Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
borderColorgreen
bgColortransparent
borderWidth2
Noprint

Back to Table of Contents

Back to Troubleshooting

Back to Troubleshooting - Call Trace Logs and Monitors

Back to Call Trace Logs and Monitors - Call Trace and Packet Capture

Additional sections:

Children Display
styleh6

This object contains signaling packet capture devices and admin state. The Signaling Use the Signaling Packet Capture window to configure the Signaling Packet Capture utility. Signaling Packet Capture data is stored in a ".PKT" file under in the location: /var/log/sonus/evlog/evlog location.

Note

In the absence of any device or filter configuration, The Signaling Packet Capture will capture only the SIP/H323 signaling for calls which are traced by Call Trace Filters.

To View and Edit Signaling Packet Capture

Info
titleNote

This utility is intended for use in debugging and should only be used with a limited number of calls at any one time. 

On the On SBC main screen, go to to Troubleshooting > Troubleshooting Configuration > Call Trace >Signaling Packet Capture.

The Signaling Packet Capture window is displayed.

Caption
0Figure
1Troubleshooting - Call Trace - Signaling Packet Capture

 

The following fields are displayed:Use the following table to edit the fields and then click Save.

Caption
0Table
1Signaling Packet Capture Parameters
ParameterDescription
Signaling Packet Capture TimerSpecifies the The signaling packet capture timer in seconds. It describes the call trace timer , in minutes, for both Calls and Error Trace Filterscall and error trace filters. The value ranges from 0 to 360 seconds and the minutes, with a default value is of 180 seconds.
State

Use this flag to enable/disable Signaling Packet Captures. It also specifies the administrative state of signaling packet capture:signaling packet captures by enabling/disabling the timer.

  • Disable disabled (default)
  •  enabled

...

  • Enable
Info
titleNote

In the absence of any device or filter configuration, the Signaling Packet Capture feature only captures SIP/H.323 signaling for calls which are traced by Call Trace Filters.


Additional topics:

Div
stylepadding-left:1%;
idindent

Children Display
depth2
styleh5

Pagebreak