Page History

...

Add_workflow_for_techpubs

REV3	REV4	REV1
AUTH1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'}
JIRAIDAUTH	SYM-1971327506
REV5	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}

...

Spacevars

0	product

...

UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'}

The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard , which enables end-users to quickly deploy to enable quick and easy deployment of an SBC and Skype for Business/Lync . The SBC can be configured to connect or Teams in a Microsoft UC environment to a SIP trunk using the automatic setup wizard as described in the section below.On Premises environment.

Info
Using the Easy Configuration wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.

The following SIP Trunks are supported:

ATT SIP Trunk
KDDI SIP Trunk
NTT DOCOMO Officelink
Other SIP Trunk
Softbank White Office
Telstra Enterprise SIP Connect
Verizon SIP Trunk

Noteinfo
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents

maxLevel	3

Step 1 - Select Scenario

...

Select the Application type (SIP ↔ Microsoft On Premises). Enter Specify the scenario configuration details based on details in the fields that apply for your deployment settings. Once completed. When you have selected values for all fields, click Next to move to Step 2 (or . Or, click Cancel to return to the main WebUI screen).

Scenario Parameters - Field Definitions

Info
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.

Scenario Parameters - Field Definitions

Caption

0

Caption

0	Figure
1	Step 1

Image Modified

Application

Panel

bgColor	#FAFAFA
borderStyle	none

The scenario in which the configuration template is providedClick the arrow to select the scenario that describes your deployment. In this case, select SIP Trunk ↔ Microsoft On Premises.

Scenario Description

Panel

bgColor	#FAFAFA
borderStyle	none

Enter the name to describe Type up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft On Premises setupscenario.

Info
This value will be prefixed on all the The Easy Config adds the scenario description as a prefix for all SBC configuration elements created by the Setup Wizard pertaining to for this deployment.

Telephone Country

Panel

bgColor	#FAFAFA
borderStyle	none

The country in which the SIP ↔ Microsoft On Premises setup deployment originates.

Emergency Services

...

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options: ELIN Identifier, E911/E112 or None.

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options:

Info

The E911 ELIN number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911

Note

The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Panel

bgColor	#FAFAFA
borderStyle	none

...

Emergency Callback Number 1

Panel

bgColor	#FAFAFA
borderStyle	none

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

Panel

bgColor	#FAFAFA
borderStyle	none

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

PSAP Number

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

SIP Sessions

Panel

bgColor	#FAFAFA
borderStyle	none

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

Name (SIP Trunk)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP trunk used for connection to the Microsoft UC environment. Valid options are: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk,SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint.

Version (Microsoft On Premises)

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the version of Microsoft On Premises. Valid options: Skype for Business, Lync 2010/2013, or Microsoft Cloud Connector Edition.

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

ATT SIP Trunk - Field Definitions

These fields apply if you selected ATT SIP Trunk in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	ATT SIP Trunk

Image Modified

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller the Remote Peer service provider.

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Simultaneous Ring Supported (AT&T Services)

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables AT&T Simultaneous Ring. Valid option: Yes or No.

AT&T IP Toll Free

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

Server Pool Host

...

(Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name of the Lync Server (FQDN).

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	KDDI SIP Trunk
3	KDDI SIP Trunk

Image Modified

SIP Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller service providerType the FQDN for the service provider's SIP server.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

Hardcoded to UDP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server.

...

Main Telephone Number

Panel

bgColor	#FAFAFA
borderStyle	none

The main telephone number for the KDDI SIP trunk

Called Prefix (FMC Service)

Panel

bgColor	#FAFAFA
borderStyle	none

Type the city code and office code for setting up transformation rules for the Used for setting up transformation rules for the FMC service.

Address of Record URI

Panel

bgColor	#FAFAFA
borderStyle	none

Type the Address of Record of the client that is registered on the SIP server.

Static Host (SIP Profile)

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies Type the host portion of and port information for the FQDN or IP address used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

Pagebreak

Authentication ID (Remote Authorization Entry)

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies a user name to use in response to a challenge.

...

Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password for the Authentication ID.

Confirm

...

Password

Panel

bgColor	#FAFAFA
borderStyle	none

Re-enter the password for the Authentication ID.

DNS Server IP (Split DNS Table)

Panel

bgColor	#FAFAFA
borderStyle	none

IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks.

Domain

...

Name

Panel

bgColor	#FAFAFA
borderStyle	none

Domain name associated with the DNS IP address.

Port Type

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.

Noprint
QUESTIONS for SMEs: Select IDSN Ports options do not appear. No reference on a dialog for T1/E1 ports. Shows Add Split DNS Entry on devux168 and 10.37....SBC1000. Other differences: Switch Variant Options, Skype Options (No CCE) and a Main Telephone Number field added for KDDI SIP Trunk.

DS1 Ports

Panel

bgColor	#FAFAFA
borderStyle	none

The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port).

For example, click Add. Select the desired PSTN port and OK.

Caption

0	Figure
1	Select ISDN Ports

Image RemovedImage Removed

Switch Variant

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the ISDN variant for the port type in the ISDN Signaling Group.

For T1

ATT 4EES
ATT 5EES
DMS 100
N12
Euro ISDN
QSIG
Japanese ISDN

For E1:

Euro ISDN
QSIG

ISDN Number Translation

Panel

bgColor	#FAFAFA
borderStyle	none

Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).

PBX Prefix

Panel

bgColor	#FAFAFA
borderStyle	none

The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension.

