Parameter | Length/Range | Default | Description |
---|
ipPolicingAlarmProfile
| 1-23 | N/A | IP Policing Alarm Profile name. Two default profiles are available as starting point in creating custom profiles: defaultSystemMajor defaultSystemMinor
|
aclClearDuration
| 0-65535 | 3 | Duration (in seconds) that the access control list policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
aclClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the access control list policer discard rate (in pkts/sec) which may clear an alarm. |
aclSetDuration
| 0-65535 | 3 | Duration (in seconds) that the access control list policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
aclSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the access control list policer discard rate (in pkts/sec) which may set an alarm. |
aggregateClearDuration
| 0-65535 | 3 | Duration (in seconds) that the aggregate policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
aggregateClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the aggregate policer discard rate (in pkts/sec) which may clear an alarm. |
aggregateSetDuration
| 0-65535 | 3 | Duration (in seconds) that the aggregate policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
aggregateSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the aggregate policer discard rate (in pkts/sec) which may set an alarm. |
arpClearDuration
| 0-65535 | 3 | Duration (in seconds) that the ARP policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
arpClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the ARP policer discard rate (in pkts/sec) which may clear an alarm. |
arpSetDuration
| 0-65535 | 3 | Duration (in seconds) that the ARP policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
arpSetThreshold
| 0-2147483647 | 100 | Duration (in seconds) that the bad Ethernet IP header policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
badEthernetIpHeaderClearDuration
| 0-65535 | 3 | Duration (in seconds) that the bad Ethernet IP header policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
badEthernetIpHeaderClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the bad Ethernet IP header policer discard rate (in pkts/sec) which may clear an alarm. |
badEthernetIpHeaderSetDuration
| 0-65535 | 3 | Duration (in seconds) that the bad Ethernet IP header policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
badEthernetIpHeaderSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the bad Ethernet IP header policer discard rate (in pkts/sec) which may set an alarm. |
discardRuleClearDuration
| 0-65535 | 3 | Duration (in seconds) that the discard rule discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
discardRuleClearThreshold
| 0-2147483647 | 10 | Specifies the threshold for the discard rule discard rate (in pkts/sec) which may clear an alarm. |
discardRuleSetDuration
| 0-65535 | 3 | Duration (in seconds) that the discard rule discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
discardRuleSetThreshold
| 0-2147483647 | 20 | Specifies the threshold for the discard rule discard rate (in pkts/sec) which may set an alarm. |
index
| N/A | 1 | This required parameter is a unique identifier of IP Policing Alarm Profile. |
ipSecDecryptClearDuration
| 0-65535 | 3 | Duration (in seconds) that the IPSEC decrypt policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
ipSecDecryptClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the IPSEC decrypt policer discard rate (in pkts/sec) which may clear an alarm. |
ipSecDecryptSetDuration
| 0-65535 | 3 | Duration (in seconds) that the IPSEC decrypt policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
ipSecDecryptSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the IPSEC decrypt policer discard rate (in pkts/sec) which may set an alarm. |
mediaClearDuration
| 0-65535 | 3 | Duration (in seconds) that the media policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
mediaClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the media policer discard rate (in pkts/sec) which may clear an alarm. |
mediaSetDuration
| 0-65535 | 3 | Duration (in seconds) that the media policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
mediaSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the media policer discard rate (in pkts/sec) which may set an alarm. |
rogueMediaClearDuration
| 0-65535 | 3 | Duration (in seconds) that the rogue media policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
rogueMediaClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the rogue media policer discard rate (in pkts/sec) which may clear an alarm. |
rogueMediaSetDuration
| 0-65535 | 3 | Duration (in seconds) that the rogue media policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
rogueMediaSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the rogue media policer discard rate (in pkts/sec) which may set an alarm. |
srtpDecryptClearDuration
| N/A | N/A | The duration (in seconds) that the IPSEC decrypt policer discard rate must be at or below its clear threshold before an alarm is cleared. |
srtpDecryptClearThreshold
| N/A | N/A | The threshold for the IPSEC decrypt policer discard rate which may clear an alarm. |
srtpDecryptSetDuration
| N/A | N/A | The duration (in seconds) that the IPSEC decrypt policer discard rate must be at or above its set threshold before an alarm is set. |
srtpDecryptSetThreshold
| N/A | N/A | The threshold for the IPSEC decrypt policer discard rate which may set an alarm. |
state
| N/A | enabled | Administrative state of the profile. |
uFlowClearDuration
| 0-65535 | 3 | Duration (in seconds) that the micro flow policer discard rate (in pkts/sec) must be at or below its clear threshold before an alarm is cleared. |
uFlowClearThreshold
| 0-2147483647 | 20 | Specifies the threshold for the micro flow policer discard rate (in pkts/sec) which may clear an alarm. |
uFlowSetDuration
| 0-65535 | 3 | Duration (in seconds) that the micro flow policer discard rate (in pkts/sec) must be at or above its set threshold before an alarm is set. |
uFlowSetThreshold
| 0-2147483647 | 100 | Specifies the threshold for the micro flow policer discard rate (in pkts/sec) which may set an alarm. |