...
Add_workflow_for_techpubs |
---|
AUTH1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'} |
---|
JIRAIDAUTH | SYM-1971327506 |
---|
REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
REV6 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
REV3 | REV4 | REV1 |
---|
|
...
...
UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'} | REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'} |
---|
|
The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard , which enables end-users to quickly deploy to enable quick and easy deployment of an SBC and Skype for Business/Lync . The SBC can be configured to connect or Teams in a Microsoft UC environment to a SIP trunk using the automatic setup wizard as described in the section below.On Premises environment.
Info |
---|
Using the Easy Configuration wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC. |
The following SIP Trunks are supported:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- Softbank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
Noteinfo |
---|
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
...
...
Select the Application type (SIP ↔ Microsoft UCOn Premises). Enter Specify the scenario configuration details based on details in the fields that apply for your deployment settings. Once completed. When you have selected values for all fields, click Next to move to Step 2 (or . Or, click Cancel to return to the main WebUI screen).
Scenario Parameters - Field Definitions
Info |
---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
Scenario Parameters - Field Definitions
Caption |
---|
|
Caption |
---|
|
Image AddedImage Removed |
Application
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The scenario in which the configuration template is providedClick the arrow to select the scenario that describes your deployment. In this case, select SIP Trunk ↔ Microsoft UCOn Premises. |
Scenario Description
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enter the name to describe Microsoft UC setupType up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft On Premises scenario. Info |
---|
This value will be prefixed on all the The Easy Config adds the scenario description as a prefix for all SBC configuration elements created by the Setup Wizard pertaining to for this deployment. |
|
Telephone Country
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The country in which the SIP ↔ Microsoft UC setup On Premises deployment originates. |
Emergency Services
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
Info |
---|
The E911 ELIN number from the " |
Note |
---|
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables. |
Emergency Callback Number 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
Emergency Callback Number 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Call Back Number Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP trunk used for connection to the Microsoft UC environment. Valid options are: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk,SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk. The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint. |
Version (Microsoft
...
On Premises)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the version of Microsoft UCOn Premises. Valid options: Skype for Business, Lync 2010/2013, or Microsoft Cloud Connector Edition. |
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
These fields apply if you selected ATT SIP Trunk in Configure SIP Trunk with Microsoft UCStep 1 - Select Scenario.
Caption |
---|
|
Image RemovedImage Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
AT&T Simultaneous Ring Supported (AT&T
...
Services)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables AT&T Forking FeatureSimultaneous Ring. Valid option: Yes or No. |
AT&T IP Toll Free
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name of the Lync Server (FQDN). |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
These fields apply if you selected KDDI SIP Trunk in Configure SIP Trunk with Microsoft UCStep 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | KDDI SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
|
Image RemovedImage Added |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service providerType the FQDN for the service provider's SIP server. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hardcoded to UDP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
Main Telephone Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The main telephone number for the KDDI SIP trunk |
Called Prefix (FMC Service)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Used Type the city code and office code for setting up transformation rules for the FMC service. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the Address of Record of the client that is registered on the SIP server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies Type the host portion of and port information for the FQDN or IP address used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID (Remote Authorization Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies a user name to use in response to a challenge. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password for the Authentication ID. |
Confirm
...
Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-enter the password for the Authentication ID. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Domain name associated with the DNS IP address. |
Port Type
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1. |
DS1 Ports
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port). For example, click Add. Select the desired PSTN port and OK. Caption |
---|
0 | Figure |
---|
1 | Select ISDN Ports |
---|
| Image Removed |
|
Switch Variant
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the ISDN variant for the port type in the ISDN Signaling Group. For T1 - ATT 4EES
- ATT 5EES
- DMS 100
- N12
- Euro ISDN
- QSIG
- Japanese ISDN
For E1: |
ISDN Number Translation
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits). |
PBX Prefix
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension. |
...
The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks. |
Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
| The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.
Domain name associated with the DNS IP address. |
Caption |
---|
0 | Figure |
---|
1 | Select ISDN Ports |
---|
|
Image Added |
NTT DOCOMO Officelink- Field Definitions
These fields apply if you selected NTT DOCOMO Officelink in Configure SIP Trunk with Microsoft UCStep 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | NTT DOCOMO Officelink Trunk |
---|
|
Image RemovedImage Added |
Office Link FOMA-R
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the SIP Server. |
Server Pool Host (Skype for Business)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool FQDN or IP Address of the Lync Server (FQDN). |
...
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
These fields apply if you selected Other SIP Trunk in Configure SIP Trunk with Microsoft UC Step 1 - Select Scenario.
Caption |
---|
|
Image RemovedImage Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name of the Lync Server (FQDN). |
Protocol
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
These fields apply if you selected SoftBank White Office in Configure SIP Trunk with Microsoft UCStep 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | SoftBank White Office |
---|
|
Image RemovedImage Added |
WAN Link
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The host IP address or FQDN for the SIP server. |
Gateway ID (Remote Authorization Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The ID used for authenticating with the router at the gateway of the network. |
Gateway Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password used for authenticating with the router at the gateway of the network. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-entry of the password for the router serving as network gateway. |
Address of Record URI (Contract Registrant Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool FQDN or IP Address of the Lync Server (FQDN). |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
These fields apply if you selected Telstra Enterprise SIP Connect in Configure SIP Trunk with Microsoft UCStep 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Telstra Enterprise SIP Connect |
---|
|
Image RemovedImage Added |
NAT Public Interface
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public interface used for Network Address Translation (NAT). |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard coded as UDP and Port 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The User ID for use in authentication. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password to use when authenticating with the User ID. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The re-entered password for confirmation. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool FQDN or IP Address of the Lync Server (FQDN). |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
...
Port number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067. |
...
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon SIP Trunk in Configure SIP Trunk with Microsoft UCStep 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Verizon Managed Service |
---|
|
Image Removed Image Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Pool name of the Skype for Business / Lync Server (FQDN). |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
This step displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
This example displays a SIP ↔ Microsoft UC On Premises configuration with a KDDI SIP Trunk.
Caption |
---|
|
Image RemovedImage Added |