Page History

Add_workflow_for_techpubs

AUTH2	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
AUTH1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
JIRAIDAUTH	SBX-6043872115
REV5	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
JIRAIDAPPR2	SBX-65479
REV3REV4	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ceab0c45, userName='null'}
REV1REV2	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ceab0c45, userName='null'}

Panel

In this section:

Table of Contents

maxLevel	3
minLevel	2

Include Page

	Call_Stats_Terms
	Call_Stats_Terms

Excerpt Include

	Resource Monitoring and Statistics
	Resource Monitoring and Statistics
nopanel	true

Include Page

	IntervalStatsMustMatchEMS
	IntervalStatsMustMatchEMS

Include Page

	Stats_results_limited_in_Global
	Stats_results_limited_in_Global

Command Syntax

The command syntax of the objects related to the show table globalcommand is shown below.

Code Block

language	none

> show table global
	cac
	callCountCurrentStatistics
	callCountIntervalStatistics
	callCountStatus 
	callDetailStatus 
	callMediaStatus
	callRemoteMediaStatus
	callResourceDetailStatus 
	callRouting 
	callSummaryStatus 
	callTrace 
	callTraceStatus
	carrier 
	country 
	dtlsSrtpStatistics
	globalTrunkGroupStatus 
	icmpGeneralGroupStatistics 
	ipGeneralGroupStatistics 
	license 
	monitorEndpoint 
	monitorEndpointStatus 
	monitorTarget 
	monitorTargetStatus 
	npaNxx 
	ocsCallCountStatus 
	policyServer 
	qoeCallRouting 
	script 
	security 
	serviceAuthorisedCurStats
	serviceAuthorisedIntStats
	servers 
	signaling 
	sipDomain 
	SipRecStatus
	subscriber 
	system
    tcpGeneralGroupStatistics 
	udpGeneralGroupStatistics

