Introduction
This document describes how to determine vCPU and RAM resources required for to determine the VM (Virtual Machine), vCPU, and RAM resources (or a VM instance for cloud-related deployments) required for an
to process planned SIP-based traffic models. Because many deployments are limited due to constraints imposed by existing equipment, it is important to understand and configure your system for media manipulation.Purpose
This document is intended to help partners and customers who employ a VM (Virtual Machine) hosting an instance of the SBC SWe Lite:
deployment to support an enterprise's planned maximum SIP session density. The
session capacity varies in proportion to the vCPU and RAM resources assigned to the VM host; improper assignment of vCPU and RAM resources to a VM may result in being unable to service the required enterprise session workload. Deploying an SBC SWe Lite instance applies to the following:- For an on-premises Microsoft Hyper-V/VMware ESXi/KVM VMM (Virtual Machine Monitor) deployment, identify (for the VM that will host the Identify the number of media sessions requiring manipulation supported by a given vCPU and RAM configuration of an Identify ) the number of vCPU and RAM resources to service a given maximum SIP session density.
- For a Microsoft Azure cloud deployment, identify the required Azure VM provision for an to address a given number of media sessions requiring manipulation
The available
configurations ("Partner Configurator"), which includes a description of embedded features and options, are available behind the partner portal.Definitions and Terminology
- the required maximum SIP session density.
Definitions and Terminology
Term | Definition |
---|
Default RTP Media Manipulation Mode Scenario | A bi- |
Term | Definition |
---|
Default RTP Media Manipulation Mode Scenario | A bi-directional IP-based RTP ↔ RTP media manipulation mode session scenario |
for the is providing G.711 (RTP) ↔ G.729ab (SRTP) transcoding services. This is |
considered as default suggested RTP media manipulation scenario when |
calculating determining a VM's vCPU and RAM resource requirements. |
RTP Media Manipulation |
The action taken by Mode Session | A bi-directional IP-based RTP ↔ RTP media session that receives services from the virtual DSP (Digital Signal Processor) logic within the |
on a bi-directional media session to accomplish some form of intended media manipulation such as . Virual DSP services include translation of media from one codec to another ("transcoding"), encrypting/decrypting media, in-band tone detection, enhanced interoperability, improved user experience, and other media-related services that require direct access to the media flow and information. |
RTP Media Session | A bi-directional flow of audio, video, or other real-time information (such as FAX) between two endpoints that may or may not directly |
subtend
Concepts
and DefinitionsDefinitionDescription
RTP Direct Media Mode Sessions direct media mode sessions do not flow through the
. These flows are common with endpoints that reside within the same physical premises (such as a single branch office) where there is no need for any manipulation of any aspect of the media flow (such as codecs, headers, and encrypting/decrypting). The implications of such sessions on the
are:
- The does not consume any a VM's RAM or vCPU resources processing the RTP direct media mode sessions.; vCPU and RAM resources are consumed for SIP signaling and call processing only.
- PartnersPartners/customers do not need to consider RTP direct media mode sessions when determining an appropriate a VM's vCPU and RAM assignment to resources for a given deployment.
Licensing
The
supports a single media session on a 1:1 basis with an associated SIP signaling session. Note the following:The requires a license to enable a given quantity of SIP signaling sessions.- Multiple direct media mode session streams (audio, video, and so on) may be associated with a given SIP session, and do not require additional licensing unless identified elsewhere.
- Only one mode of media is supported against a given SIP session. For example, one stream of media in direct media mode and one stream of media in RTP proxy media mode, cannot both be associated with the same SIP signaling session.
Licensing
The
supports a single RTP media session on a 1:1 basis with an associated SIP signaling session without further licensing. Specifically:A direct media mode session is supported without any additional licensing beyond the corresponding SIP session license.Multiple direct media mode session streams (audio, video, and so on) may be associated with a given SIP session, and do not require additional licensing unless identified elsewhere.Only one mode of media is supported against a given SIP session. For example, you cannot have one stream of media in direct media mode, one stream of media in RTP proxy media mode, and both associated with the same SIP signaling session.. Note the following:
- The requires a SIP session license to enable a given SIP signaling session. Refer to: SIP Session Licensing.
- Any SIP session license also enables RTP direct media mode session support on a 1:1 basis with an associated SIP signaling session (i.e., no additional licensing beyond the SIP session license is required for RTP direct media mode session support).
