Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
top
top

CSS Stylesheet
img.confluence-embedded-image { display: inline-block !important; }

Add_workflow_for_techpubs
AUTH1
AUTH1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'}AUTH2
JIRAIDAUTHSYM-2419527506
REV5UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6REV3REV1UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'}

Tip
Tip

Using the Easy Configuration wizard to configure the

Spacevars
0product
(SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.

...

The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard to enable quick and easy deployment of an SBC and Skype for Business/Lync in a Microsoft Teams environment. 

...

  • ATT SIP Trunk
  • KDDI SIP Trunk
  • NTT DOCOMO Officelink
  • Other SIP Trunk
  • Softbank White Office
  • Telstra Enterprise SIP Connect
  • Verizon SIP Trunk

 

Info

NTT DOCOM DOCOMO Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in the SBC Edge 1000-2000 only.

...

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents
maxLevel3

Step 1 - Select Scenario

...

Info

These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.

 

Select the Application type (SIP Trunk↔ Microsoft Teams). Specify the scenario details in the fields that apply for your deployment. When you have selected values for all fields, click Next to move to Step 2. Or, click Cancel to return to the main WebUI screen.

...

Panel
bgColor#FAFAFA
borderStylenone

Type up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft Teams scenario. 

Info

The Easy Config adds the scenario description as a prefix for all SBC configuration elements created for this deployment.

...

Info

The E911 ELIN number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

...

Emergency Callback Number 1

...

Panel
bgColor#FAFAFA
borderStylenone

The SIP trunk used for connection to the Microsoft On Premises Teams environment. Valid options are: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk, SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. For more information, refer to Step 2 - Configure SIP Details for Endpoint.

...

Panel
bgColor#FAFAFA
borderStylenone
 Defines the calling client user type. Valid options: Microsoft Teams

 

Step 2 - Configure SIP Details for Endpoint

Specify the scenario configuration details based on the SIP Trunk selected in Step 1 - Select Scenario.  Once completed, click Next to move to Step 3.  (Or, click Previous to return to the previous screen). 

ATT SIP Trunk - Field Definitions

These fields apply if you selected ATT SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1ATT SIP Trunk

Image AddedImage Removed

 

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or IP address of the Session Border Controller Remote Peer service provider.

Protocol 

...

Panel
bgColor#FAFAFA
borderStylenone

Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. 

...

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

...

Outbound NAT Traversal

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

...

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

...

Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

...

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.

Server Pool Host 1

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-allFQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

...

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
 HardHard-coded value for protocol used with federated FQDN: TLS

...

FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

Server Pool Host 3

Panel
bgColor#FAFAFA
borderStylenone
 Hard Hard-coded value FQDN for the port used for TLS: 5061

Pagebreak

 

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1KDDI SIP Trunk
3KDDI SIP Trunk

Image Removed

SIP Server

location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone

Type the FQDN for the service provider's SIP server.

Protocol

Panel
bgColor#FAFAFA
borderStylenone

Hardcoded to UDP.

...

 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
Type  Hard-coded value for the port number used for sending and receiving SIP messages between the SBC and the Border Element Server.

Main Telephone Number

Panel
bgColor#FAFAFA
borderStylenone

The main telephone number associated with the KDDI SIP trunk.

...

TLS: 5061

Pagebreak

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1KDDI SIP Trunk
3KDDI SIP Trunk

Image Added

 

SIP Server

Panel
bgColor#FAFAFA
borderStylenone

  Type the city code and office code for setting up transformation rules for the FMC service.

...

FQDN for the service provider's SIP server.

Protocol

Panel
bgColor#FAFAFA
borderStylenone

 Type the Address of Record of the client that is registered on the SIP server.

...

Hardcoded to UDP.

Port Number

Panel
bgColor#FAFAFA
borderStylenone

Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server.

Main Telephone Number

Panel
bgColor#FAFAFA
borderStylenone

The main telephone number associated with the KDDI SIP trunk.

Called Prefix (FMC Service)

Panel
bgColor#FAFAFA
borderStylenone

  Type the city code and office code for setting up transformation rules for the FMC service.

Address of Record URI

Panel
bgColor#FAFAFA
borderStylenone

 Type the Address of Record of the client that is registered on the SIP server.

Static Host (SIP Profile)

Panel
bgColor#FAFAFA
borderStylenone

Type the host and host and port information for the FQDN or IP address used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

...

Panel
bgColor#FAFAFA
borderStylenone

Click (Image RemovedImage Added) to specify the DNS server IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks.

...