Common Statistics to 'show status / table global' Commands

Div

class	excerptdiv

Excerpt

Caption

0	Table
1	Common Parameters - 'show status global' and 'show table global'
3	Common Parameters

Parameter	Description
`SipRecStatus`	List of calls being recorded through SIPREC. `gcid` `recorderAddress` `rxRtpAddress` `txRtpAddress` `recordingLeg`
`cac`	Global CAC objects. See CAC Statistics table below for details.
`callCountCurrentStatistics`	The number of active and stable sessions over a configured interval of time. `name` – A dummy key used during collection of statics. Ignore this field. `callCount` – The maximum¹ number of stable calls since SBC booted/rebooted.
`callCountIntervalStatistics`	The number of active and stable sessions for one or more intervals. `number` – A sequence number identifying the statistics interval collected during the interval period. `name` – A dummy key used during collection of statics. Ignore this field. `intervalValid` – A value of "true" indicates this interval is valid. `time` – The system up-time during which the interval statistic was collected. `callCount` – The maximum number of stable calls for a configured interval of time. INFO: Currently, only the maximum session count is supported.
`callCountStatus`	Call count statistics for the server; cumulative count since boot. Results include following fields: `activeCalls` – A snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing). `callAttempts` – Number of call attempts on this server. `callCompletions` – Total number of call attempts that were completed on this server. `callUpdates` – Total number of call updates (re-INVITES or any other triggers that result in call transitioning to transient state/stable state). `stableCalls` – Current number of stable managed calls on this server. `totalCalls` (see `activeCalls` definition above). `totalCallsEmergEstablishing` – A snapshot of the total number of emergency calls currently in the 'establishing' state. `totalCallsEmergStable` – A snapshot of the total number of emergency stable calls currently up on the SBC. Stable Calls are defined as calls that are fully stable – connected and media cut-through that will survive fail over. This excludes calls in establishing, clearing and updating states, which will not survive switchover. NOTE: The following statistics are deprecated: `activeCallsNonUser` `stableCallsNonUser` `totalCallsNonUser`
`callDetailStatus`	See Call Detail Status Data table for details.
`callMediaStatus`	See Call Media Status Statistics table for details.
`callRemoteMediaStatus`	(D-SBC only) Displays the media statistics corresponding to private NIF resources for an MRF call. `gcid` – Unique Global Call Identifier (GCID) of the call `resIndex` – Target resource index to access details within the call `streamId` – Identifier of the media stream in the call to which the resource is allocated `resId` – Resource identifier of the public and private NIF resource hosted in Media or Transcoding used in the call `resType` – Resource type (Example: xresUser) `legId` – The call leg ID on which the resource resides (Example: Ingress-0, Egress-1) `nodeGcidAndIpAddr` – GCID and IP address of the node (M/T) where the resource is hosted (Example: 16 (192.168.3.34), 16 is GCID and 192.168.3.34 is IP address) `localRtpPort` – Local RTP port of the public or private NIF resource hosted in M or T SBC `remoteRtpPort` – Remote peer's RTP port `remoteRtcpPort` – Remote peer's RTCP port `rtpPacketSent` – Number of RTP packets sent by the resource `rtpPacketRecv` – Number of RTP packets received by the resource `rtcpPacketSent` – Number of RTCP packets sent by the resource `rtcpPacketRecv` – Number of RTCP packets received by the resource `rtpPacketDiscard` – Number of RTP packets discarded by the resource
`callResourceDetailStatus`	Call resource statistics. `gcid` – Unique Global Call Identifier (GCID) of the call `resIndex` – Target resource index to access details within the call `resId` – Resource identifier of the public and private NIF resource hosted in Media or Transcoding used in the call `resType` – Resource type (Example: xresUser) `callId` – Global Call identifier (GCID) for the call to which this resource is allocated `legId` – The call leg ID on which the resource resides (Example: Ingress-0, Egress-1) `nodeGcidAndIpAddr` – GCID and IP address of the node (M/T) where the resource is hosted (Example: 16 (192.168.3.34), 16 is GCID and 192.168.3.34 is IP address)
`callSummaryStatus`	Call Summary status table.
`dtlsSrtpStatistics`	DTLS-SRTP negotiation statistics. `clientAuthFailures` – The number of times peer failed DTLS authentication with SBC as the client. `currentClientConnections` –`The number of client sessions currently active.` `currentServerConnections – The number of server sessions currently active.` `fatelAlertsReceived – The number of FATAL Alerts received.` `fingerprintMismatch – The finger print miss match.` `handshakeFailures – The cumulative total of all handshake failures.` `handshakeTimeouts – The number of handshakes that timed out before completing.` `noCipherSuite – The number of handshake failures due to inability to converge on a cipher suite.` `noClientCert – The number times we were the client and we failed to derive a certificate to send the server.` `noSrtpProfile – The absence of the Srtp Profile.` `receiveFailures – The number of receive failures (failure to decrypt).` `sendFailures – The number of send failures (failure to encrypt).` `serverAuthFailures – The number of times peer failed DTLS authentication with SBC as the server.` `sessionResumptions – The number of server sessions that have been resumed.` `successfulClientHandshakes – The number of complete client handshakes.` `successfulServerHandshakes – The number of complete server handshakes.` `totalClientSessions – The cumulative total number of client sessions.` `totalServerSessions – The cumulative total number of server sessions.` `versionMismatch – The number of failed version miss match.` `warningAlertsReceived – The number of WARNING Alerts received.`
`globalTrunkGroupStatus`	Gloval statistics of IP trunk groups in this zone. `addressContext` – The name of address context for this trunk group. `bwAvailable` – The amount of bandwidth available for allocation. (Kbits/second) `bwCurrentLimit` – The current bandwidth limit for this IP trunk group. (Kbits/second) `bwInboundUsage` – The amount of bandwidth in use for inbound traffic. (Kbits/second) `bwOutboundUsage` – The amount of bandwidth in use for outbound traffic. (Kbits/second) `inboundCallsUsage` – Number of inbound calls for IP trunk groups configured for inbound or both directions. `outboundCallsUsage` – Number of non-priority outbound calls for this IP trunk group. `packetOutDetectState` – The packet outage detection state. `priorityCallUsage` – Number of priority calls for IP trunk groups configured with callReservation state enabled. `state` – Current operational state of the IP trunk group. `totalCallsAvailable` – The sum of all available or unblocked calls for this trunk group. `totalCallsConfigured` – The total number of calls that are configured on this IP trunk group. `totalCallsInboundReserved` – Total number of inbound calls reserved for IP trunk groups configured for inbound or both directions only. `totalOutboundCallsReserved` – Total number of outbound calls reserved for IP trunk groups that are configured for incoming call reservation. `zone` – The name of zone for this trunk group. NOTE: This statistic is only available from CLI.
`icmpGeneralGroupStatistics`	The collection of ICMP General Group information for the specified instance. `<server name>` – Name of the server. `inDestUnreachs` – The number of ICMP Destination Unreachable messages received. `inEchoReps` – The number of ICMP Echo Reply messages received. `inEchos` – The number of ICMP Echo (request) messages received. `inErrors` – The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). `inMsgs` – The total number of ICMP messages which the entity received. `outDestUnreachs` – The number of ICMP Destination Unreachable messages sent. `outEchoReps` – The number of ICMP Echo Reply messages sent. `outEchos` – The number of ICMP Echo (request) messages sent. `outErrors` – The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. `outMsgs` – The total number of ICMP messages which this entity attempted to send.
`ipGeneralGroupStatistics`	The collection of IP General Group information for the specified instance. `<server name>` – Name of the server. `fragFails` – The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their 'Don't Fragment' flag was set. `fragOKs` – The number of IP datagrams that have been successfully fragmented at this entity. `inAddrErrors` – The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. `inDelivers` – The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). `inDiscards` – The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). `inHdrErrors` – The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc. `inReceives` – The total number of input datagrams received from interfaces, including those received in error. `inUnknownProtos` – The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. `outDiscards` – The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). `outNoRoutes` – The number of IP datagrams discarded because no route could be found to transmit them to their destination. `outRequests` – The total number of IP datagrams which local IP user- protocols (including ICMP) supplied to IP in requests for transmission. `reasmFails` – The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc). `reasmOKs` – The number of IP datagrams successfully re-assembled. `reasmReqds` – The number of IP fragments received which needed to be reassembled at this entity. `reasmTimeout` – The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
`monitorEndpointStatus`	The status of the MCT setting.
`monitorTargetStatus`	The status of the monitor target
`ocsCallCountStatus`	Call count statistics for the server. `attemptedCall` – Total Number of OCS attempted Calls. `establishedCalls` – Total Number of OCS Establised Calls. `failedCalls` – Total Number of OCS Failed Calls. `pendingCalls` – Total Number of OCS Pending Calls. `rejectedCalls` – Total Number of OCS rejected Calls. `relayedCall` – Total Number of OCS Relayed Calls. `successfulCalls` – Total Number of OCS successful Calls.
`policyServer`	Policy Server Statistics. `CdDNBasedDestAllowedTable` – The Traffic Management related counters for allowed called DN based destination `CdDNBasedDestBlockedTable` – The Traffic Management related counters for blocked called DN based destination. `contractorBasedOrigAllowedTable` – The Traffic Management related counters for allowed contractor number based origination. `contractorBasedOrigBlockedTable` – The Traffic Management related counters for blocked contractor number based origination. `dialedDestAllowedTable` – The Traffic Management related counters for allowed dialed destination number. `dialedDestBlockedTable` – The Traffic Management related counters for blocked dialed destination number. `dnsEnumCounters` – Policy DNS ENUM query counters `failureCounters` – Policy failure counters `finalCallingNumberAllowedTable` – The Traffic Management related counters for allowed final calling number. `finalCallingNumberBlockedTable` – he The Traffic Management related counters for blocked final calling number. `finalDestAllowedTable` – The Traffic Management related counters for allowed final destination number. `finalDestBlockedTable` – The Traffic Management related counters for blocked final destination number. `hpcCallsPerGsxTable` – The Ingress PSTN HPC Calls related counters per GSX table. `hpcExemptionGsxTable` – The Traffic Management HPC Exemption related counters per GSX table. `lnpGsxTable` – The LNP related counters per GSX table. `lnpTfCounters` – Policy LNP and toll-free counters `mwiServiceCounters` – Policy Message Waiting Indicator service counters `originationAllowedTable` – The number of calls for which a origination number with a provisioned Traffic control was allowed to complete. `originationBlockedTable` – The number of calls for which a origination number with a provisioned Traffic control was blocked. `policyReqCounters` – Policy request counters `serviceUsageCounters` – Policy service usage counters `sipCounters` – Policy SIP message counters `sipE911Counters` – Policy E911 service counters `translatedDestAllowedTable` – The Traffic Management related counters for allowed translated destination number. `translatedDestBlockedTable` – The Traffic Management related counters for blocked translated destination number.
`servers`	Global configuration details for ENUM and E911 servers. callRecordingCriteria – Call Recording Criteria details. `name` – Call Recording Criteria name. `srsGroupId` – Session Recording Server (SRS) Group Profile identifier. `ingressTgId` – Ingress trunk group Id. `EgressTgId` – Egress trunk group Id. `callingPartyId` – The calling party number for which the call is recorded. `calledPartyId` – The called party number for which the call is recorded. `nextHopIp` – IP address of the next hop. `previousHopIp` – IP address of the previous hop. `recordingType` – The call legs to record. `gwId` – The gateway Id. `recordingStopCriteria` – The criteria to stop the recording. `numberOfCalls` – The number of calls to occur to stop the recording criteria. `recordingDuration` – Duration of the recording, in seconds. `recorderType` – Call recorder type. `criteriaState` – Administrative state of this Call Recording Criteria.
`signaling`	See Statistics for 'show table global' Only Command section.
`system`	SBC instances with minimal impact on the existing calls and registrations are removed by allocating time for those sessions to terminate on their own. `nodeStatus` – Displays the current system global status.
`tcpGeneralGroupStatistics`	The collection	`tcpGeneralGroupStatistics`	The collection of TCP General Group information for the specified instance. `clientConnections` – The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSE state. `establishedConnections` – The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT. `failedAttempts` – The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. `inErrors` – The total number of segments received in error (e.g., bad TCP checksums). `inResets` – The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. `inSegments` – The total number of segments received, including those received in error. `outResets` – The number of TCP segments sent containing the RST flag. `outSegments` – The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. `retransSegments` – The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. `serverConnections` – The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
`udpGeneralGroupStatistics`	The collection of UDP General Group information for the specified instance. `inDatagrams` – The total number of UDP datagrams delivered to UDP users. `inErrors` – The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. `outDatagrams` – The total number of UDP datagrams sent from this entity. `unknownPorts` – The total number of received UDP datagrams for which there was no application at the destination port.