Refer to Working with Licenses for a description of available
SIP session licenses that include support for RTP direct media mode session, as follows:- For KVM, VMware, Microsoft Hyper-V on-premises SBC SWe Lite deployments, all SIP session licenses that end with the following characters: -SG, -SGX, -SP
- For Microsoft Azure cloud-based SBC SWe Lite deployments, all SIP session licenses that end with the following characters: -SG
-CLOUD, -SGX-CLOUD, -SP-CLOUD
Description
Refer to Obtaining and Installing a SWe Lite License and Working with Licenses for a description of available
session and feature licenses.DefinitionThese flows are common with endpoints that do not reside within the same physical premises, but do reside within the same enterprise. If these sessions require access to a public SIP trunk (call flows out of the corporate WAN), there may be a need for encryption/decryption and IP address manipulation services, as many . Many public carriers do not support the forwarding of encrypted media or private IP addresses. However, complex media manipulation such as transcoding is not required due to enterprise-wide policies surrounding codec usage being in force. The implications of such sessions on the for these sessions include:
are:The consumes - consumes a VM's RAM and vCPU resources processing the RTP proxy media mode sessions.
- Consumption of RAM and vCPU resources is less than the consumption of RAM and vCPU resources associated with RTP media manipulation mode sessions.
Partners/customers need to consider - RTP proxy media mode sessions must be accessed when determining
an appropriate - a VM's vCPU and RAM
assignment to - resources for a given deployment.
The supports a single RTP - Multiple RTP proxy media mode session streams (audio, video, and so on
a 1:1 basis with an associated SIP interworking session. Note the following regarding RTP proxy media mode sessions:- An RTP proxy media mode session is supported without any additional licensing beyond the corresponding SIP session license if encryption/decryption services are not required. Services the SBC is capable of applying to such media streams include:
- The modification of IP address and other data within the S/RTP, UDP, IP and other header data as provisioned by the user.
- The pass-through of encrypted media traffic (SRTP ↔ SRTP) where no change is required to the previously applied encryption.
- An RTP proxy media mode session requiring encryption/decryption services does require additional licensing beyond the corresponding SIP session license. Encryption/decryption services means:
- An RTP proxy media mode session that requires the SBC support RTP ↔ SRTP conversions.
- An RTP proxy media mode session that requires SRTP ↔ SRTP changes, such as a cipher change, and authentication algorithm change as the media flow transits the SBC.
Other considerations:
- Multiple RTP proxy media mode session streams (audio, video, and so on) may be associated with a given SIP session, and do not require additional licensing unless identified elsewhere.
- Only ONE mode of media is supported against a given SIP session; for example, you cannot have one stream of media in direct media mode, one stream of media in RTP proxy media mode, both associated with the same SIP signaling session.
Refer to Obtaining and Installing a SWe Lite License and Working with Licenses for a description of available
session and feature licenses, including instructions on how to enable RTP proxy encryption/decryption services. Definition
A media session requiring media manipulation is considered a media manipulation mode session. Such flows are common with endpoints that communicate across enterprise and public boundaries. The common call types that require media manipulation services include the following (not an exhaustive list):
Sessions that require transcoding, such as G.711 (common codec in enterprises) ↔ G.729ab (common codec in public networks) translation, G.711 A-law ↔ G.711 µ-law, and so on. Please refer to Protocols and Protocols and Functions Supported for the list of codecs supported by the .Transrating, that is, call legs that carry a different time sample size of media, where the performs the translation. Used often when enterprises or the service provider is looking to save bandwidth by reducing packet count at the expense of voice quality (should a packet be dropped).Silence suppression, where the looks to remove/insert RTP packets carrying no meaningful media, again to save packet traffic;Fax calls.Fax tone detection and interworking to T.38 (T.38 support is available in a future release of the )G.711 fax media pass-through, as DSP intervention reduces the likelihood of in-band fax signaling/media issuesAny call flow where in-band ↔ out-of-band interworking is required. Examples:- ) may be associated with a given SIP session, and do not require additional licensing unless identified elsewhere.
- Only ONE mode of media is supported against a given SIP session. For example, with one stream of media in direct media mode and one stream of media in RTP proxy media mode, both cannot be associated with the same SIP signaling session.
Licensing
The
supports a single RTP proxy media mode session on a 1:1 basis with an associated SIP signaling session. Note the following regarding RTP proxy media mode sessions:- The requires a SIP session license to enable a given SIP signaling session. For more information, refer to: SIP Session Licensing.
