Page History

...

Overview

...

Prerequisites

• A Lync 2013 deployment with Monitoring Reports fully implemented.
• A

  Spacevars
  0 company

  SBC 1000 or SBC 2000 with an ASM.

...

1. Connect to the Domain Controler through Remote Desktop (RDP) using your regular AD credentials.
2. Launch the Active Directory Users and Computers snap-in.
3. Browse down to Users object (on the left pane).
4. Right-click RTCComponentUniveralServices group and select Properties
5. Click ADD in the the Members tab.
6. In the popup, enter the ASM machine name.

7. Click Check Names.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add to RTCComponentUniversalServices Group

8. Click OK.
9. Click OK to close the properties screen.

...

Adding the ASM QoE Agent ServerMachine Account to the RTCUniversalReadOnlyAdmins Group

...

Step 3: Configure the QoE Agent Server Gateway

...

Info
ASM should have a Lync 2013 SBA image or a Lync 2013 RBA image loaded

1. Configure the ASM IP Settings
2. Join the ASM to a Domain
3. Perform Step 1 (Prepare the SBA). Refer to Deploying the SBA.
4. You need to accept the SIP NOTIFY traffic from the QoE Agent Client Gateway by creating or reusing a signaling group (see Creating and Modifying SIP Signaling Groups) to accept SIP traffic from Client. The listening port will be the port provide in the System tab of the QoE Agent Client Gateways. 
   
5. To configure the QoE service as a Server:
     
   1. In the WebUI, click the Settings tab.

   2. In the left navigation pane, go to System > QoE.

      Panel
      borderStyle none
      Caption 0 Figure 1 Configure QoE Service As Server Image RemovedImage Added

   3. In the QoE Service panel, select Server from the QoE Agent Type list box.
   4. Click Apply.

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > QoE.

   Panel
   borderStyle none
   Caption 0 Figure 1 QoE Service Panel Image RemovedImage Added

3. In the QoE Service panel:
   1. Select Client in the QoE Agent Type list box.
   2. Enter the FQDN or IP address of the QoE Agent Server gateway in the QoE Server Address text field.
   3. Enter the port number for the Sip Signaling Group in the QoE Agent Server Gateway Port text field.
   4. Select the transport protocol from the Protocol list box. If the transport protocol selected is TLS, make sure the QoE Server Address is FQDN (certificate common name is FQDN).
4. Click Apply.

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Signaling Groups > your Lync signaling group.

   Panel
   borderStyle none
   Caption 0 Figure 1 Enable QoE Reporting Image RemovedImage Added

3. In the SIP Channels and Routing Panel, select Enabled from the QoE Reporting list box.
4. Click Apply.

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Media > Media List > your SIP Trunk Media List

   Panel
   borderStyle none
   Caption 0 Figure 1 Enable RTCP-XR Image RemovedImage Added

3. Select RTCP-XR in the RTCP Mode list box
4. Click Apply.

...

Panel
borderStyle none
Caption 0 Figure 1 Verification on QoE Agent Client Gateway Image RemovedImage Added

Note
If more than one signaling are reporting QoE reports, The counters will update on a signaling where the call came in the Gateway.

Pagebreak

QoE Report Verification on the QoE Agent Server Gateway

...