Page History
| Add_workflow_for_techpubs |
|---|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
| Panel | ||||
|---|---|---|---|---|
In this section:
|
...
- In the WebUI, click the Settings tab.
In the left navigation page, go to System > Node-Level Settings.
Panel borderStyle none Caption 0 Figure 1 Node-Level Settings - SBC 1000/2000 
Panel Caption 0 Figure 1 Node-Level Settings - SBC SWe Lite 
Node-Level - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the IPv4 or IPv6 address of the Primary DNS server. If the Node-Level Network Settings drop down box is set to Dynamic, this field is configured automatically. Field is displayed when Use Primary DNS is set to Yes. |
Primary Source
| Panel | ||||
|---|---|---|---|---|
| ||||
Field lists all Logical Interfaces for the Primary DNS. The IP address selected is used as the source IP for the corresponding DNS queries. Definitions for available options include: <IP Address>: Source IP is the IP address associated with the source IP for the corresponding DNS queries. Auto: Source IP is the IP address of the interface which is used for the DNS query. |
Use Secondary DNS
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies whether or not a secondary DNS server is used. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the IPv4 or IPv6 address of the Secondary DNS server. If Node-Level Network Settings is set to Dynamic, this field is configured automatically. Field is displayed when Use Secondary DNS is set to Yes. |
Secondary Source
| Panel | ||||
|---|---|---|---|---|
| ||||
Field lists all Logical Interfaces for the Secondary DNS. The IP address selected is used as the source IP for the corresponding DNS queries. <IP Address>: Source IP is the IP address associated with the source IP for the corresponding DNS queries. Auto: Source IP is the IP address of the interface which is used for the DNS query. |
Enable DNS
...
Service
| Panel | ||||
|---|---|---|---|---|
| ||||
Note: This field not applicable to the SBC SWe Lite. When enabled, the SBC accepts DNS requests, and either serves them locally or forwards them as necessary. Valid entry: Yes (DNS request is forwarded or served locally as necessary) or No (DNS requests are not handled by the SBC). Default entry: No. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Note: This field not applicable to the SBC SWe Lite. Determines whether or not the SBC behaves as a DHCP server (grants leases to other hosts on the network). |
...
EdgeView - Field Definitions
...
| title | Note |
|---|
...
| Spacevars | ||
|---|---|---|
|
...
EdgeView
| Panel | ||||
|---|---|---|---|---|
| ||||
Configure this field to enable or disable the EdgeView SCC.
|
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure this field with the IP address or FQDN of the EdgeView.
|
EdgeView Management ID
| Panel | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||
Configure this field with the Management ID of the EdgeView.Note: for the EdgeView. For information about retrieving the EdgeView Management ID, refer to Obtaining and Installing an SBC SWe Lite Production License.
|
EdgeView Connection
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
The status of the SBC’s connection to the EdgeView. This status may be one of the following:
|
EdgeView Tunnel Status
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
The status of the HTTPS tunnel from the EdgeView to the SBC. This status may be one of the following:
|
EdgeView C2E License
| Panel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| |||||||||
The status of the EdgeView Cloud to Edge Licensing on the SBC. This status may be one of the following:
|
Country Level Information
...
This section applies to only the
| ||||
| Panel | ||||
|---|---|---|---|---|
| ||||
Configure this field with the country code in which the |
Configuring Node Level Options
...
Overview
Content Tools