Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Noprint
Panel
borderColorgreen
bgColortransparent
borderWidth2

Back to Table of Contents

Back to CLI Configure Mode

Back to Operations and Maintenance - CLI

...

Panel

In this section:

Table of Contents
maxLevel4
minLevel2

...

Info

...

icon

...

false

Related articles:

...

...

...

 

The Alarms object allows you to configure alarm parameters. The alarms are individually configurable. 

When viewing alarms from the CLI, the alarm

...

timestamp is Greenwich Mean Time (GMT) regardless of the time zone set on the system.

Note
Link detection failure alarms are generated by Link Verification Manager (LVM) and are raised only when LVM is configured. NRS generated alarms are raised regardless of whether LVM is configured.  
Note

Most alarms do not require any user configuration and hence are not included in this section. See SBC Core Alarms

...

Guide for a complete listing of alarms, events and/or trap details.

Command Syntax

set/show/delete oam alarms

Code Block

...

titleset/show/delete oam alarms syntax
% set oam alarms 
	ethernetCrcErrAlarm
		clearThreshold <0-65535>
		setThreshold <0-2147483647>
	ipPolicingAlarmAdmin 
		majorAlarmMode <inService | outOfService>
		majorAlarmProfileName <profile name>
		minorAlarmMode <inService | outOfService>
		minorAlarmProfileName <profile name>
	mediaSrtpErrAlarm
		clearThreshold <0-65535>
		setThreshold <0-2147483647>
  
% show oam alarms 
	ethernetCrcErrAlarm
	ipPolicingAlarmAdmin
	mediaSrtpErrAlarm
  
% delete oam alarms ipPolicingAlarmAdmin majorAlarmMode
% delete oam

...

alarms

...

ipPolicingAlarmAdmin minorAlarmMode

...

% delete oam alarms

...

ethernetCrcErrAlarm

...

% delete oam alarms mediaSrtpErrAlarm

request alarms

Code Block
titlerequest alarms syntax
% request alarms clear
   current
     alarmId <alarm_Id>
     deleteMatchingAlarms <no | yes>

...

history  

request oam alarms

Code Block
titlerequest oam alarms syntax
% request oam alarms resetIpPolicingAlarmStatus

...

Command Parameters
Set Command Parameters
 Caption
0Table
1 OAM Alarms Parameters
 
Parameter
...
Length/Range
Description
ethernetCrcErrAlarm
...
Use this object to define when to generate/clear an alarm for Ethernet CRC failures.
  • clearThreshold – Threshold value to clear this alarm (range: 0-65535 / default = 100)
  • setThreshold – Threshold value to set this alarm (range: 0-2147483647 / default = 1000)
 Note
A value of "0" disables the alarm.
ipPolicingAlarmAdmin
...
Use this object to configure system policer alarms maintenance modes and profile names.
  • majorAlarmMode –Maintenance/service mode for major alarm notification.
    • inService (default) – Active
...
    • outOfService – Not active
...
  • majorAlarmProfileName <profile name> – Policer alarm profile name for major alarm notification. The default profile name is: defaultSystemMajor.
  • minorAlarmMode – Maintenance/service mode for minor alarm notification.
    • inService (default) – Active
...
    • outOfService – Not active
...
  • minorAlarmProfileName <profile name> – Policer alarm profile name for minor alarm notification. The default profile name is: defaultSystemMinor.
 mediaSrtpErrAlarm
...
 
Use this object to configure Media SRTP Authorization Error alarm thresholds.
  • clearThreshold – Threshold value to clear this alarm (range: 0-65535 / default = 100)
  • setThreshold – Threshold value to set this alarm (range: 0-2147483647 / default = 1000)
 Note
A value of "0" disables the alarm.
Request Command Parameters
 Caption
0
...
Table
1Request Alarms Clear Parameters
ParameterDescription
current
...
N/A
Use this parameter to   clear current/outstanding alarm(s).
  •   alarmId – Unique alarm identifier.
  •   deleteMatchingAlarms– Use this parameter to specify whether or not to delete all alarms matching the alarm type/SNMP trap name.
    • no (default) – Only the alarm <alarmId> is cleared.
    • yes – Alarm <alarmId> is cleared along with all alarms matching the alarm type/SNMP trap name.
history
...
N/A
Use this parameter to clear all alarms from the history buffer.
 Caption
0Table
1 Request OAM Alarms Parameter 
Parameter
...
Length/Range
Description
resetIpPolicingAlarmStatus
...
Resets the statistics in the IP policing alarm status.
Command Examples
This example displays the mode and profile name of major and minor alarms of the ipPolicingAlarmAdmin object:
 Code Block
languagenone
% show oam alarms ipPolicingAlarmAdmin
   minorAlarmMode        outOfService;
   majorAlarmMode        inService;
   minorAlarmProfileName defaultSystemMinor;
   majorAlarmProfileName defaultSystemMajor;
In following example, the user clears two alarms with the same alarm type using the deleteMatchingAlarms parameter:
Alarm details:
 Code Block
languagenone
171    AUTOMATIC  2013-04-10T20:12:42 Local server sbx138.eng.sonusnet.com: NTP peer server IP address 10.1.1.2 is out of service. Reason: NTP server disabled.  SM        Minor
173    AUTOMATIC  2013-04-10T20:12:42 Local server sbx137.eng.sonusnet.com: NTP peer server IP address 10.1.1.2 is out of service. Reason: NTP server disabled.  SM        Minor
CLI command:
 Code Block
languagenone
% request alarms clear current alarmId 171 deleteMatchingAlarms yes
...
 
  
...