| CSS Stylesheet |
|---|
img.confluence-embedded-image { display: inline-block !important; } |
| Add_workflow_for_techpubs |
|---|
| AUTH1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'} |
|---|
| JIRAIDAUTH | SYM-1971327506 |
|---|
| REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV6 | REV3 | REV4 | REV1 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV3 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'} |
|---|
| REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'} |
|---|
|
| Tip |
|---|
Usage of the Easy Config wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC. |
The SBC Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC in an Enterprise's Lync VoIP environment with a SIP Trunk Provider to an IP phone. The SBC can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
...
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
- Broadsoft Trunk
| Note |
|---|
NTT DOCOM DOCOMO Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
| Note |
|---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
| Note |
|---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario - Field Definitions
| Caption |
|---|
|
 Image Modified
|
Scenario Parameters
Application
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
|
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
Name (SIP Trunk)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the IP phones. Valid options: ATT SIP Trunk, Other SIP Trunk, Verizon SIP Trunk, KDDI SIP Trunk, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP Phone Registrar. This field is fixed. |
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
These fields apply if you selected AT&T IP Flexible Reach SIP Trunk in Step 1 - Select Scenario.
...
...
...
|
 Image Modified
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
Protocol (Border Element Server)
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
Secondary Border Element Server
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
AT&T
...
Simultaneous Ring Supported
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables support for the AT&T Forking FeatureSimulataneous Ring feature. Valid option: Yes or No. |
AT&T IP Toll Free
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (  Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
|
 Image Modified
|
KDDI SIP Trunk - Field Definitions
...
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | KDDI SIP Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
|
...
 Image Added
|
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN or IP address of the Session Border Controller service provider. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Main Telephone Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The main telephone number associated with the SIP trunk. |
Called Prefix (FMC Service)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Used for setting up transformation rules for the FMC service.
|
Address of Record URI (Contact Registrant Entry)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Address of Record of the client that is registered on the SIP server.
|
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID (Remote Authorization Entry)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Specifies a The user name identification to use in response to a challengeauthentication. |
Enter Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The password for the Authentication to use when authenticating with the user ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Re-enter the password for the Authentication IDto use with authentication for confirmation. |
DNS Server IP (Split DNS Table)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP IP address (IPv4 or IPv6) of the DNS server.) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks. |
Domain Name Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Domain Domain name associated with the DNS IP address. |
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Add Split DNS Entry |
|---|
|
|
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan (IP Phone Registrar)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. For SIP Registrar, refer to |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides.To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Removed |
in which the IP phones resides. |
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | NTT DOCOMO Officelink Trunk |
|---|
|
 Image Removed Image Added |
Office Link FOMA-R
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Host IP address of the SIP Server. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN of the SIP Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( Image Removed  Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Modified |
Other SIP Trunk - Field Definitions
...
...
These fields apply if you selected Generic Other SIP Trunk in Step 1 - Select Scenario.
...
...
...
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use used for sending and receiving SIP messages between SBC the and the Border Element Server. Valid entry UDP or TCP. |
Port Number
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC the and the Border Element Server. Default entry: 5060. |
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port
...
Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC the and the Secondary Border Element server. Default entry: 5060. This field is available only when Use Secondary Border Element Server is Enabled.. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC the and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP.: IP address for the destination host or subnet in which the IP phone resides. Netmask.: The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
...
Image Added |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | SoftBank White Office |
|---|
|
 Image Removed Image Added
|
WAN Link
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-entry of the password for the router serving as the network gateway. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image RemovedImage Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Modified |
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Telstra Enterprise SIP Connect Trunk |
|---|
|
 Image Removed Image Added
|
NAT Public Interface
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The public interface used for Network Address Translation (NAT). |
State
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Modified |
|
Verizon SIP Trunk - Field Definitions
...
...
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
...
...
|
 Image Added
|
...
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image RemovedImage Added) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
...
Image Added |
Broadsoft Trunk - Field Definitions
...
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
...
...
...
 Image Added |
Server Domain
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN of the server domain. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
...
Image Added |
Step 3 - Confirm and Submit Configuration
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
...
...
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.
...
...
...
 Image Added
|