CAC Statistics

Caption

0	Table
1	CAC Statistics
3	CAC Statistics

Parameter	Description
`sharedCacCurrentStatistics`	The shared CAC-limits pool current statistics. `activeRegs` – The current number of active registrations of this shared CAC-limits pool. `activeSubs` – The current number of active subscriptions on this shared CAC-limits pool. `inBwUsage` – The sum of BW usage (expected data rate in Kbits per second multiplied by call duration in seconds) for every inbound call associated with this shared CAC-limits pool. `maxActiveBwUsage` – The high watermark of BW usage in either direction associated with this shared CAC-limits pool. `maxActiveCalls` – The current high watermark of total number of active calls in both the inbound and outbound directions bound by limits of this shared CAC-limits pool. `maxActiveRegs` – The current high watermark of registrations subject to limits of this shared CAC-limits pool. `maxActiveSubs` – The current number of maximum active subscriptions on this shared CAC-limits pool. `outBwUsage` – The total bandwidth usage for every outbound associated with this shared CAC-limits pool using the formula: expected data rate in Kbits per second multiplied by call duration in seconds.
`sharedCacFailureCurStats`	The shared CAC-limits pool current failure statistics. `allocFailBwLimit` – The number of failed bandwidth requests due to this shared CAC-limits pool exceeding the configured bandwidth limit. `allocFailCallLimit` – The number of failed call requests due to this shared CAC-limits pool exceeding the configured call limit. `allocFailParentConstraint` – The current number of failures due to a parent limit denial. `allocFailSipReg` – The current number of failed SIP registration attempts due to this shared CAC-limits pool exceeding the configured registration limit. `sipOtherReqFailPolicing` – The current number of failed SIP other non-INVITE attempts due to policing on this shared CAC-limits pool. `sipSubsFailPolicing` – The current number of failed SIP Subscribe attempts due to policing on this shared CAC-limits pool. `videoThresholdLimit` – The number of video streams that exceeded the threshold limit for this shared CAC-limits pool.
`sharedCacFailureIntStats`	The shared CAC-limits pool interval failure statistics. `allocFailBwLimit` – The number of failed bandwidth requests due to this shared CAC-limits pool exceeding the configured bandwidth limit for the specified interval. `allocFailCallLimit` – The number of failed call requests due to this shared CAC-limits pool exceeding the configured call limit for the specified interval. `allocFailParentConstraint` – The current number of failures due to a parent limit denial for the specified interval. `allocFailSipReg` – The current number of failed SIP registration attempts due to this shared CAC-limits pool exceeding the configured registration limit for the specified interval. `sipOtherReqFailPolicing` – The current number of failed SIP other non-INVITE attempts due to policing on this shared CAC-limits pool for the specified interval. `sipSubsFailPolicing` – The current number of failed SIP Subscribe attempts due to policing on this shared CAC-limits pool for the specified interval. `time` – The system up-time when this interval statistic is collected. `videoThresholdLimit` – The number of video streams that exceeded the threshold limit for this shared CAC-limits pool for the specified interval.
`sharedCacIntervalStatistics`	The shared CAC-limits pool statistics for the specified interval. `activeRegs` – The number of active registrations of this shared CAC-limits pool for the specified interval. `activeSubs` – The number of active subscriptions on this shared CAC-limits pool for the specified interval. `inBwUsage` – The total bandwidth usage for every inbound call associated with this shared CAC-limits pool using the formula: expected data rate in Kbits per second multiplied by call duration in seconds. `intervalValid` – A value of "true" indicates this interval is valid. `maxActiveBwUsage` – The high watermark of bandwidth usage in either direction associated with this shared CAC-limits pool for the specified interval. `maxActiveCalls` – The high watermark of total number of active calls in both the inbound and outbound directions bound by limits of this shared CAC-limits pool for the specified interval. `maxActiveRegs` – The high watermark of registrations subject to limits of this shared CAC-limits pool for the specified interval. `maxActiveSubs` – The number of maximum active subscriptions on this shared CAC-limits pool for the specified interval. `outBwUsage` – The total bandwidth usage for every outbound associated with this shared CAC-limits pool using the formula: expected data rate in Kbits per second multiplied by call duration in seconds. `time` – The system up-time when this interval statistic is collected.
`sharedCacStatus`	Current status of the shared CAC-limits pool. `bwAvailable` – The amount of bandwidth available for allocation. `bwInboundUsage` – The amount of bandwidth in use for inbound traffic. `bwOutboundUsage` – The amount of bandwidth in use for outbound traffic. `inboundCallsUsage` – The current inbound or incoming usage on this shared CAC-limits pool. `outboundCallsUsage` – The current outbound, non-priority usage on this shared CAC-limits pool. `sipRegActive` – The number of active SIP registrations on this shared CAC-limits pool. `sipSubsActive` – The number of active SIP subscriptions on this shared CAC-limits pool. `totalCallsAvailable` – The sum total of all available calls on this shared CAC-limits pool.

