This page provides the settings and cable pinouts for the console of an
device.
Console Settings
The RJ-45 port is configured as an RS232 serial console output port with the following settings:
- Baud rate: 115200 .baud
- Data bits: 8.
- Stop bits: 1.
- Parity: None.
- Flow control: None.
Pin Assignments
Here are the pin assignments for the RJ-45 console.
Pin Assignments for the Console Cable
Pinout for the Console Cable
| Signal | DB9 Pin | RJ45 Pin | Signal |
|---|
| - | 1 - NC | NC | - |
| RXD | 2 | 3 | TXD |
| TXD | 3 | 6 | RXD |
| - | 4 - NC | NC | - |
| GND | 5 | 4 | GND |
| - | 6 - NC | NC | - |
| - | 7 - NC | NC | - |
| - | 8 - NC | NC | - |
| - | 9 - NC | - | - |
Legend
NC: Not Connected
TXD: Transmit Data
RXD: Receive Data
GND: Ground