Caption
0Figure
1Add Split DNS Entry

Pagebreak

 

...

Caption
0Figure
1NTT DOCOMO Officelink Trunk

Image Removed

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Office Link FOMA-R

Panel
bgColor#FAFAFA
borderStylenone
The Host

Click the drop-down arrow to select the external (Internet-facing) IP address of the

SIP Server.

Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

Outbound NAT TraversalProtocol

Panel
bgColor#FAFAFA
borderStylenone
 The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.

 

Port Number

Panel
bgColor#FAFAFA
borderStylenone
 The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062.

CUG Domain Name

Panel
bgColor#FAFAFA
borderStylenone
The FQDN of the SIP Server.

...

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

...

Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

...

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.

Server Pool Host 1

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host

2

1:

sip2

sip.pstnhub.microsoft.com

Server Pool Host

...

2

Panel
bgColor#FAFAFA
borderStylenone
 HardHard-coded FQDN for the location of the server list for Server Pool Host 32:  sip3 sip2.pstnhub.microsoft.com

...

Server Pool Host 3

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
 HardHard-coded value for the port used for TLS: 5061

 

...


Pagebreak

These fields apply if you selected Other SIP Trunk in NTT DOCOMO Officelink in Step 1 - Select Scenario.

Caption
0Figure
1Other SIP NTT DOCOMO Officelink Trunk

Image Removed

...

Image Added

 

Office Link FOMA-R

Panel
bgColor#FAFAFA
borderStylenone
The FQDN or Host IP address of the Session Border Controller service providerSIP Server.

...

Protocol

Panel
bgColor#FAFAFA
borderStylenone
The  The IP protocol used for sending and receiving SIP messages between SBC and the Border Element SIP Server. Valid entry UDP or TCP.Default value: UDP.

 

Port

...

Number

Panel
bgColor#FAFAFA
borderStylenone
The  The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

...

SIP Server. Default value: 5062.

CUG Domain Name

Panel
bgColor#FAFAFA
borderStylenone

Enables or disables the secondary Session Border Controller service provider configured. 

Secondary Border Element Server

The FQDN of the SIP Server.

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Panel
Panel
bgColor#FAFAFA
borderStylenone

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

...

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.


Outbound NAT Traversal

Panel
bgColor#FAFAFA
borderStylenone

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number 

Panel
bgColor#FAFAFA
borderStylenone

The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

 

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

...

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

...

Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

...

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. I

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.

Server Pool Host 1

Panel
bgColor#FAFAFA
borderStylenone
 Hard

Hard-coded FQDN for the location of the server list for Server Pool Host

3

1:

 sip3

sip.pstnhub.microsoft.com

...

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-allthe location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

...

Server Pool Host 3

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

...

FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone
 Hard

Hard-coded

value for the port used for TLS: 5061

 

Pagebreak

...

federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for the port used for TLS: 5061

Other SIP Trunk - Field Definitions

These fields apply if you selected SoftBank White Office in  Other SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1SoftBank White Office

Image Removed

...

Other SIP Trunk

Image Added

 

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.

...

FQDN or IP address of the Remote Peer service provider.

Protocol 

Panel
bgColor#FAFAFA
borderStylenone

Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.

...

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

Port Number 

Panel
bgColor#FAFAFA
borderStylenone

The host IP address or FQDN for the SIP server

...

SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Use Secondary Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The ID used for authenticating with the router at the gateway of the network

...

Enables or disables the secondary Remote Peer service provider configured. 

Secondary Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The password used for authenticating with the router at the gateway of the network.

Confirm Password

Panel
bgColor#FAFAFA
borderStylenone

Re-entry of the password for the router serving as network gateway.  

...

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol

Panel
bgColor#FAFAFA
borderStylenone

The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer.Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number 

Panel
bgColor#FAFAFA
borderStylenone

The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

...

Outbound NAT Traversal

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

Server Pool Host 3

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

...

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

...

Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.

Server Pool Host 1

Panel
Panel
bgColor#FAFAFA
borderStylenone
 Hard

Hard-coded

value

FQDN for the

port used for TLS: 5061

...

location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

Server Pool Host 3

These fields apply if you selected Telstra Enterprise SIP Connect  in Step 1 - Select Scenario.

Caption
0Figure
1Telstra Enterprise SIP Connect

Image Removed

NAT Public Interface

Panel
bgColor#FAFAFA
borderStylenone

The public interface used for Network Address Translation (NAT).

...

Panel
bgColor#FAFAFA
borderStylenone

The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).

...