Call Detail Status

Caption

0	Table
1	Call Detail Status Data
3	Call Detail Status Data

Statistic	Description
	General Fields:
`<GCID>`	Unique global call identifier (GCID).
`mediaStreams`	Type of media streams (audio, video) in the call.
`state`	Current state of the call.
`callingNumber`	Calling Party's E.164 telephone number.
`calledNumber`	Valled Party's E.164 telephone number.
`addressTransPerformed`	Type of address translation (such as LNP, 800) performed on the called party number, if any.
`origCalledNum`	Original Called Party number (if an address translation has been performed on the called party).
`scenarioType`	Call scenario type for this call.
`callDuration`	Call duration (in seconds) following an answer.
`mediaType`	Media type for this active call.
`iceCallTypes`	ICE call types for this call (for example ing-lcl-ICE-LITE, ing-rmt-FULL-ICE, eg-lcl-ICE-LITE, eg-rmt-FULL-ICE.)
`egressSessionBandwidthkbps`	The current allocated session bandwidth, in Kbps, on the egress leg. If no session bandwidth is used, value is "0".
`ingressSessionBandwidthkbps`	The current allocated session bandwidth, in Kbps, on the ingress leg. If no session bandwidth is used, value is "0". NOTE: The `IceState` for each stream displays as "ST_ICE_COMPLETE" only when remote IP of all the streams in the call are learned.
Media Streams 1-6 will contain the following status details (medial stream 1 is used as the example below):
`mediaTypeStream1`	The type of codec relayed or transcoded in stream 1
`associatedGcidLegId1`	Call leg ID corresponding to `associatedGcid1`.
`associatedGcid1`	GCID of another call which is associated with this call.
`ingressDtlsSrtpStream1`	Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.
`ingressMediaStream1IceState`	Ingress local ice mode for the ingress MediaStream1.
`ingressMediaStream1Bandwidth`	Bandwidth allocated for the ingress MediaStream1.
`ingressMediaStream1LocalIp`	Local signaling IP address for ingress MediaStream1.
`ingressMediaStream1LocalPort`	Local RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).
`ingressMediaStream1RemoteIp`	Remote signaling IP address for ingress MediaStream1.
`ingressMediaStream1RemotePort`	Remote RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).
`ingressMediaStream1Security`	Security parameters for the ingress MediaStream1.
`ingressPrivStream1LocalIpSockAddr`	The Ingress Leg local media IP and port offered by DSBC in the INVITE message to MRF in the format "<Ingress-Private-XRES-Local-IP>/<Port> (rtcp: <rtcpPort>)";
`ingressPrivStream1RemoteIpSockAddr`	The Ingress Leg remote media IP and port present in the answer SDP received from MRF in the format "<Ingress-Private-XRES-Remote-IP>/<Port> (rtcp: <rtcpPort>)";
`ingressRemoteIpSockAddr`	IP address of the Ingress remote peer
`ingressTrunkName`	Ingress trunk group name used for the call
`ingressZoneName`	Ingress zone name for the call.
`egressDtlsSrtpStream1`	Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.
`egressMediaStream1IceState`	Egress local ice mode for the egress MediaStream1.
`egressMediaStream1Bandwidth`	Bandwidth allocated for the egress MediaStream1.
`egressMediaStream1LocalIp`	Local signaling IP address for egress MediaStream1.
`egressMediaStream1LocalPort`	Local RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).
`egressMediaStream1RemoteIp`	Remote signaling IP address for egress MediaStream1.
`egressMediaStream1RemotePort`	Remote RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).
`egressMediaStream1Security`	Security parameters for the egress MediaStream1.
`egressPrivStream1LocalIpSockAddr`	The Egress Leg local media IP and port offered by DSBC in the INVITE message to MRF in the format "<Egress-Private-XRES-Local-IP>/<Port> (rtcp: <rtcpPort>)";
`egressPrivStream1RemoteIpSockAddr`	The Egress Leg remote media IP and port present in the answer SDP received from MRF in the format "<Egress-Private-XRES-Remote-IP>/<Port> (rtcp: <rtcpPort>)";
`egressRemoteIpSockAddr`	IP address of the Egress remote peer
`egressTrunkName`	Egress trunk group name used for the call
`egressZoneName`	Egress zone name for the call
`mrfSignalingInfo`	Signaling IP address/port of the MRF.

Info

title	Note

The following statistics are deprecated:

ingressMediaStream1LocalIpSockAddr
ingressMediaStream1RemoteIpSockAddr

Call Media Status Statistics

Caption

0	Table
1	Call Media Status Statistics
3	Call Media Status Statistics

Statistic	Description
`egressACName`	The egress Address Context name
`egressMediaStream1InterarrivalJitter`	The variation of packet inter-arrival time of egress MediaStream1 for this call
`egressMediaStream1OctetsReceived`	The number of octets received in egress MediaStream1 for this call
`egressMediaStream1OctetsSent`	The number of octets sent in egress MediaStream1 for this call
`egressMediaStream1PacketLatency`	The packet latency in the egress MediaStream1 for this call
`egressMediaStream1PacketsDiscarded`	The number of packets discarded in egress MediaStream1 for this call
`egressMediaStream1PacketsLost`	The number of packets lost in egress MediaStream1 for this call
`egressMediaStream1PacketsReceived`	The number of packets received in egress MediaStream1 for this call
`egressMediaStream1PacketsSent`	The number of packets sent in egress MediaStream1 for this call
`egressMediaStream1RtcpPacketsReceived`	The number of RTCP packet received in egress MediaStream1 for this call (if RTCP is enabled for this call leg)
`egressMediaStream1RtcpPacketsSent`	The number of RTCP packet sent in egress MediaStream1 for this call (if RTCP is enabled for this call leg)
`egressMediaStream1SrtpAuthFailure`	The number of RTP authentication failures on egress leg
`egressMediaStream1SrtpReplayFailure`	The number of RTP anti-replay failures on egress leg
`egressMediaStream1StunDtlsPacketsReceived`	The number of STUN/DTLS packets received on egress leg
`egressMediaStream1StunDtlsPacketsDiscarded`	The number of STUN/DTLS packets discarded on egress leg
`egressRemoteIpSockAddr`	IP address of the Egress remote peer
`egressRemotePort`	Remote media port for the egress call leg
`egressRemPacketsLost`	The number of remote packets lost for this call leg
`egressRFactorInbound`	The inbound R-Factor threshold utilization value (as a percentage) on egress leg
`egressRFactorOutbound`	The outbound R-Factor threshold utilization value (as a percentage) on egress
`egressTrunkName`	Egress trunk group name used for the call
`egressZoneName`	Egress zone name for the call
`ingressACName`	Ingress Address Context name
`ingressMediaStream1InterarrivalJitter`	The variation of packet inter-arrival time of ingress MediaStream1 for this call
`ingressMediaStream1OctetsReceived`	The number of octets received in ingress MediaStream1 for this call
`ingressMediaStream1OctetsSent`	The number of octets sent in ingress MediaStream1 for this call
`ingressMediaStream1PacketLatency`	The packet latency in the ingress MediaStream1 for this call
`ingressMediaStream1PacketsDiscarded`	The number of packets discarded in ingress MediaStream1 for this call
`ingressMediaStream1PacketsLost`	The number of packets lost in ingress MediaStream1 for this call
`ingressMediaStream1PacketsReceived`	The number of packets received in ingress MediaStream1 for this call
`ingressMediaStream1PacketsSent`	The number of packets sent in ingress MediaStream1 for this call
`ingressMediaStream1RtcpPacketsSent`	The number of RTCP packets sent in ingress MediaStream1 for this call (if RTCP is enabled for this call leg). Includes RTCP port, if enabled, for this call leg.
`ingressMediaStream1RtcpPacketsReceived`	The number of RTCP packets received in ingress MediaStream1 for this call (if RTCP is enabled for this call leg). Includes RTCP port, if enabled, for this call leg.
`ingressMediaStream1SrtpAuthFailure`	The number of RTP authentication failures on ingress leg
`ingressMediaStream1SrtpReplayFailure`	The number of RTP anti-replay failures on ingress leg
`ingressMediaStream1StunDtlsPacketsReceived`	The number of STUN/DTLS packets received on ingress leg
`ingressMediaStream1StunDtlsPacketsDiscarded`	The number of STUN/DTLS packets discarded on ingress leg
`ingressRemoteIpSockAddr`	IP address of the Ingress remote peer
`ingressRemPacketsLost`	The number of remote packets lost for this call leg
`ingressRemotePort`	Remote media port for the ingress call leg
`ingressRFactorInbound`	The inbound R-Factor threshold utilization value (as a percentage) on ingress leg
`ingressRFactorOutbound`	The outbound R-Factor threshold utilization value (as a percentage) on ingress leg
`ingressTrunkName`	Ingress trunk group name used for the call
`ingressZoneName`	Ingress zone name for the call.
`mediaStream1Codec`	The codec for this media stream
`mediaStream1Label`l	The label applied to this media stream

