Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

 

An ISO

Noprint

 

 

The re-installation of ISO is required under the following circumstances:

  • When incorrect The management IP address is configuredincorrect
  • Customers A customer who already evaluated the a special or Engineering engineering release and want wishes to update upgrade to a new GA release

To re-install reinstall the SWe ISO:

  1. Right-click the VM instance name and click Edit Settings.

    Caption
    0Figure
    1Edit Settings

    Include Page
    Screenshot_disclaimer
    Screenshot_disclaimer

     

  2. Click Options tab.

    1. Click Boot Options.

    2. Check Choose the Force BIOS Setup option and click OK.

      Caption
      0Figure
      1Force BIOS Setup

  3. Click Hardware tab.
    1. Click CD/DVD drive 1
    2. Click Browse... Select the ISO image software file. For example, the ISO file name is sbc-V05.01.00A503-connexip-os_03.01.00-amd64.iso. Click OK to close the Browse Datastores window.

    3. Check Choose the Connect at power on option and click OK.

      Caption
      0Figure
      1Hardware TabConnect at Power On

  4. Right-click the VM instance and click Power > Power On. The BIOS setup window appears.

  5. Use right-arrow key to navigate to the Boot tab.

  6. Use down-arrow key to select CD-ROM Drive option.

    Caption
    0Figure
    1Boot Option - CD-ROM Drive

  7. Press + or -  key to bring the CD-ROM Drive option to the top of the boot order.

    Caption
    0Figure
    1Move CD-ROM First OptionDrive to Top

  8. Press F10 to Save and Exit. A setup confirmation appears.

  9. Click Yes to save and exit.

    Caption
    0Figure
    1F10 Setup Confirmation

  10. The Connex IP OS Window appears. Select Install and press Enter.

    Caption
    0Figure
    1ISO Install Screen

    Include Page
    Screenshot_disclaimer
    Screenshot_disclaimer

  11. After the setup is run successfully, right-click the VM instance name and click Edit Settings.
  12. Click Hardware tab.

    1. Click CD/DVD drive 1.

    2. Uncheck Deselect the Connect at power on option and click OK.

      Caption
      0Figure
      1Uncheck Deselect Connect Power On

  13. Click Options tab.

    1. Click Boot Options.

    2. Check Choose the Force BIOS Setup option and click OK.

      Caption
      0Figure
      1Force BIOS Setup

  14. Right-click the VM instance name and click Power > Power On to display the BIOS setup window.
    1. Use the right-arrow key to navigate to Boot tab
    2. Use down-arrow key to select CD-ROM Drive option.
    3. Press + or - key to change the boot order for CD-ROM Drive back to its original.

    4. Press F10 to Save and exit and to power back your VM.

      Caption
      0Figure
      1Changing back to original order

...