    fileSize             2048;
    messageQueueSize     10;
    saveTo               disk;
    filterLevel          major;
    rolloverInterval     0;
    rolloverType         nonrepetitive;
    rolloverAction       stop;
    fileWriteMode        default;
    syslogState          disabled;
    syslogRemoteHost     0.0.0.0;
    syslogRemoteProtocol tcp;
    syslogRemotePort     514;
    renameOpenFiles      disabled;
}
Code Block
languagenone
typeAdmin debug {
    state                enabled;
    fileCount            32;
    fileSize             2048;
    messageQueueSize     10;
    saveTo               disk;
    filterLevel          info;
    rolloverInterval     0;
    rolloverType         nonrepetitive;
    rolloverAction       stop;
    fileWriteMode        default;
    syslogState          disabled;
    syslogRemoteHost     0.0.0.0;
    syslogRemoteProtocol tcp;
    syslogRemotePort     514;
    renameOpenFiles      disabled;
}
Code Block
languagenone
typeAdmin trace {
    state                enabled;
    fileCount            32;
    fileSize             2048;
    messageQueueSize     10;
    saveTo               disk;
    filterLevel          info;
    rolloverInterval     0;
    rolloverType         nonrepetitive;
    rolloverAction       stop;
    fileWriteMode        default;
    syslogState          disabled;
    syslogRemoteHost     0.0.0.0;
    syslogRemoteProtocol tcp;
    syslogRemotePort     514;
    renameOpenFiles      disabled;
}
Code Block
languagenone
typeAdmin memusage {
    state                enabled;
    fileCount            32;
    fileSize             2048;
    messageQueueSize     10;
    saveTo               disk;
    filterLevel          major;
    rolloverInterval     0;
    rolloverType         nonrepetitive;
    rolloverAction       stop;
    fileWriteMode        default;
    syslogState          disabled;
    syslogRemoteHost     0.0.0.0;
    syslogRemoteProtocol tcp;
    syslogRemotePort     514;
    renameOpenFiles      disabled;
}
...