Statistics for 'show table global' Only CommandParameters - 'show table global' only
Service Authorization Statistics
Available_since
Type Available Since
Release 6.2.1

Caption
0 Table
1
Service Authorization Statistics
Parameter Description
callRouting
Global Call Routing objects.
route – Route statistics:
Element Type
Element ID1
Element ID2
Routing Type
Destination National
Destination Country
Call Type
Digit Type
Range Profile
Filter Profile
Domain Name
Routing Label
routingLabel – Routing Label statistics:
Name
Overflow Number
Overflow NOA
Overflow NPI
Route Prioritization Type
Route Prioritization Type For Equal Cost Routes
Script
Action
Num Routes Per Call
Sequence
Trunk Group
IP Peer
Proportion
Cost
In Service
Testing
callTrace
Call Trace group configuration for the Node.
callFilter – This table contains call trace filters for the node.
callTraceTimer – The call trace timer value.
errorFilter – The error filter to apply system wide.
maxTriggerCount – The trigger count for both call and error trace filters.
signalingPacketCapture – This entry contains signaling packet capture devices and admin state.
carrier
Carrier definitions.
<id> – A unique identifier for this carrier.
services classOfService – Class of service associated with this carrier.
country
Country definitions.
<id> – A unique country identifier.
listOfNumberOfDigitsToMatch – List of digit lengths in called/calling numbers for pattern matching.
called – List of digit lengths (comma-separated) in Called Number for pattern matching.
calling – List of digit lengths (comma-separated) in Calling Number for pattern matching.
criteria – List of digit lengths (comma-separated) in Called Number for pattern matching when determining if number translation is required.
variableLengthDialPlan – Indicates whether a variable length dial plan is enabled or disabled.
license
sessionThreshold – The current threshold limit for the number of licensed sessions.
monitorEndpoint
The current monitor endpoint (MCT) settings. Fields include:
Name
Trunk Group
IP Address
Port Number
State
monitorTarget
The current monitor target settings. Fields include:
name – Target name.
gcid – The target GCID (Global Call Identifier) to tap.
monitorEndpoint – Name of endpoint to use for recording
monitorLeg – Specifies which leg to tap (all, both, egress, ingress)
duration – The duration (in seconds) that the monitor target is tapped.
state – Administrative state of the monitor target configuration
npaNxx <npaNxx code>
National destination code settings. The fields include:
national – National destination code
portedFlag – The portedFlag state
qoeCallRouting
QoS-based call routing table.
mediaQosBasedRouting – The status of the flag for Media QoS KPI calculation and validation
signalingQosBasedRouting – The status of the flag for Signaling QoS KPI calculation and validation
script
List of pre-seeded scripts used for call control. The fields include:
<script name>
description
majorVersion
minorVersion
security ipsec
System-wide IPSec settings.
ikeRetransmitCount – Ike Message retransmission count
ikeRetransmitInterval – Ike Message retransmission interval in seconds
servers
Global configuration details for ENUM and E911 servers.
dns – DNS Global configuration parameters
iterationCount – The global Iteration count limit for DNS iterations of server requests.
monitoringInterval – The global monitoring interval (in secs) for DNS Servers.
probeInterval – The global probe interval (in secs) for blacklisted DNS Servers.
retransmissionCount – The global retransmission count limit for DNS iterations of server requests.
retransmissionTimer – The global retransmission timer value for DNS iterations of server requests.
timeouts – The global number of timeouts for blacklisting a DNS Server.
e911 – Enhanced 911 service
e911VpcDevice – E911 VPC Device.
enumDomainName – Private domain used for launching this ENUM service.
enumDomainNameLabel – The DNS Zone label associated with the specified DNS Zone.
enumService – ENUM service (lnp, cnam, sipAor).
lwresdProfile – LWRESD Profile name.
srsGroupProfile – Session Recording Server (SRS) Group Profile configuration.
name –
description –
loadDistribution –
numSimultaneousStream –
priority –
transport –
ipAddress –
ipPort –
ipTgid –
signaling
Global Signaling objects
gwSigTimers – This table contains information about GW Signaling Timers for the node.
congRelDelay – The amount of time (in seconds) that a call which is rejected due to congestion will be delayed before the release is issued.
establish – The Gateway Signal Channel Establishment Timer (in seconds.) This value applies to all signal channels
idle – The amount of time (in hours) a GW Signaling Link May be idle before it is taken down.
keepalive – This is the Gateway Signal Channel Keepalive Timer (in seconds.) This value applies to all signal channels
retry – The amount of time (in minutes) the GSX will continue to attempt to recover a GW Signaling Link as long as there are stable calls up
h323SigTimers – Global H323 Signaling Timers configuration
establish – H225 signal channel establishment timer (in seconds)
t301 – T301 call timer (in seconds)
t302 – T302 call timer (in seconds)
t303 – T303 call timer (in seconds)
t304 – The T304 call timer (in seconds)
t310 – T310 call timer (in seconds)
tcpConnect – TCP connect timer (in seconds)
sipPeerOverloadControl – Global SIP Peer Overload configuration.
discardPeriod – Discard period (in seconds) for the Peer Overload back-off algorithm.
rejectThreshold – Reject threshold (in rejects/sec) for the Peer Overload back-off algorithm.
samplingPeriod – Sampling period (in seconds) for the Peer Overload back-off algorithm.
stepDownGain – Step down gain for the Peer Overload back-off algorithm.
sipSigControls – Global SIP Signaling Control settings.
egressRNParam – Flag to enable/disable sending RN parameter on egress.
loopDetectionFeature – Flag to perform SIP loop detection on SIP INVITEs as described in RFC3261.
maxPduSizeValue – The maximum SIP PDU size.
multipleContactsPerAor – Flag to support multiple different contacts for same AoR.
registrarSupportContactParam – Flag to determine if the registrar supports contact parameters and will echo such parameters in the RURI.
sendSurrogateUnRegAfterReboot – Flag to trigger de-register messages to all AORs configured to use the Surrogate Registration feature after a reboot.
suppressErrorInfoHdr – Flag to suppress the Error-Info header in a 400 response.
surrogateRegisterPacingTime – The time gap (in milliseconds) between a final response of surrogate register and next surrogate register message sent across all peers.
ucidNodeId – UCID Node Id to be used to generate UCID in the User-to-User Header.
sipDomain
SIP Domain name.
subscriber
Subscriber configuration settings.
ID – Unique identifier for Subscriber.
country – Country in which the subscriber resides.
owningCarrier – A 3 or 4-digit Carrier ID number that represents the Carrier who owns the subscriber. Each Carrier can have specific services configured for Subscriber calling numbers.
packetServiceProfile – The packet service profile used to override the IP trunk groups packet service profile.
classOfService – Class of service assigned to the subscriber.

