Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel

 

In this section:

Table of Contents

Info
iconfalse

...

Column
width40%
Panel
titleTable of Contents
Table of Contents

...

Info
titleAbout this Page

This document details the steps and inter-related parameters to establish an ISDN to SIP Server configuration using TLS transport.

...

...

Prerequistes

...

SBC Network Configuration Summary - ISDN to TLS SIP Server

Panel
borderStylenone

Caption
0Figure
1ISDN to TLS SIP Server

Image Modified

 

Configuration Steps

The Lync Wizard Task

The configuration process of an SBC should always begin with running a wizard. However, the wizard only needs to be run for the very first configuration.

Panel
borderStylenone

Caption
0Figure
1Lync Wizard Task

Image Removed

 

Media Configuration for TCP/RTP

...

Configure the Media and TLS profile for the ISDN to TLS SIP Server call

...

Panel
borderStylenone

Caption
0Figure
1TLS Media Configuration Flow

Image Removed

 

...

:

Media Configuration Steps

1. Ensure there is a media profile for your preferred codec.
2. Review the Crypto Profile.
3. Verify the Media list for Media and Crypto Profiles.
4. Verify the TLS Profile.

In the SIP Server Table:
5. Add a SIP Server Host for the FE/SBA FQDN and set the TLS profile.
6. Set the SIP Options and the

...

TLS Reuse Parameters.

In the destination Signaling Group:

...

7. Set the Media List entry.

...

8. Set the Federated FE/SBA FQDN and port:5067/protocol:TLS/TLS Profile.

...

9. Set the SIP Server Table entry.

Call Routing Configuration

...

Panel
borderStylenone

Caption
0Figure
1ISDN to Lync Call Routing Configuration Flow

Image Removed 

 

Configure a call route from ISDN to the TLS SIP Server

...

as follows:

Call Configuration Steps

1. Create a translation table/entry to perform any necessary number translations.
2. Create a Call Route entry. Configure the translation table name and Egress SG

...

, enable transcoding, and

...

configure the appropriate media list entry.

In the Ingress SG:

...

3. Verify/Set the Call Route Table and

...

incoming ISDN port.

Other Important Information

Info

You will still need to configure the SBC for the appropriate certificates in order to complete TLS calls.

Info

Click here to download the full size diagrams from this article

...

Pagebreak