- Any SIP session license also enables RTP proxy media mode session support without encryption/decryption services on a 1:1 basis with an associated SIP signaling session (i.e. no additional licensing beyond the SIP session license is required for RTP proxy media mode session support without encryption/decryption services). The SBC applies the following:
- The modification of the IP address and other data within the S/RTP, UDP, IP and other header data as provisioned by the user.
- The pass-through of encrypted media traffic (SRTP ↔ SRTP) where no change is required to the previously applied encryption.
- Select (not all) SIP session licenses also enable RTP proxy media mode session support with encryption/decryption services on a 1:1 basis with an associated SIP signaling session. Encryption/decryption services means:
- An RTP proxy media mode session that requires the SBC to support RTP ↔ SRTP conversions
- An RTP proxy media mode session that requires SRTP ↔ SRTP changes, such as a cipher change and authentication algorithm, change as the media flow transits the SBC.
Refer to Working with Licenses for more information about SIP session licenses that support RTP proxy media mode sessions:
- For SIP sessions requiring no support for encryption/decryption services within the context of RTP proxy media mode sessions:
- KVM, VMware, Microsoft Hyper-V on-premises SBC SWe Lite deployments, all licenses that end with the following characters: -SG, -SGX, -SP
- Microsoft Azure cloud-based SBC SWe Lite deployments, all licenses that end with the following characters: -SG
-CLOUD, -SGX-CLOUD, -SP-CLOUD
- For SIP sessions requiring support for encryption/decryption services within the context of RTP proxy media mode sessions:
- KVM, VMware, Microsoft Hyper-V on-premises SBC SWe Lite deployments, all licenses that end with the following characters: -SGX, -SP
- Microsoft Azure cloud-based SBC SWe Lite deployments, all licenses that end with the following characters: -SGX-CLOUD, -SP-CLOUD
Description
A media session requiring media manipulation is labeled an RTP media manipulation mode session. Such flows are common with endpoints that communicate across enterprise and public boundaries. The
delivers RTP media manipulation services through the application of virtual DSP (Digital Signal Processing) feature to the media session. The media manipulation services delivered by the include:- Transcoding. This includes G.711 (common codec in enterprises) ↔ G.729ab (common codec in public networks) translation, and G.711 A-law ↔ G.711 µ-law. Refer to Protocols and Protocols and Functions Supported for the list of codecs.
- Transrating. Transrating includes call legs that carry a different time sample size of media, where the performs the translation. Transrating is used often when enterprises or the service provider is looking to save bandwidth by reducing packet count at the expense of voice quality (should a packet be dropped).
- Silence suppression. The looks to remove/insert RTP packets carrying no meaningful media to save packet traffic.
- Fax calls.
- Fax tone detection and interworking to T.38
- G.711 fax media pass-through, as DSP intervention reduces the likelihood of in-band fax signaling/media issues
- In-band ↔ out-of-band interworking. Required for the following:
- In-band DTMF tone detection interworking with out-of-band RFC 4733 (supersedes RFC 2833)
- In-band DTMF tone detection interworking with SIP INFO messages
- Interworking RTP dynamic payload types, required when the subtended SBC peers use differing payload type identifiers from the dynamic RTP payload range (for example 96 - 127) to identify a common payload format (in other words, codec)
- Media that originates from the SBC in support of call developments. For example:
- Announcement playback
- Local ringback tone
- Music on Hold
- Comfort noise
- Jitter compensation. Used to maximize user experience with voice quality.
- Certified Skype for Business/Teams Phones and Devices interworking with non-certified endpoints. With virtual DSP intervention, s can address media incompatibility issues between certified Skype for Business Server endpoints (Refer to https://technet.microsoft.com/en-us/office/dn947482) and other SIP-based client endpoints, such as RTCP reporting interval mismatch, and unrecognized in-band supplementary service requests.
The implications of RTP media manipulation mode sessions are the following:
In-band DTMF tone detection interworking with out-of-band RFC 4733 (supersedes RFC 2833)In-band DTMF tone detection interworking with SIP INFO messagesInterworking RTP dynamic payload types, required when the subtended SBC peers use differing payload type identifiers from the dynamic RTP payload range (for example 96 - 127) to identify a common payload format (in other words, codec)Any form of media that originates from the SBC in support of call developments. For example:• Announcement playback• Local ringback tone• Music on Hold• Comfort noiseJitter compensation, to maximize user experience with voice quality.Certified Skype for Business Phones and Devices interworking with non-certified endpoints. With DSP intervention, s can address media incompatibility issues that at first glance may not be apparent between certified Skype for Business Server endpoints (as documented at https://technet.microsoft.com/en-us/office/dn947482) and other SIP-based client endpoints, such as RTCP reporting interval mismatch, and unrecognized in-band supplementary service requests.The implications of media manipulation mode sessions on the
are:- The consumes RAM and vCPU resources processing media manipulation mode sessions.
