| Panel |
|---|
| borderColor | green |
|---|
| bgColor | transparent |
|---|
| borderWidth | 2 |
|---|
|
Additional sections: |
This object contains signaling packet capture devices and admin state. The Signaling Use the Signaling Packet Capture window to configure the Signaling Packet Capture utility. Signaling Packet Capture data is stored in a ".PKT" file under in the location: /var/log/sonus/evlog/evlog location.
| Note |
|---|
In the absence of any device or filter configuration, The Signaling Packet Capture will capture only the SIP/H323 signaling for calls which are traced by Call Trace Filters. |
To View and Edit Signaling Packet Capture
| Info |
|---|
|
This utility is intended for use in debugging and should only be used with a limited number of calls at any one time. |
On the On SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Troubleshooting - Call Trace - Signaling Packet Capture |
|---|
|
|
The following fields are displayed:Use the following table to edit the fields and then click Save.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Signaling Packet Capture Parameters |
|---|
|
| Parameter | Description |
|---|
| Signaling Packet Capture Timer | Specifies the The signaling packet capture timer in seconds. It describes the call trace timer , in minutes, for both Calls and Error Trace Filterscall and error trace filters. The value ranges from 0 to 360 seconds and the minutes, with a default value is of 180 seconds. | | State | Use this flag to enable/disable Signaling Packet Captures. It also specifies the administrative state of signaling packet capture:signaling packet captures by enabling/disabling the timer. - Disable
disabled (default) enabled
|
|
...
| Info |
|---|
|
In the absence of any device or filter configuration, the Signaling Packet Capture feature only captures SIP/H.323 signaling for calls which are traced by Call Trace Filters. Before making any change in the filter or applying new filter, change to Disable state. Once the filter is changed/applied, enable it. |
Additional topics:
| Div |
|---|
| style | padding-left:1%; |
|---|
| id | indent |
|---|
|
|