 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone

Hard coded as UDP and Port 5060.

...

-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone

The IPv4 address used to create a Split DNS entry for the Telstra domain.

...

 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone

The SIP Connect Domain or Realm to which the specified IP address will map.

Authentication User ID (SIP Connect Authentication)

Panel
bgColor#FAFAFA
borderStylenone

The User ID for use in authentication.

...

 Hard-coded value for the port used for TLS: 5061

Pagebreak

SoftBank White Office - Field Definitions

These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.

Caption
0Figure
1SoftBank White Office

Image Added

 

Panel
bgColor#FAFAFA
borderStylenone

The password to use when authenticating with the User ID.

...

method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.

Signaling/Media Source IP

Panel
bgColor#FAFAFA
borderStylenone

The re-entered password for confirmation.

...

Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.

SIP Server

Panel
bgColor#FAFAFA
borderStylenone

The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.

...

host IP address or FQDN for the SIP server

Gateway ID (Remote Authorization Entry)

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

...

The ID used for authenticating with the router at the gateway of the network

Gateway Password

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

...

The password used for authenticating with the router at the gateway of the network.

Confirm Password

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location

Re-entry of the

server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

...

password for the router serving as network gateway.  

Address of Record URI (Contract Registrant Entry)

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

...

The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer.

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing : sip-all.pstnhub.microsoft.com

...

server that handles routing of messages for signaling and media.

Outbound NAT Traversal

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for the port used for TLS: 5061

 

...

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.

Server Pool Host 1

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

Server Pool Host 3

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for the port used for TLS: 5061


Telstra Enterprise SIP Connect - Field Definitions

These fields apply if you selected Telstra Enterprise SIP Connect  in Step 1 - Select Scenario.

Caption
0Figure
1Telstra Enterprise SIP Connect

Image Added

 

NAT Public Interface

Panel
bgColor#FAFAFA
borderStylenone

The public interface used for Network Address Translation (NAT).

State

Panel
bgColor#FAFAFA
borderStylenone

The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).

Protocol and Port

Panel
bgColor#FAFAFA
borderStylenone

Hard coded as UDP and Port 5060.

SIP Connect DNS IP

Panel
bgColor#FAFAFA
borderStylenone

The IPv4 address used to create a Split DNS entry for the Telstra domain.

SIP Connect Domain/Realm

Panel
bgColor#FAFAFA
borderStylenone

The SIP Connect Domain or Realm to which the specified IP address will map.

Authentication User ID (SIP Connect Authentication)

Panel
bgColor#FAFAFA
borderStylenone

The User ID for use in authentication.

Authentication Password

Panel
bgColor#FAFAFA
borderStylenone

The password to use when authenticating with the User ID.

Confirm Password

Panel
bgColor#FAFAFA
borderStylenone

The re-entered password for confirmation.

Trunk Pilot Number

Panel
bgColor#FAFAFA
borderStylenone

The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

Outbound NAT Traversal

Panel
bgColor#FAFAFA
borderStylenone

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.

Server Pool Host 1

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

Server Pool Host 3

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for the port used for TLS: 5061


Verizon SIP Trunk - Field Definitions

These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1Verizon SIP Trunk

Image Added

 

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or IP address of the Remote Peer service provider.

Protocol 

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.

Port Number 

Panel
bgColor#FAFAFA
borderStylenone

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

Outbound NAT Traversal

Panel
bgColor#FAFAFA
borderStylenone

Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:

Enable: Network Address Translation is used for the NAT device's Public IP address.

Disable: Network Address Translation address translation is not used.

NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.

Public IP Address

These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1Verizon Managed Service

 Image Removed

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or Specifies the Public IP address of the Session Border Controller service provider.

Protocol 

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.

...

NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.

Apply ACL

Panel
bgColor#FAFAFA
borderStylenone

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Signaling/Media Source IP (Microsoft Teams Direct Routing)

Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.

Valid selection:

True: Applies the ACL

False: Does not apply the ACL. 

For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists

Panel
bgColor#FAFAFA
borderStylenone

Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.

Server Pool Host 1

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com

Server Pool Host 2

Panel
bgColor#FAFAFA
borderStylenone
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com

...

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded FQDN for the location of the server list for Server Pool Host 3:  sip3.pstnhub.microsoft.com

Federated FQDN

Panel
bgColor#FAFAFA
borderStylenone

Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com

Protocol

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for protocol used with federated FQDN: TLS

Port

Panel
bgColor#FAFAFA
borderStylenone
 Hard-coded value for the port used for TLS: 5061

...