- Consumption of RAM and vCPU resources is higher than the consumption of RAM and vCPU resources associated with RTP proxy media mode sessions.
- Partners/customers need to consider media manipulation mode session density when determining an appropriate vCPU and RAM assignment to a given .
Media Manipulation Mode Sessions – Licensing
The
supports a single
RTP media manipulation mode session on a 1:1 basis with an associated
SIP signaling session. See below.- The requires a SIP session license to enable a given SIP signaling session.
Note the following regarding licensing implications:- A media manipulation mode session requires additional licensing beyond the corresponding SIP session license. Refer to the section above for an example of services available with a media manipulation mode-related license.
- A media manipulation mode session supports encryption/decryption services. Encryption/decryption services means:
- An RTP proxy media manipulation mode session that requires that the SBC support RTP ↔ SRTP conversions.
- An RTP proxy media manipulation mode session that requires SRTP ↔ SRTP changes, such as a cipher change, authentication algorithm change, and so on as the media flow transits the SBC.
Other considerations:
- Multiple media manipulation mode session streams (such as audio) may be associated with a given SIP session, and do not require additional licensing unless identified elsewhere.
- Only one mode of media is supported against a given SIP session. For example, you cannot have one stream of media in media manipulation mode session mode, one stream of media in RTP proxy media mode, both associated with the same SIP signaling session.
Refer to Obtaining and Installing a SWe Lite License and Working with Licenses for a description of available session and feature licenses, including instructions on how to enable RTP proxy encryption/decryption services. - Refer to SIP Session Licensing.
- Select (not all) SIP session licenses also enable RTP media manipulation mode session support on a 1:1 basis with an associated SIP signaling session.
Refer to Working with Licenses for a description of available
SIP session licenses that include support for RTP media manipulation mode sessions. See below.- For SIP sessions requiring no support for transcoding and/or transrating but support for all other RTP media manipulation services:
- KVM, VMware, Microsoft Hyper-V on-premises SBC SWe Lite deployments, all licenses that end with the following characters: -SGX, -SP, -ME
- Microsoft Azure cloud-based SBC SWe Lite deployments, all licenses that end with the following characters: -SGX-CLOUD, -SP-CLOUD, -ME-CLOUD
- For SIP sessions requiring support for transcoding and/or transrating over and above other RTP media manipulation services:
- KVM, VMware, Microsoft Hyper-V on-premises SBC SWe Lite deployments, all licenses that end with the following characters: -SP, -ME
- Microsoft Azure cloud-based SBC SWe Lite deployments, all licenses that end with the following characters: -SP-CLOUD, -ME-CLOUD
Session Density Map
The table below is a guide to the maximum capacity of an
configured into a VM (Virtual Machine) with a given set of vCPU and RAM resources. The maximum number of the following items vary depending upon a given VM resource profile:
- RTP Media media manipulation mode sessions;
- RTP proxy session mode sessions requiring encryption/decryption services;
- RTP proxy session mode sessions not requiring encryption/decryption services;
- Direct media mode sessions (not presented in the table, but equivalent to RTP proxy session mode sessions not requiring encryption/decryption services;)
- SIP registrations.
Use the table tables below to identify and plan the required resource configuration for a given deployment of an
to address
a partner's/customer's expected SIP traffic flow.
