Page History

An ISO

The re-installation of ISO is required under the following circumstances:

• When incorrect The management IP address is configuredincorrect
• Customers A customer who already evaluated the a special or Engineering engineering release and want wishes to update upgrade to a new GA release

To re-install reinstall the SWe ISO:

1. Right-click the VM instance name and click Edit Settings.

   Caption
   0 Figure 1 Edit Settings

   Include Page
   Screenshot_disclaimer Screenshot_disclaimer

    

2. Click Options tab.

   1. Click Boot Options.

   2. Check Choose the Force BIOS Setup option and click OK.

      Caption
      0 Figure 1 Force BIOS Setup

3. Click Hardware tab.
   
   1. Click CD/DVD drive 1. 

   2. Click Browse... Select the ISO image software file. For example, the ISO file name is sbc-V05.01.00A503-connexip-os_03.01.00-amd64.iso. Click OK to close the Browse Datastores window.

   3. Check Choose the Connect at power on option and click OK.

      Caption
      0 Figure 1 Hardware TabConnect at Power On

4. Right-click the VM instance and click Power > Power On. The BIOS setup window appears.

5. Use right-arrow key to navigate to the Boot tab.

6. Use down-arrow key to select CD-ROM Drive option.
   
   

   Caption
   0 Figure 1 Boot Option - CD-ROM Drive

7. Press + or -  key to bring the CD-ROM Drive option to the top of the boot order.

   Caption
   0 Figure 1 Move CD-ROM First OptionDrive to Top

8. Press F10 to Save and Exit. A setup confirmation appears.

9. Click Yes to save and exit.

   Caption
   0 Figure 1 F10 Setup Confirmation

10. The Connex IP OS Window appears. Select Install and press Enter.

    Caption
    0 Figure 1 ISO Install Screen

    Include Page
    Screenshot_disclaimer Screenshot_disclaimer

11. After the setup is run successfully, right-click the VM instance name and click Edit Settings.

12. Click Hardware tab.

    1. Click CD/DVD drive 1.

    2. Uncheck Deselect the Connect at power on option and click OK.

       Caption
       0 Figure 1 Uncheck Deselect Connect Power On

13. Click Options tab.

    1. Click Boot Options.

    2. Check Choose the Force BIOS Setup option and click OK.

       Caption
       0 Figure 1 Force BIOS Setup

14. Right-click the VM instance name and click Power > Power On to display the BIOS setup window.
    
    1. Use the right-arrow key to navigate to Boot tab
    2. Use down-arrow key to select CD-ROM Drive option.

    3. Press + or - key to change the boot order for CD-ROM Drive back to its original.

    4. Press F10 to Save and exit and to power back your VM.

       Caption
       0 Figure 1 Changing back to original order

...