Page History

This section explains the prerequisites and the configurations to be done on the

SBC SWe cluster and PSX Manager so that the

SBC cluster has the view of the PSX cluster and the PSX has the view of the

SBC cluster. To configure SBC SWe clusters as gateways in the PSX SWe Manager, refer to "Configuring SBC Cluster ID as Gateway" in the PSX documentation.  

Prerequisites

• EMS instance is up and running
• PSX Master instance

• is up and running

The PSX instances within a cluster must be visible to the instances within the

SBC SWe cluster.  Registering the PSX cluster FQDN in the Remote Policy Server, instead of the IP address

, allows the

SBC SWe to have a view of the PSX instances within the cluster.

 When a new instance is created, it will query the PSX using the FQDN.

Access the SBC Configuration Manager

Disable the PSX Local Server

1. Navigate: 

1. All > System > Policy Server > Local Server. Select the PSX_LOCAL_SERVER.

2. Change the State to Disabled and Mode

1.  to Out of Service.

2. Click Save.
   

   Caption
   0 Figure 1 Local Server
   Image Modified

Add a Remote Policy Server with the PSX Cluster FQDN

1. Navigate through All > System > Policy Server > Remote

1. Server. The following screen appears:

   Caption
   0 Figure 1 Remote Policy Server
   Image Modified

2. Click New Remote Server and add the required values, for example:

   1. Enter the Name as

1. 1. the cluster name (PSX_15).

   2. Enter

1. 1. the FQDN of the PSX Cluster, for example "psx2.sonusnet.com".

   2. Check the radio button for Enabled.

   3. Change the Mode to Standby.

      Caption
      0 Figure 1 Remote Policy Server Values
      Image Modified

   4. Click Save.

      Caption
      0 Figure 1 Remote Policy Server List
      Image Modified

1. 2. Create another Remoter Server with the following details:

      1. Name: PSX_14
      2. FQDN:

1. 1. 1. psx1.sonusnet.com (example)
      2. Mode: Active

The PSX Master cluster FQDN is added to the SBC

configuration.

Click Save at the top of the SBC Configuration Manager window when you have completed making configuration changes. When prompted, confirm that you want to save all your changes and push the configuration to all nodes in the SBC cluster.