Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Excerpt Include
_Signaling Packet Capture Tool tip
_Signaling Packet Capture Tool tip
nopaneltrue


Panel

In this section:

Children Display


Info
iconfalse

Related article:


Excerpt

Use the Signaling Packet Capture window to configure the Signaling Packet Capture utility. Signaling Packet Capture data is stored in a ".PKT" file in the location: /var/log/sonus/evlog/evlog

Info
titleNote

This utility is intended for use in debugging and should only be used with a limited number of calls at any one time. 

On the SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.

The Signaling Packet Capture window is displayed.

Figure 1: Troubleshooting - Call Trace - Signaling Packet Capture


Use the following table to edit the fields and then click Save.

Table 1: Signaling Packet Capture Parameters

ParameterLength/RangeDescription
Signaling Packet Capture Timer0-360

The signaling packet capture timer, in minutes, for both call and error trace filters.

The default value is 180.

State

N/A

Use this flag to enable/disable the signaling packet capture timer.

  • Disable (default)
  • Enable


Info
titleNote

In the absence of any device or filter configuration, the Signaling Packet Capture feature only captures SIP/H.323 signaling for calls which are traced by Call Trace Filters.

Before making any change in the filter or applying new filter, change to Disable state. Once the filter is changed/applied, enable it.