Anchor |
---|
| SessionDensityMap |
---|
| SessionDensityMap |
---|
|
Div |
---|
|
Caption |
---|
0 | Table |
---|
1 | Session Density Map |
---|
|
SWe Lite Virtual Machine Resources, applicable to all supported hypervisors (KVM, VMware®) | Maximum SIP with corresponding RTP Sessions | SIP Signaling Sessions | RTP Media Sessions | |
RTP Media Manipulation Mode (transcode, in-band services, encryption, and other services) | RTP Proxy Media Mode | Video Streams² |
vCPU # | GiB RAM | Maximum TCP/TLS-based SIP Signaling Sessions | Maximum SIP Registrations (60 minute refresh rate) | Multiexcerpt include |
---|
MultiExcerptName | Performance |
---|
PageWithExcerpt | SBC SWe Lite Performance and Capacity |
---|
|
Multiexcerpt include |
---|
MultiExcerptName | Transcoding - For KVM, VMWare and Microsoft Hyper-V |
---|
PageWithExcerpt | SBC SWe Lite Performance and Capacity |
---|
|
Multiexcerpt include |
---|
MultiExcerptName | Transcoding - For Azure |
---|
PageWithExcerpt | SBC SWe Lite Performance and Capacity |
---|
|
Process to Determine VM Resources
Identify and record the minimum quantity of VM resources to support your maximum default RTP media manipulation mode sessions:
For an on-premises deployment, refer to Table 1 and record the required minimum quantity of vCPUs and RAM found in the vCPU # and GB RAM column that supports a number of default RTP media manipulation mode sessions greater or equal to your deployment need; note the number of supported default RTP media manipulation mode sessions is found in the Default
No transcode, with in-band services scenarioDefault transcode scenario: G.711/G.729ab RTP ↔ G.729ab/G.
711 SRTP711SRTP, with in-band services
Complex transcode scenario: G.7xx RTP ↔ G.7xx SRTP, with in-band services¹ | Encryption services: G.711 RTP ↔ G.711 SRTP, with or without RTP/UDP/IP header changes | No encryption services: RTP proxy media mode, including RTP↔RTP, SRTP↔SRTP, with or without RTP/UDP/IP header changes | column.
For an Microsoft Azure-based
deployment, refer to Table 2 and record the required minimum Azure VM instance type found in the VM instance column that supports a number of default RTP media manipulation mode sessions greater or equal to your deployment need; note the number of supported default RTP media manipulation mode sessions is found in the Default scenario: G.711/G.729ab RTP ↔ G.729ab/G.711SRTP, with in-band services column. Warning |
---|
title | Use of Table 3 for non-default RTP media manipulation mode sessions |
---|
|
If on-premises deployment is required to support a transcoding scenario other than G.711 ↔ G.729ab (the default RTP media manipulation mode session scenario), use Table 3 to identify the required minimum quantity of vCPUs to assign to the VM. For example, support for 50 G.711 ↔ OPUS sessions requires 2 vCPUs. The 2 vCPU figure should be used when undertaking step 2(a). |
Identify and record the minimum quantity of VM resources to support the additional RTP proxy session mode sessions (beyond the maximum default RTP media manipulation mode sessions) for your
deployment. Warning |
---|
title | Calculating the maximum available RTP proxy mode sessions for your VM resource |
---|
|
The maximum available RTP proxy session mode session capacity is not equal to a value found in the Maximum SIP with corresponding RTP Media Sessions column in Tables 1 or 2; rather, it is determined by subtracting the maximum default RTP media manipulation mode sessions identified in Step 1 from the Maximum SIP with corresponding RTP Media Sessions column value associated with the quantity of vCPUs and RAM recorded from Step 1. |
Step | Action |
---|
a | For an on-premises deployment, refer to Table 1 and calculate |
1 | 1 GiB | 100 | 100 | 1,000 | 50 | 50 | 50 | 100 | 100 | 25 |
2 | 1.5 GiB | 1,000 | 1,000 | 5,000 | 100 | 100 | 100 | 1,000 | 1,000 | 50 |
4 | 2.5 GiB | 1,000 | 1,000 | 5,000 | 300 | 300 | 300 | 1,000 | 1,000 | 100 |
¹G.722 (AMR) reduces values by 30%.
²SWe Lite supports 25 video streams per vCPU to a maximum of 100 streams. Exceeding 4 vCPUs do not allow more than 100 video streams.
How to Determine vCPU and RAM Requirements
Follow these steps to determine the number of vCPUs and RAM required for your deployment.
Determine the number of RTP media manipulation mode sessions needed (taking into account future growth): From Table 3, identify the required minimum quantity of vCPUs and RAM to address your required capacity, and then record the values.
