Page History
| Noprint | |||||||||
|---|---|---|---|---|---|---|---|---|---|
|
The BMC web application is available via TLS-secured (https) access either directly through port 443 or indirectly through port 80 to 443. ACL rules are not applicable to prevent unsecured (http) access. A sample X.509 certificate which is a copy of the BMC, and EMA certificates are shipped along with the SBC shipment. The size of this certificate is 2,048 bits.
...
Certificate with RSA keys up to 4,096 bits are supported. However,
...
| Spacevars | ||
|---|---|---|
|
| Info | ||
|---|---|---|
| ||
The BMC uses a separate certificate store that is independent from the SBC application certificate store. The SBC application certificate store is also used for SIP over TLS and for accessing EMA over HTTPS. Load private keys and certificates (both server and CA certificates) separately for the BMC and for the SBC application. For more information on managing certificates, refer to Managing Certificates. |
Enter the following URL in the browser to access the SBC BMC GUI:
| Code Block | ||
|---|---|---|
| ||
https://<BMC_IP_Address> |
where BMC IP address is the IP address of the BMC GUI.
The BMC also provides the interface which uploads the self-signed certificate to replace the sample X.509 certificates.
| Info | |
|---|---|
|
...
| |
The |
...
|
...
|
| Include Page | ||||
|---|---|---|---|---|
|
Use the following procedure to upload self signed certificates using BMC:
...
Log on to the
...
BMC using the IP address configured in the previous section.Spacevars 0 product
...
The
BMC main screen appears.Spacevars 0 product
Click Configuration tab. The Configuration screen is displayed.
Caption 0 Figure 1
...
BMC Main Screen
...
Click Configuration > SSL. The SSL
...
Certification Configuration screen
...
is displayed.
Caption 0 Figure 1 SSL Upload Screen Click
...
Browse from the
...
Upload SSL
...
tab, and then from the Open dialog, browse to and select the BMC certificate.
Info title Note Perform the same to select the SSL key.
Info title Note If you require the BMC to send a certificate chain of SSL certificates instead of its own server certificate only, you must import the intermediate CA and/or root CA certificates together with the SBC server certificate in one file. The file must contain all certificates in .pem format.
Caption 0 Figure 1 Selecting BMC Certificate - Click Open. The selected SSL Certificate and the Privacy Key appears in the tab.
Click Upload to upload the new BMC certificate and the Privacy Key (if any).
Caption 0 Figure 1 Uploading SSL Certificates Follow steps 4 through 6 to upload the Default Privacy Key.
...
A pop up message appears stating that the HTTPs Service need to restart and seeking your permission to proceed.
Caption 0 Figure 1 Successful Upload Message
...
- Click OK to restart the BMC web server to use the new SSL Certificate.
...
| Noprint | |
|---|---|
|
...
|
| Pagebreak |
|---|
Overview
Content Tools