Page History

The EMS uses the the EMS CALEA user  user role for all LI configuration operations and the admin admin user for communicating over netconf to the SBC. The EMS creates the SBC CALEA user credentials automatically when an SBC registers to the EMS. Distributed SBC instances are registered dynamically in the EMS.

Prerequisites

To configure the CDC for an M-SBC instance:

• Instantiate an EMS SWe instance with LI interface support using an appropriate Heat template. For more information, refer to EMS Standalone Instantiation for Geographical Redundancy (GR) Deployment.
• Ensure that basic M-SBC configuration is completed as in M-SBC Cluster Configuration using SBC Configuration Manager.
• Enable the EMS CALEA user. For information, refer to to Enabling Lawful Intercept on EMS Standalone.

Anchor
Configuring CDC using EMS CALEA User Account Configuring CDC using EMS CALEA User Account

Configuring CDC using the EMS CALEA User Account

For LI, CDC configuration is performed using the CDC Configuration Manager through the EMS. You can create CDC information only when logged in as the EMS CALEA user from the EMS CDC configuration window.

Configure Cluster CDC for M-SBC Nodes

To configure a cluster CDC for M-SBC nodes:

1. Log into EMS as an admin user.

2. Click Network > Cluster Management. The Cluster Management / Manage VNFs window opens listing the SBC clusters created on the EMS.

   Caption
   0 Figure 1 EMS Cluster/VNF List
   Image RemovedImage Added

3. Click the radio button adjacent to the name of the cluster you want to configure. The Details tab for the selected cluster opens by default. 

4. Click the Configurations tab. 

   Caption
   0 Figure 1 Cluster Configurations Tab
   Image RemovedImage Added

5. Launch another EMS session as the CALEA user.
6. Under Monitoring, click Lawful Intercept. The Lawful Intercept window is displayed.

7. Click Cluster CDC. The Lawful Intercept/Cluster CDC window is displayed.

   Caption
   0 Figure 1 Lawful Intercept/Cluster CDC
   Image RemovedImage Added

8. Select the M-SBC cluster.

9. Click Click Launch CDC Configuration Manager. The SBC Configuration Manager window is displayed.

10. Create a call data channel for the M-SBC as described in the following procedure.

Anchor
Creating Call Data Channel for M-SBC Creating Call Data Channel for M-SBC

Creating a Call Data Channel for the M-SBC

The SBC SWe provides the ability to configure the IP address, TCP port, and other parameters used for communication towards the mediation server.

To create a new call data channel:

1. In the SBC Configuration Manager window, navigate to Configuration > Intercept > Call  Configuration > Intercept > Call Data Channel. The Call Data Channel window is displayed.

   Caption
   0 Figure 1 Call Data Channel Window
   Image RemovedImage Added

2. Select default Select default from the Address Context Context drop-down menu. You  You can configure configure LI using the the default Address  Address Context only.

   Caption
   0 Figure 1 Call Data Channel for M-SBC
   Image RemovedImage Added

3. Click Click New Call Data Channel. The Create New Call Data Channel window is displayed.

4. Specify the following values:

   1. Name: Type the name of the call data channel.

   2. Intercept Standard: Select Select packetcable from  from the drop-down menu.

   3. Vendor ID: Select ss8 from  ss8 from the drop-down menu.

   4. RTCP Interception: Select Select Enabled.

   5. Media IP Interface Group Name: Select the name of the media IP interface group you want to use from the drop-down menu.

      Caption
      0 Figure 1 Creating New Call Data Channel
      Image RemovedImage Added

      Caption
      0 Table 1 Creating New Call Data Channel Parameters
      Parameter Description Name Specifies the name of the CDC configuration object. Intercept Standard Specifies the intercept standard to use. Vendor Id Specifies the vendor of the LI server. RTCP Interception Specifies whether to intercept RTCP data. The values are: Disabled (default)  Enabled Media IP interface Group Name Select a Media IP interface Group Name.

5. Click Click Save. 

6. Click Click OK.

7. Click Close at the top-right of the SBC Configuration Manager window.

8. Return to the EMS session containing the SBC Configuration Manager for the OAM node and click Apply Saved Changes and Close.

