Page History
...
- In the WebUI, click the Tasks tab.
- In the left navigation panel, go to SBC Easy Setup > Easy Config Wizard.
From the Application drop down list, select FXO.
Configure per the field definitions below and click Next.
Caption 0 Figure 1 Select FXO Caption 0 Figure 1
Configure Scenario Parameters - Field DefinitionsField Description Application Configuration template used: FXO. Scenario Description Name to describe the setup. Telephone Country Country in which the FXO endpoint is setup. Provider Type Hardcoded to FXO.
Step 2: Configure FXO for Endpoint
...
- Configure the FXO information.
- Click Next.
...
0 | Figure |
---|---|
1 | Step 2 Example Screen |
The fields below are displayed if you select FXO from the Application drop down list in Step 1.
...
Configure FXO Parameters
Field | Description |
---|---|
Calibrate FXO Ports | Enables/disables FXO Port calibration. FXO Port Calibration function determines the optimum impedance and the local loop type settings and configures each selected port accordingly, which eliminates impedance mismatching. Impedance mismatching results in audible echos on the line and reduced call quality. Correctly matching the line impedance reduces or eliminates the echo. A number of factors influence the line impedance: line types that vary from country to country, line types that vary between geographic regions, and the distance between the node and the central office. Options: Yes (FXO port calibration is executed) or No (FXO port calibration is not executed). |
Caller ID Type | Specifies the Caller ID Type used with the signaling group. Not all countries are standardized on which Caller ID Type they use. This list contains suggested types for certain countries, and some countries use multiple types. If the Caller ID Types listed here are not used for your country, you may need to contact your local service provider for more information. Caller ID by Country: Disabled. Caller ID type is not used. FSK. Mexico, USA, Canada, Australia, New Zealand Singapore, Hong Kong, and some parts of China. FSK, No Ring. UK, Taiwan, and some parts of China. DTMF. Brazil, Belgium, Denmark, Finland, Iceland, India, Netherlands, Saudi Arabia, Sweden, Uruguay and some parts of Taiwan. DTMF, No Ring. Taiwan and some parts of China. DTMF, Reverse Battery. Taiwan and China. ETSI, Reverse Battery. Taiwan. NTT, Japan CID. NTT and Japan. |
Caller ID Start Deliminator | Available only when the Caller ID Type is DTMF, DTMF NO Ring, or DTMF Reverse Battery. |
Caller ID End Deliminator | Available only when the Caller ID Type is DTMF, DTMF NO Ring, or DTMF Reverse Battery. |
Provider Hunt Group | When enabled, all ports in the signaling group are set to the Hunt Group phone number entered in the Phone Number field. Valid options: Enabled or Disabled. |
FXO Ports | The physical FXO port number to which the FXO line is physically connected. Configure FXO port entries using the following command buttons: Up (move a port up in the list), Down (move a port down in the list), Add/Edit (adds or changes a port), and Remove (deletes a port). For example, click Add/Edit to add a port. Click the check box for the desired FXO port, and click OK. |
Phone Number | The phone number associated with the FXO ports specified. This field is available only when Provider Hunt Group is Enabled. |
Step 3: Summary
Easy Configuration Step 3 includes a summary of the information configured in Step 1 and Step 2.
...
See below for an example:
...