Use this object to specify the packet outage detection parameters for this SIP trunk group.
...
| Info |
|---|
|
As a best practice, always use UPPERCASE for trunk group names. |
Command Syntax
| Code Block |
|---|
|
% set addressContext <name> zone <name> sipTrunkGroup <name> packetOutage
bandwidthLimitReduction <0-100>
detectionInterval <5-1440>
detectionState <disabled | enabled>
minimumCalls <0-65535>
minimumDuration <0-65535>
|
Command Parameters
| Caption |
|---|
| 0 | Table |
|---|
| 1 | SIP Trunk Group Packet Outage Parameters |
|---|
|
| Parameter | Length/Range | Description |
|---|
bandwidthLimitReduction | 0-100 | Amount to reduce the bandwidth limit (as a percentage of the configured limit) when a packet outage is detected. (default = 50). | detectionInterval | 5-1440 | Size of the packet outage detection interval in minutes. (default = 15).
| detectionState | N/A | Use to enable automatic bandwidth reduction when a packet outage is detected. disabled (default)enabled
| minimumCalls | 0-65535 | Number of calls with outages required within the current interval to declare a packet outage event. (default = 1000). | minimumDuration | 0-65535 | The minimum outage (in milliseconds) on a call for that call to be counted as part of the packet outage detection algorithm. (default = 6000). |
|