Page History
...
- Ribbon SBC SWe Edge
- Ribbon SBC SWe Edge license
- This interop requires the acquisition and application of SIP sessions, as documented at Working with Licenses
- Public IP addresses
- TLS certificates for SBC SWe Edge
- For more details, please visit Working with Certificates
- Google Workspace and Domain
- Google Voice Premier license for the users
- For more details, contact Google support
...
To deploy Ribbon SBC SWe Edge instance, refer to Installing SBC SWe Edge.
Ribbon SBC SWe Edge Configuration
...
For more details on Licenses, refer to Working with Licenses.refer to SWe Edge License
SBC Certificate
From the Settings tab, navigate to Security > SBC Certificates > Generate SBC Edge Certificates.
...
| Warning | ||
|---|---|---|
| ||
Most Certificate Vendors sign the SBC Edge certificate with an intermediate certificate authority. There is at least one, but there could be several intermediate CAs in the certificate chain. When importing the Trusted Root CA Certificates, import the root CA certificate and all Intermediate CA certificates. Failure to import all certificates in the chain causes the import of the SBC Edge certificate to fail. Please refer to Unable To Get Local Issuer Certificate for more information. |
Networking Interfaces
...
From the Settings tab, navigate to Media > Media Profiles. From the Create Media Profile drop-down, select Voice Codec Profile.
The codecs G711A and G711U are configured on the SBC SWe Edge by default. Configure OPUS and G722 by following the steps provided below:
...
Call Routing allows calls to be carried between Signaling Groups, thus allowing calls to be carried between ports and between protocols (like ISDN to SIP). Routes are defined by Call Routing Tables, which allow flexible configuration of how calls are to be carried and how they are translated. These tables are the central connection points of the system, linking Transformation Tables, Message Translations, Cause Code Reroute Tables, Media Lists and the Signaling Groups.
...
Signaling groups allow telephony channels to be grouped together for the purposes of routing and shared configuration. They are the entity to which calls are routed, as well as the location from which Call Routes are selected. They are also the location from which Tone Tables and Action Sets are selected.
From the Settings tab, navigate to Signaling Groups. Click Add SIP SG.
...
TLS Profiles are used by SIP Signaling Groups when the TLS transport type is selected for incoming and outgoing SIP trunks (Listen Ports), and in SIP Server Tables when TLS is selected as the Server Host protocol.
...
| Info | ||
|---|---|---|
| ||
Ignore step 5 if you are configuring SBC 1K. |
| Warning | ||
|---|---|---|
| ||
Ensure the "TLS Listen Port" towards the Google Voice Server is always set to 5061 in order to accept the incoming messages from Google Voice Server using an already established TLS connection with the Ribbon SBC. |
Call Routing Table Entry
Call Routing entries must to be created after creating SIP Signaling Groups as Destination SGs need to be attached to these entries.
...
Overview
Content Tools