Extension Length

...

bgColor	#FAFAFA
borderStyle	none

.

Caption

0	Figure
1	Select ISDN Ports

Image Added

...

Pagebreak

NTT DOCOMO Officelink- Field Definitions

These fields apply if you selected NTT DOCOMO Officelink in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	NTT DOCOMO Officelink Trunk

Image Modified

Office Link FOMA-R

...

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.

Image Removed

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062.

...

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN of the SIP Server.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool FQDN or IP Address of the Lync Server (FQDN).

...

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.

Other SIP Trunk - Field Definitions

These fields apply if you selected Other SIP Trunk in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	Other SIP Trunk

Image Modified

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller the Remote Peer service provider.

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol

...

Panel
bgColor #FAFAFA
borderStyle none
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name of the Lync Server (FQDN).

Protocol

...

Panel
bgColor #FAFAFA
borderStyle none
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

SoftBank White Office - Field Definitions

These fields apply if you selected SoftBank White Office in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	SoftBank White Office

Image Modified

WAN Link

Panel

bgColor	#FAFAFA
borderStyle	none

The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.

Signaling/Media Source IP

Panel

bgColor	#FAFAFA
borderStyle	none

The Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.

SIP Server

Panel

bgColor	#FAFAFA
borderStyle	none

The host IP address or FQDN for the SIP server.

Gateway ID (Remote Authorization Entry)

Panel

bgColor	#FAFAFA
borderStyle	none

The ID used for authenticating with the router at the gateway of the network.

Gateway Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password used for authenticating with the router at the gateway of the network.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

Re-entry of the password for the router serving as network gateway.

Address of Record URI (Contract Registrant Entry)

Panel

bgColor	#FAFAFA
borderStyle	none

The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer.

Server Pool Host

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool FQDN or IP Address of the Lync Server (FQDN).

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.

Telstra Enterprise SIP Connect - Field Definitions

These fields apply if you selected Telstra Enterprise SIP Connect in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	Telstra Enterprise SIP Connect

Image Modified

NAT Public Interface

Panel

bgColor	#FAFAFA
borderStyle	none

The public interface used for Network Address Translation (NAT).

State

Panel

bgColor	#FAFAFA
borderStyle	none

The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).

Protocol and Port

Panel

bgColor	#FAFAFA
borderStyle	none

Hard coded as UDP and Port 5060.

SIP Connect DNS IP

Panel

bgColor	#FAFAFA
borderStyle	none

The IPv4 address used to create a Split DNS entry for the Telstra domain.

SIP Connect Domain/Realm

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Connect Domain or Realm to which the specified IP address will map.

Authentication User ID (SIP Connect Authentication)

Panel

bgColor	#FAFAFA
borderStyle	none

The User ID for use in authentication.

Authentication Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password to use when authenticating with the User ID.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

The re-entered password for confirmation.

Trunk Pilot Number

Panel

bgColor	#FAFAFA
borderStyle	none

The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.

Server Pool

...

Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool FQDN or IP Address of the Lync Server (FQDN).

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.

...

Verizon SIP Trunk - Field Definitions

These fields apply if you selected Verizon SIP Trunk in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.

Caption

0	Figure
1	Verizon Managed Service

Image Modified

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller the Remote Peer service provider.

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name of the Skype for Business / Lync Server (FQDN).

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

Step 3 - Confirm and Submit Configuration

This step displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).

This example displays a SIP ↔ Microsoft On Premises configuration with a KDDI SIP Trunk.

Caption

0	Figure
1	Step 3

Image Modified

Pagebreak

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 13

New Version Current

Key

Step 1 - Select Scenario

Scenario Parameters - Field Definitions

Scenario Parameters - Field Definitions

Application

Scenario Description

Telephone Country

Emergency Callback Number 1

Emergency Callback Number 2

PSAP Number

SIP Sessions

Name (SIP Trunk)

Version (Microsoft On Premises)

Step 2 - Configure SIP Details for Endpoint

ATT SIP Trunk - Field Definitions

Border Element Server

Protocol

Port

Number

Use Secondary Border Element Server

Secondary Border Element Server

Protocol

Port

Number

AT&T Simultaneous Ring Supported (AT&T Services)

AT&T IP Toll Free

IP Toll Free Access Number

Server Pool Host

(Skype for Business)

Protocol

Port Number (Server Pool)

KDDI SIP Trunk - Field Definitions

SIP Server

Protocol

Port Number

Main Telephone Number

Called Prefix (FMC Service)

Address of Record URI

Static Host (SIP Profile)

Authentication ID (Remote Authorization Entry)

Password

Confirm

Password

DNS Server IP (Split DNS Table)

Domain

Name

Port Type

DS1 Ports

Switch Variant

ISDN Number Translation

PBX Prefix

Extension Length

NTT DOCOMO Officelink- Field Definitions

Other SIP Trunk - Field Definitions

Border Element Server

Protocol

Port

Number

Use Secondary Border Element Server

Secondary Border Element Server

Protocol

PanelbgColor#FAFAFAborderStylenoneThe Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port

Number

Server Pool Host (Skype for Business)

Protocol

PanelbgColor#FAFAFAborderStylenoneThe IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

SoftBank White Office - Field Definitions

WAN Link

Signaling/Media Source IP

SIP Server

Gateway ID (Remote Authorization Entry)

Gateway Password

Panel
bgColor #FAFAFA
borderStyle none
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Panel
bgColor #FAFAFA
borderStyle none
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.