Command Examples

Code Block
language none
> show table global siprecStatus RECORDER RX RTP TX RTP RECORDING GCID ADDRESS ADDRESS ADDRESS LEG 1 10.11.12.13:5060 10.11.12.13:8000 10.11.12.13:8002 ingress
To view call detail status:
Code Block
language none
> show status global callDetailStatus callDetailStatus 786432 { mediaStreams audio; state Stable; callingNumber 67890000; calledNumber 2345; addressTransPerformed none; origCalledNum ""; scenarioType SIP_TO_SIP; callDuration 9; mediaType passthru; associatedGcid1 786432; associatedGcid2 786432; associatedGcidLegId1 1; associatedGcidLegId2 0; ingressMediaStream1LocalIpSockAddr "10.54.25.26/ 1024 (rtcp: 1025)"; ingressMediaStream1RemoteIpSockAddr "10.34.13.243/ 6000 (rtcp: 6001)"; egressMediaStream1LocalIpSockAddr "10.54.27.26/ 1024 (rtcp: 1025)"; egressMediaStream1RemoteIpSockAddr "10.34.13.252/ 6000 (rtcp: 6001)"; ingressMediaStream1Security "rtp-disabled rtcp-disabled"; egressMediaStream1Security "rtp-disabled rtcp-disabled"; ingressMediaStream1Bandwidth 127; egressMediaStream1Bandwidth 127;
To view call media status:
serviceAuthorisedCurStats
The global current service authorization current statistics.
entry – A dummy key is added to non-config scalar element container, though only one row is allowed in container.
amrnbLegAuthorisation – If set to "1", amrnb license is available at the SBC.
amrwbLegAuthorisation – If set to "1", amrwb license is available at the SBC.
capacityLicenseAuthorisation – If set to "1", Capacity license is available at the SBC.
dspG722SessionsAuthorisation – If set to "1", DspG722 license is available at the SBC.
e911SessionsAuthorisation – If set to "1", E911 license is available at the SBC.
encryptAuthorisation – If set to "1", encrypt license is available at the SBC.
enhancedVideoAuthorisation – If set to "1", video license is available at the SBC.
enumSessionsAuthorisation – If set to "1", ENUM license is available at the SBC.
evrcLegAuthorisation – If set to "1", evrc license is available at the SBC.
gmp1x10SessionsAuthorisation – If set to "1", 1X10GMP license is available at the SBC.
gmp4x1SessionsAuthorisation – If set to "1", 4X1GMP license is available at the SBC.
liSessionsAuthorisation – If set to "1", LI license is available at the SBC.
licenseMode – Displays the current licensing mode of SBC.
mrfSessionsAuthorisation – If set to "1", mrf license is available at the SBC.
name – The name of the license-dependent feature.
niceRecAuthorisation – If set to "1", nicerec license is available at the SBC.
polRtuSessionsAuthorisation – If set to "1", PolRtu license is available at the SBC.
psxRtuSessionsAuthorisation – If set to "1", PsxRtu license is available at the SBC.
sbcRtuSessionsAuthorisation – If set to "1", SbcRtu session license is available at the SBC.
sip323SessionsAuthorisation – If set to "1", SipRec license is available at the SBC.
sipISessionsAuthorisation – If set to "1", SipI license is available at the SBC.
srtpAuthorisation – If set to "1", srtp license is available at the SBC.
swInstanceLicenseAuthorisation – If set to "1", SweInstance license is available at the SBC.

serviceAuthorisedIntStats
The global interval service authorization statistics.
amrnbLegAuthorisation – If set to "1", amrnb license is available at the SBC.
amrwbLegAuthorisation – If set to "1", amrwb license is available at the SBC.
capacityLicenseAuthorisation – If set to "1", Capacity license is available at the SBC.
dspG722SessionsAuthorisation – If set to "1", DspG722 license is available at the SBC.
e911SessionsAuthorisation – If set to "1", E911 license is available at the SBC.
encryptAuthorisation – If set to "1", encrypt license is available at the SBC.
enhancedVideoAuthorisation – If set to "1", video license is available at the SBC.
enumSessionsAuthorisation – If set to "1", ENUM license is available at the SBC.
evrcLegAuthorisation – If set to "1", evrc license is available at the SBC.
gmp1x10SessionsAuthorisation – If set to "1", 1X10GMP license is available at the SBC.
gmp4x1SessionsAuthorisation – If set to "1", 4X1GMP license is available at the SBC.
intervalValid – Indicates the validity of the interval.
liSessionsAuthorisation – If set to "1", LI license is available at the SBC.
licenseMode – Displays the licensing mode of SBC.
mrfSessionsAuthorisation – If set to "1", mrf license is available at the SBC.
name – The name of the license-dependent feature.
niceRecAuthorisation – If set to "1", nicerec license is available at the SBC.
number – A sequence number identifying the statistics interval collected during the interval period.
polRtuSessionsAuthorisation – If set to "1", PolRtu license is available at the SBC.
psxRtuSessionsAuthorisation – If set to "1", PsxRtu license is available at the SBC.
sbcRtuSessionsAuthorisation – If set to "1", SbcRtu session license is available at the SBC.
sip323SessionsAuthorisation – If set to "1", SipRec license is available at the SBC.
sipISessionsAuthorisation – If set to "1", SipI license is available at the SBC.
srtpAuthorisation – If set to "1", srtp license is available at the SBC.
swInstanceLicenseAuthorisation – If set to "1", SweInstance license is available at the SBC.
time – The system "up" time when the interval statistic is collected.