9.  When prompted, confirm that you want to save and activate your configuration changes.

Creating Mediation Servers

After the call data channel is created, you must create mediation server objects associated with the call data channel. The  The CDC configuration supports up to eight mediation servers.

To create a mediation server object:

1. Navigate to to Configuration >  > Intercept >  > Call Data Channel >  > Mediation Server. The Mediation Server window is displayed.

   Caption
   0 Figure 1 Mediation Server
   Image RemovedImage Added

2. Select Select default from  from the Address Context drop drop-down menu.

3. Select the the Call Data Channel you created for the M-SBC from the drop-down menu.

4. Click Click New Mediation Server. The Create New Mediation Server window is displayed.

5. Type a mediation server name in in Msname.

   Caption
   0 Figure 1 Creating New Mediation Server
   Image RemovedImage Added

6. Click Click Save. The object is created successfully. You can repeat the steps to create up to eight mediation servers for the M-SBC.

Anchor
Mediation Server - Media - TCP Mediation Server - Media - TCP

Mediation Server - Media - TCP

This screen includes the LI Mediation Server TCP Media intercept parameters.

To view TCP parameters:

1. Navigate to Configuration > Intercept > to Configuration > Intercept > Call Data Channel >  > Mediation Server >  > Media >  > TCP. The TCP window is displayed.

   Caption
   0 Figure 1 TCP
   Image RemovedImage Added

2. Select default from the Address Context drop-down menu.

3. Select the Call Data Channel from the drop down menu.

4. Select the Mediation Server from the drop-down menu. The configuration for the selected server opens.

   Caption
   0 Figure 1 Editing TCP - Out of Service
   Image RemovedImage Added

5. Use the following table to configure the server parameters.

   Info
   title Note:
   The mediation server parameters can only be updated when its State is Disabled and Mode is Out Of Service.

   Caption
   0 Table 1 TCP Parameters
   Parameter  Description IP Address V4 or V6 IPV4/IPV6 address of the mediation server for media interception over TCP.   Port Number Specifies the port number of the mediation server for media interception over TCP. Range is 0 - 65535. DSCP Value Specifies the DSCP value for intercepted media packets sent on TCP port. Default value is 16 and range is 0 - 63. Mode Specifies the mode of the TCP connection towards the mediation server for media interception. The options are: In Service Out of service (default) State Specifies the state of the TCP connection towards the mediation server for media interception. The options are: Disabled (default)  Enabled KA Time Specifies the duration between two keep alive transmissions while in idle condition. The default value is 180. KA Interval Specifies the duration between two successive keep alive re-transmissions, if acknowledgement to the previous keep alive transmission is not received. The default value is 30. KA Probe Specifies the number of re-transmissions to be carried out before declaring that the remote end is not available. The default value is 4.

6. Click Click Save.
7. Click Click OK.
8. Enable the mediation server by changing its State to Enabled and Mode to In Service.
9. Click Click Save to  to save the configuration.

10. Click Return to theEMS session containing the SBC Configuration Manager for the OAM node and then click Apply Saved Changes and Close Close.

11. at the top of the SBC Configuration Manager window when you have completed making configuration changes. When prompted, confirm that you want to save and activate your configuration changes. 

Anchor
Viewing Statistics for M-SBC Viewing Statistics for M-SBC

Viewing Statistics for M-SBC 

To view mediation server media statistics:

1. Log onto the EMS as the CALEA user.
2. Under Monitoring, click Lawful Intercept. The Lawful Intercept window is displayed.

3. Click Cluster CDC. The Lawful Intercept/Cluster CDC window is displayed.

4. Select the M-SBC cluster.

5. Click Click View Nodes. The nodes list in the cluster is displayed.

   Caption
   0 Figure 1 View Nodes
   Image RemovedImage Added

6. Select the node to view the mediation server media status and click Launch Node LI Stats. The Mediation Server Media Status window is displayed.

   Caption
   0 Figure 1 Mediation Server Media Status
   Image RemovedImage Added