| Excerpt |
|---|
Use this object to configure H323 Signaling Port for this zone. | Note |
|---|
Each signaling port within an Address Context must use a unique IP address. |
|
...
...
...
| _IP_IGs_ServedBySeperateProcessors |
|---|
|
|
...
| _IP_IGs_ServedBySeperateProcessors |
|---|
|
To View H323Sig PortOn the SBC main screen, |
...
navigate to: - All > Address Context > Zone > H323Sig Port
- Configuration > System Provisioning > Category: Base Provisioning > Signaling Ports > H323Sig Port
The H323Sig Port window is displayed. |
...
 Image Modified
|
...
You can check the H323Sig Port for each Address Context |
...
...
...
Address Contexts and Zones |
...
. Use the drop-down box to select the desired Address Context and Zone. To Edit H323Sig PortTo edit any of the H323Sig Ports in the list, click the radio button next to the specific H323Sig Port name. The Edit |
...
Selected H323Sig Port window is displayed |
...
Figure 2: H323Sig Port Edit Window
Image Removed
Make the required changes and |
...
click Save. Image Added To Create H323Sig PortTo create a new H323Sig Port, |
...
click New H323Sig Port tab on |
...
the H323Sig Port List panel. |
...
Figure 3: H323Sig Port Fields
Image Removed
...
New H323Sig Port window is displayed. Image Added |
...
Image Removed
The following fields are displayed:
Table 1: H 323 Sig Port
...
Parameter | Description |
|---|
Index | Specify the index value. |
|
...
IP Interface Group Name | The name of the IP interface group used by this Signaling Port. |
|
...
H225IP Address | The 32-bit IP address used for H225 signaling. Specified in dotted decimal form (for example 128.127.50.224). Default is 0.0.0.0. |
|
...
Port Number | The logical port number of the UDP port to use for this connection. This defines the H.225 well known port. Must be 1-5000, default is 1720. |
|
...
H245IP Address | The 32-bit IP address used for H245 signaling. Specified in dotted decimal form (for example 128.127.50.224). Default is 0.0.0.0. This must equal ipaddress1 in the current implementation. | Mode | The operational state of the H323 signaling service: |
|
...
- In Service—the signaling port listens for incoming H323 signal link connection requests.
|
|
...
- Out Of Service—the signaling port is not available for incoming H323 signal link connection requests and thus cannot be used to create a new gateway signal links to other H323 gateways.
| State | The administrative state of this H323 signaling port: |
|
...
...
...
| Action | The method by which active calls using this H323 signaling service are processed when MODE goes to out of service: |
|
...
- Dryup—all calls are allowed to complete until TIMEOUT expires.
|
|
...
- Force—all calls are dropped immediately.
|
|
...
Dry Up Timeout | The time (in minutes) to wait for active calls to finish in order to place the H323 signaling service in out of service MODE. Must be 0-1440, default is 0. |
|
...
DSCP Value | Differentiated Services Code Point value (0-63). |
To Delete H323Sig PortTo delete any of the |
...
created H323Sig Port, click the radio button next to the |
...
...
...
at the end of the highlighted row. A delete confirmation message appears seeking your decision. |
...
Click Yes to remove the specific H323Sig Port from the list.
|