Statistics for 'show table global' Only Command
Caption
0 Table
1 Parameters - 'show table global' only
Parameter Description
callRouting
Global Call Routing objects.
route – Route statistics:
Element Type
Element ID1
Element ID2
Routing Type
Destination National
Destination Country
Call Type
Digit Type
Range Profile
Filter Profile
Domain Name
Routing Label
routingLabel – Routing Label statistics:
Name
Overflow Number
Overflow NOA
Overflow NPI
Route Prioritization Type
Route Prioritization Type For Equal Cost Routes
Script
Action
Num Routes Per Call
Sequence
Trunk Group
IP Peer
Proportion
Cost
In Service
Testing
callTrace
Call Trace group configuration for the Node.
callFilter – This table contains call trace filters for the node.
callTraceTimer – The call trace timer value.
errorFilter – The error filter to apply system wide.
maxTriggerCount – The trigger count for both call and error trace filters.
signalingPacketCapture – This entry contains signaling packet capture devices and admin state.
carrier
Carrier definitions.
<id> – A unique identifier for this carrier.
services classOfService – Class of service associated with this carrier.
country
Country definitions.
<id> – A unique country identifier.
listOfNumberOfDigitsToMatch – List of digit lengths in called/calling numbers for pattern matching.
called – List of digit lengths (comma-separated) in Called Number for pattern matching.
calling – List of digit lengths (comma-separated) in Calling Number for pattern matching.
criteria – List of digit lengths (comma-separated) in Called Number for pattern matching when determining if number translation is required.
variableLengthDialPlan – Indicates whether a variable length dial plan is enabled or disabled.
license
sessionThreshold – The current threshold limit for the number of licensed sessions.
monitorEndpoint
The current monitor endpoint (MCT) settings. Fields include:
Name
Trunk Group
IP Address
Port Number
State
monitorTarget
The current monitor target settings. Fields include:
name – Target name.
gcid – The target GCID (Global Call Identifier) to tap.
monitorEndpoint – Name of endpoint to use for recording
monitorLeg – Specifies which leg to tap (all, both, egress, ingress)
duration – The duration (in seconds) that the monitor target is tapped.
state – Administrative state of the monitor target configuration
npaNxx <npaNxx code>
National destination code settings. The fields include:
national – National destination code
portedFlag – The portedFlag state
qoeCallRouting
QoS-based call routing table.
mediaQosBasedRouting – The status of the flag for Media QoS KPI calculation and validation
signalingQosBasedRouting – The status of the flag for Signaling QoS KPI calculation and validation
script
List of pre-seeded scripts used for call control. The fields include:
<script name>
description
majorVersion
minorVersion
security ipsec
System-wide IPSec settings.
ikeRetransmitCount – Ike Message retransmission count
ikeRetransmitInterval – Ike Message retransmission interval in seconds
servers
Global configuration details for ENUM and E911 servers.
dns – DNS Global configuration parameters
iterationCount – The global Iteration count limit for DNS iterations of server requests.
monitoringInterval – The global monitoring interval (in secs) for DNS Servers.
probeInterval – The global probe interval (in secs) for blacklisted DNS Servers.
retransmissionCount – The global retransmission count limit for DNS iterations of server requests.
retransmissionTimer – The global retransmission timer value for DNS iterations of server requests.
timeouts – The global number of timeouts for blacklisting a DNS Server.
e911 – Enhanced 911 service
e911VpcDevice – E911 VPC Device.
enumDomainName – Private domain used for launching this ENUM service.
enumDomainNameLabel – The DNS Zone label associated with the specified DNS Zone.
enumService – ENUM service (lnp, cnam, sipAor).
lwresdProfile – LWRESD Profile name.
srsGroupProfile – Session Recording Server (SRS) Group Profile configuration.
name – SRS Group Profile name
description – Descriptive text about this SRS Group Profile
loadDistribution – The load distribution scheme for this SRS Group Profile
numSimultaneousStream – The number of simultaneous media streams for this SRS Group Profile
priority – The priority index of SRS group data
transport – The transport type for the SRS
ipAddress – IP address of the SRS
ipPort – TCP/UDP port for the SRS
ipTgid – IP trunk group ID used for the SRS
signaling
Global Signaling objects
gwSigTimers – This table contains information about GW Signaling Timers for the node.
congRelDelay – The amount of time (in seconds) that a call which is rejected due to congestion will be delayed before the release is issued.
establish – The Gateway Signal Channel Establishment Timer (in seconds.) This value applies to all signal channels
idle – The amount of time (in hours) a GW Signaling Link May be idle before it is taken down.
keepalive – This is the Gateway Signal Channel Keepalive Timer (in seconds.) This value applies to all signal channels
retry – The amount of time (in minutes) the GSX will continue to attempt to recover a GW Signaling Link as long as there are stable calls up
h323SigTimers – Global H323 Signaling Timers configuration
establish – H225 signal channel establishment timer (in seconds)
t301 – T301 call timer (in seconds)
t302 – T302 call timer (in seconds)
t303 – T303 call timer (in seconds)
t304 – The T304 call timer (in seconds)
t310 – T310 call timer (in seconds)
tcpConnect – TCP connect timer (in seconds)
sipPeerOverloadControl – Global SIP Peer Overload configuration.
discardPeriod – Discard period (in seconds) for the Peer Overload back-off algorithm.
rejectThreshold – Reject threshold (in rejects/sec) for the Peer Overload back-off algorithm.
samplingPeriod – Sampling period (in seconds) for the Peer Overload back-off algorithm.
stepDownGain – Step down gain for the Peer Overload back-off algorithm.
sipSigControls – Global SIP Signaling Control settings.
egressRNParam – The egress RN parameter. Specifies whether the SBC sends a Redirecting Number Information Element (RNIE) in the egress leg of the call per RFC3398 when the R-URI and the To header differ.
disabled
enabled (default)
loopDetectionFeature – Flag to perform SIP loop detection on SIP INVITEs as described in RFC3261.
maxPduSizeValue – The maximum SIP PDU size.
multipleContactsPerAor – Flag to support multiple different contacts for same AoR.
registrarSupportContactParam – Flag to determine if the registrar supports contact parameters and will echo such parameters in the RURI.
sendSurrogateUnRegAfterReboot – Flag to trigger de-register messages to all AORs configured to use the Surrogate Registration feature after a reboot.
suppressErrorInfoHdr – Flag to suppress the Error-Info header in a 400 response.
surrogateRegisterPacingTime – The time gap (in milliseconds) between a final response of surrogate register and next surrogate register message sent across all peers.
ucidNodeId – UCID Node Id to be used to generate UCID in the User-to-User Header.
sipDomain
SIP Domain name.
subscriber
Subscriber configuration settings.
ID – Unique identifier for Subscriber.
country – Country in which the subscriber resides.
owningCarrier – A 3 or 4-digit Carrier ID number that represents the Carrier who owns the subscriber. Each Carrier can have specific services configured for Subscriber calling numbers.
packetServiceProfile – The packet service profile used to override the IP trunk groups packet service profile.
classOfService – Class of service assigned to the subscriber.

Command Examples

Code Block
language none
> show table global siprecStatus RECORDER RX RTP TX RTP RECORDING GCID ADDRESS ADDRESS
Code Block
language none
> show status global callMediaStatus callMediaStatus 786432 { mediaStreamsInCall ADDRESS audio;LEG 1 ingressMacHeader 10.11.12.13:5060 10.11.12.13:8000 10.11.12.13:8002 ingress

To view call detail status:
Code Block
language none
> show status global callDetailStatus callDetailStatus 786432 { mediaStreams 64-0-F1-FD-B3-7F; egressMacHeader audio; state 64-0-F1-FD-B3-7F; ingressBearerType Stable; callingNumber voice; egressBearerType 67890000; calledNumber voice; ingressCfgAudioType 2345; addressTransPerformed G711; none; egressCfgAudioType origCalledNum G711""; ingressActAudioTypescenarioType naSIP_TO_SIP; egressActAudioTypecallDuration 9; na; mediaType ingressRemPacketsLost 0passthru; ingressRFactorInboundassociatedGcid1 93786432; ingressRFactorOutboundassociatedGcid2 93786432; egressRemPacketsLostassociatedGcidLegId1 01; egressRFactorInboundassociatedGcidLegId2 0; ingressMediaStream1LocalIpSockAddr "10.54.25.26/ 931024 (rtcp: 1025)"; egressRFactorOutbound ingressMediaStream1RemoteIpSockAddr "10.34.13.243/ 6000 (rtcp: 6001)"; egressMediaStream1LocalIpSockAddr "10.54.27.26/ 1024 (rtcp: 1025)"; egressMediaStream1RemoteIpSockAddr "10.34.13.252/ 6000 93(rtcp: 6001)"; mediaStream1LabelingressMediaStream1Security "rtp-disabled rtcp-disabled"; egressMediaStream1Security audio"rtp-disabled rtcp-disabled"; mediaStream1CodecingressMediaStream1Bandwidth 127; egressMediaStream1Bandwidth 127;

