Tip |
---|
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000. |
Info |
---|
SBC Easy Configuration supports IPv4 only, not IPv6. |
Add_workflow_for_techpubs |
---|
AUTH1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'} |
---|
JIRAIDAUTH | SYM-27506 |
---|
REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
REV6 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
REV3 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'} |
---|
REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'} |
---|
|
The SBC The Sonus SBC 1000/2000 Easy Config interface includes a built-in, step-by-step setup configuration wizard , which enables end-users to quickly deploy Sonus SBC 1000/2000 to enable quick and easy deployment of an SBC and Skype for Business/Lync . The Sonus SBC 1000/2000 can be configured to connect a Skype for Business/Lync environment to a SIP trunk using the automatic setup wizard as described in the section below.or Teams in a Microsoft On Premises environment.
Info |
---|
Using the Easy Configuration wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC. |
The following SIP Trunks are supported:
- ATT &T IP Flexible ReachSIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other Generic SIP TrunkVerizon Managed Service
- Softbank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
Info |
---|
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
...
Select the Application type (SIP ↔ Skype for Business/LyncMicrosoft On Premises). Enter Specify the scenario configuration details based on details in the fields that apply for your deployment settings. Once completed. When you have selected values for all fields, click Next to move to Step 2 (or . Or, click Cancel to return to the main WebUI screen).
Info |
---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
Scenario Parameters - Field Definitions
...
...
Image Added |
Application
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The scenario in which the configuration template is providedClick the arrow to select the scenario that describes your deployment. In this case, select SIP Trunk ↔ Skype for Business/LyncMicrosoft On Premises. |
Scenario Description
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enter the name to describe Skype for Business/Lync setupType up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft On Premises scenario. Info |
---|
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to The Easy Config adds the scenario description as a prefix for all SBC configuration elements created for this deployment. |
|
Telephone Country
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The country in which the SIP ↔ Skype for Business/Lync setup originates. |
Emergency Services
Microsoft On Premises deployment originates. |
Emergency Services
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
Info |
---|
The E911 ELIN |
Note |
---|
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.Options: |
...
Emergency Callback Number 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP trunk used for connection to the Skype for Business/Lync Microsoft UC environment. Valid options : Generic SIP Trunk, AT&T IP Flexible Reach, and Verizon Managed Serviceare: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk,SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk. The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint. |
Version (Microsoft On Premises)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the version of Skype for Business LyncMicrosoft On Premises. Valid options: Skype for Business or , Lync 2010/2013, or Microsoft Cloud Connector Edition. |
noprint
...
Back to top
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Skype for Business/Lync Step 1 - Select Scenario. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
...
ATT SIP Trunk - Field Definitions
...
These fields apply if you selected Generic SIP Trunk in Configure SIP Trunk with Skype for Business/Lync.
...
ATT SIP Trunk in Step 1 - Select Scenario.
...
...
Image Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
AT&T Simultaneous Ring Supported (AT&T Services)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables AT&T Simultaneous Ring. Valid option: Yes or No. |
AT&T IP Toll Free
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
IP Toll Free Access Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
Server Pool Host (Skype for Business)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name of the Lync Server (FQDN). |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. |
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | KDDI SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
|
Image Added |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the FQDN for the service provider's SIP server. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hardcoded to UDP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
Main Telephone Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The main telephone number for the KDDI SIP trunk |
Called Prefix (FMC Service)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the city code and office code for setting up transformation rules for the FMC service. |
Address of Record URI
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the Address of Record of the client that is registered on the SIP server. |
Static Host (SIP Profile)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the host and port information for the FQDN or IP address used in the From Header. |
...
Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID (Remote Authorization Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies a user name to use in response to a challenge. |
Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password for the Authentication ID. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-enter the password for the Authentication ID. |
DNS Server IP (Split DNS Table)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks. |
Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Domain name associated with the DNS IP address. |
Caption |
---|
0 | Figure |
---|
1 | Select ISDN Ports |
---|
|
Image Added |
NTT DOCOMO Officelink- Field Definitions
These fields apply if you selected AT&T IP Flexible Reach in Configure SIP Trunk with Skype for Business/Lync.
...
NTT DOCOMO Officelink in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | NTT DOCOMO Officelink Trunk |
---|
|
Image Added |
Office Link FOMA-R
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Host IP address of the SIP Server. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062. |
CUG Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the SIP Server. |
Server Pool Host (Skype for Business)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool FQDN or IP Address of the Lync Server (FQDN). |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port number
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
Other SIP Trunk - Field Definitions
...
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
...
|
Image Added |
...
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
Port Number
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Server Pool Host (Skype for Business)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name of the Lync Server (FQDN). |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
...
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port Number (Server Pool)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | SoftBank White Office |
---|
|
Image Added |
WAN Link
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
...
Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The host IP address or FQDN for the SIP server |
Gateway ID (Remote Authorization Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The ID used for authenticating with the router at the gateway of the network |
Gateway Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password used for authenticating with the router at the gateway of the network. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-entry of the password for the router serving as network gateway. |
Address of Record URI (Contract Registrant Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabledpublic address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer. |
Server Pool Host
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name FQDN or IP Address of the Lync Server (FQDN). |
Protocol
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP. |
Port number
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Telstra Enterprise SIP Connect |
---|
|
Image Added |
NAT Public Interface
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public interface used for Network Address Translation (NAT). |
State
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID (SIP Connect Authentication)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The User ID for use in authentication. |
Authentication Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password to use when authenticating with the User ID. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
Server Pool Host (Skype for Business)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool FQDN or IP Address of the Lync Server (FQDN). |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. |
...
Verizon SIP Trunk - Field Definitions
...
These fields apply if you selected Verizon Managed Service in Configure SIP Trunk with Skype for Business/Lync.
...
SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Verizon Managed Service |
---|
|
...
Image Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name of the Skype for Business / Lync Server (FQDN). |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. |
Noprint |
Back to top
Step 3 - Confirm and Submit Configuration
This step displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
...
This example displays a SIP ↔ Skype for Business/Lync Microsoft On Premises configuration with a Generic KDDI SIP Trunk.
...
...
Image Added |