To view call media status:
Code Block
language none
> show status global callMediaStatus G711; callMediaStatus 786432 { ingressMediaStream1PacketsSent mediaStreamsInCall 518; ingressMediaStream1PacketsReceived 518audio; ingressMediaStream1OctetsSentingressMacHeader 82880; ingressMediaStream1OctetsReceived 8304864-0-F1-FD-B3-7F; ingressMediaStream1RtcpPacketsSentegressMacHeader 2; ingressMediaStream1RtcpPacketsReceived 2; ingressMediaStream1PacketsLost 64-0-F1-FD-B3-7F; ingressBearerType 0; ingressMediaStream1PacketsDiscarded 0; ingressMediaStream1PacketLatency voice; egressBearerType 0; ingressMediaStream1InterarrivalJitter 0; ingressMediaStream1StunDtlsPacketsReceived 0; ingressMediaStream1StunDtlsPacketsDiscarded 0voice; ingressMediaStream1SrtpAuthFailureingressCfgAudioType 0; ingressMediaStream1SrtpReplayFailure 0G711; egressCfgAudioType egressMediaStream1PacketsSent 518; egressMediaStream1PacketsReceived G711; ingressActAudioType 518; egressMediaStream1OctetsSent 82880na; egressMediaStream1OctetsReceivedegressActAudioType 83056; egressMediaStream1RtcpPacketsSent 2na; egressMediaStream1RtcpPacketsReceived ingressRemPacketsLost 2; egressMediaStream1PacketsLost 0; egressMediaStream1PacketsDiscardedingressRFactorInbound 0; egressMediaStream1PacketLatency 093; egressMediaStream1InterarrivalJitteringressRFactorOutbound 0; egressMediaStream1StunDtlsPacketsReceived 0; egressMediaStream1StunDtlsPacketsDiscarded 093; egressMediaStream1SrtpAuthFailureegressRemPacketsLost 0; egressMediaStream1SrtpReplayFailure 0; }

To view call count interval statistics:
Code Block
language none
> show table global callCountIntervalStatistics egressRFactorInbound INTERVAL 93; CALL NUMBER NAMEegressRFactorOutbound VALID TIME COUNT -------------------------------------- 2 entry true 93; 1548 mediaStream1Label 0 3 entry true 2448 0 4 entry trueaudio; mediaStream1Codec 3348 0 5 entry true 4248 0
To view the status of IP trunk groups in this zone:
G711; ingressMediaStream1PacketsSent 518; ingressMediaStream1PacketsReceived 518; ingressMediaStream1OctetsSent 82880; ingressMediaStream1OctetsReceived 83048; ingressMediaStream1RtcpPacketsSent 2; ingressMediaStream1RtcpPacketsReceived 2; ingressMediaStream1PacketsLost 0; ingressMediaStream1PacketsDiscarded 0; ingressMediaStream1PacketLatency 0; ingressMediaStream1InterarrivalJitter 0; ingressMediaStream1StunDtlsPacketsReceived 0; ingressMediaStream1StunDtlsPacketsDiscarded 0; ingressMediaStream1SrtpAuthFailure 0; ingressMediaStream1SrtpReplayFailure 0; egressMediaStream1PacketsSent 518; egressMediaStream1PacketsReceived 518; egressMediaStream1OctetsSent 82880; egressMediaStream1OctetsReceived 83056; egressMediaStream1RtcpPacketsSent 2; egressMediaStream1RtcpPacketsReceived 2; egressMediaStream1PacketsLost 0; egressMediaStream1PacketsDiscarded 0; egressMediaStream1PacketLatency 0; egressMediaStream1InterarrivalJitter 0; egressMediaStream1StunDtlsPacketsReceived 0; egressMediaStream1StunDtlsPacketsDiscarded 0; egressMediaStream1SrtpAuthFailure 0; egressMediaStream1SrtpReplayFailure 0; }

To view call count interval statistics:
Code Block
language none
> show table global callCountIntervalStatistics INTERVAL CALL NUMBER NAME VALID TIME COUNT -------------------------------------- 2 entry true 1548 0 3 entry true 2448 0 4 entry true 3348 0 5 entry true 4248 0

To view the status of IP trunk groups in this zone:
Code Block
language none
> show table global globalTrunkGroupStatus TOTAL TOTAL TOTAL CALLS INBOUND OUTBOUND TOTAL PRIORITY OUTBOUND BW BW BW CALLS INBOUND CALLS CALLS CALLS CALL CALLS CURRENT BW INBOUND OU NAME STATE AVAILABLE RESERVED USAGE USAGE CONFIGURED USAGE RESERVED LIMIT AVAILABLE USAGE US -------------------------------------------------------------------------------------------------------------------------------------------- GWGW inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC1 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC2 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC3 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC4 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC5 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC6 inService -1 0 0 0 -1 0 0 -1 -1 0 0

To display the table for serviceAuthorisedCurStats:
Code Block
language none
> show table global serviceAuthorisedCurStats ENHANCED LICENSE ENCRYPT SRTP VIDEO AMRNB LEG AMRWB LEG EVRC LEG NICE REC MRF SESSIONS NAME MODE AUTHORISATION AUTHORISATION AUTHORISATION AUTHORISATION AUTHORISATION AUTHORISATION AUTHORISATION AUTHORISATION ---------------------------------------------------------------------------------------------------------------------------------------- entry legacy 0
Code Block
language none
> show table global globalTrunkGroupStatus 0 0 0 TOTAL 0 0 0 TOTAL 0

To display the table for serviceAuthorisedIntStats:
Code Block
language none
> show table global serviceAuthorisedIntStats TOTAL CALLS INBOUND OUTBOUND TOTAL PRIORITY OUTBOUND BW BW BWENHANCED INTERVAL LICENSE ENCRYPT SRTP CALLS INBOUND CALLSVIDEO CALLS CALLS AMRNB LEG CALL CALLS CURRENT BW INBOUND OU NAME AMRWB LEG EVRC LEG NICE REC STATE MRF SESSIONS NUMBER AVAILABLE NAME RESERVED USAGEVALID USAGE TIME CONFIGUREDMODE USAGE AUTHORISATION RESERVEDAUTHORISATION LIMITAUTHORISATION AUTHORISATION AVAILABLEAUTHORISATION USAGEAUTHORISATION AUTHORISATION USAUTHORISATION -------------------------------------------------------------------------------------------------------------------------------------------- GWGW inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC1 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC2 inService -1 0 0 0 -1 0 0 -1 -1 0 0 SBC3 --------------------------- 673 entry true 605740 network 0 inService -1 0 0 0 0 0 -1 0 0 0 -1 -1 0 0 0 SBC4674 entry true 606640 network 0 inService -1 0 0 0 0 0 -1 0 0 0 -1 -1 0 0 0 SBC5675 entry true 607540 network 0 inService -1 0 0 0 0 0 -1 0 0 0 -1 -1 0 0 0 SBC6676 entry true 608440 network 0 inService -1 0 0 0 0 0 -1 0 0 0 -1 -1 0 0 0

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 23

New Version Current

Key

Command Syntax

Common Statistics to 'show status / table global' Commands

CAC Statistics

Call Detail Status

Call Media Status Statistics

Service Authorization Statistics

Command Examples

Statistics for 'show table global' Only Command

Command Examples