Determine the additional RTP proxy session mode sessions requiring encryption/decryption services for your
deployment (taking into account future growth):Step | Action |
---|
a | From Table 3, identify the maximum available RTP proxy session mode session capacity |
( encryption/decryption services) available with of of vCPUs and RAM recorded from Step 1 |
.b | (or Step 2 (b)). For an Microsoft Azure-based deployment, refer to Table 2 and calculate |
Determine if the maximum available RTP proxy session |
capacity from (a) above is larger than your required capacity of additional RTP proxy session mode sessions requiring encryption/decryption services:If... | Then |
---|
Capacity from (a) is larger | Proceed to step 3, using the quantity of vCPUs and RAM determined from point 1 above. |
Capacity from (a) is smaller | Review Table 3 and increase the quantity of vCPUs and RAM until you arrive at a quantity of both that supports an RTP proxy session capacity (with encryption/decryption services) equal to/greater than your required number of sessions. Record these values. |
Determine the additional RTP proxy session mode sessions not requiring encryption/decryption services for your deployment (taking into account future growth):
Step | Action |
---|
a | From Table 3, identify the total number of RTP media sessions available with the quantity of vCPUs and RAM recorded from point 2(a) or 2(b) above. This value can be found in the Maximum SIP with corresponding RTP Sessions column. |
b | Add the number of required RTP media manipulation mode sessions and RTP proxy session mode sessions requiring encryption/decryption services and record the value. |
c | Subtract the value recorded in 3(b) from the value recorded in 3(a). |
mode session capacity with the Azure VM instance type recorded from Step 1 (or Step 2(b)). |
b | Identify if the calculated maximum available RTP proxy session capacity from (a) above is larger than your required additional RTP proxy session mode sessions: If... | Then |
---|
Calculated capacity from 2 (a) is larger than required RTP proxy session mode sessions | Proceed to step 3, using the quantity of vCPUs and RAM determined from point 2(a) above. | Calculated capacity from 2 (a) is smaller than required RTP proxy session mode sessions | Review Table 1 (or Table 2 for an Azure-based deployment) and increase the quantity of vCPUs and RAM (or upgrade to a more powerful) Azure VM, then re-execute step 2(a). |
|
- Prepare to configure your with the resources arrived at the end of step 2.
d | Determine if the value in (c) above is greater than/equal to the required additional RTP proxy session mode sessions not requiring encryption/decryption services for your For an on-premises
- deployment
. If... | Then |
---|
The value in (c) above is greater than/equal to | Proceed to step 4, using the quantity of vCPUs and RAM determined from point 3(a) above. |
The value in (c) above is less than | Review Table 3 and increase the quantity of vCPUs and RAM and repeat steps 3(a) through 3(c) until you arrive at a quantity of both that supports an overall session capacity greater than your total required number of sessions across all modes. Record these vCPU and RAM values. |
- Prepare to configure your with the required number of vCPUs and RAM by referring to Configuring the SBC Edge and SBC SWe Lite.
Examples
Calculating the vCPU and RAM Resource Requirements for a Low-Density
Deployment1. I need 15 RTP media manipulation mode sessions (sessions is equivalent to the Default Media Manipulation Scenario defined above). From Table 3 I see a single vCPU and 1 GiB of RAM supports this capacity. I record these values as the potential number of vCPU and RAM resources to assign to my , refer Installing SBC SWe Lite.
- For an Microsoft Azure-based deployment, refer to Running a SWe Lite via Microsoft Azure Marketplace.
Examples
Info |
---|
For details on the numbers used for calculations, see the Transcoding and Call Performance tables above. |
Calculating a VM's vCPU and RAM Resource Requirements for an On-premises Low-Density KVM-based
Deployment- Fifty (50) RTP media manipulation mode sessions are required (a session is equivalent to the Default RTP Media Manipulation Scenario defined above).
- A single vCPU and 1 GiB of RAM is the minimal vCPU and RAM count that supports this number of RTP media manipulation sessions.
- Record these values as the potential number of vCPU and RAM resources to assign to the VM hosting the .
- One hundred (100) additional RTP proxy session mode sessions services are required.
- A single vCPU and 1 GiB of RAM supports a maximum of 300 total SIP with corresponding RTP sessions. Subtract the 50 RTP media manipulation mode sessions from the 300 and there are 250 remaining sessions.
- 250 sessions is greater than the 100 additional RTP proxy session mode sessions; run concurrent to the 50 RTP media manipulation mode sessions, and use the 1 vCPU and 1 GiB RAM resources identified from point 1.
- Refer to the Installing SBC SWe Lite on KVM Hypervisor to configure a VM with 1 vCPU and 1 GiB RAM to host the .
Identifying the Microsoft Azure VM Instance for a Cloud-based
.2. I need 35 additional RTP proxy session mode sessions requiring encryption/decryption services. From Table 3 I see a single vCPU and 1 GiB of RAM supports up to 100 RTP proxy session mode sessions requiring encryption/decryption services I continue to use the number of vCPU and RAM resources from point 1 to assign to my .3. I need 50 additional RTP proxy session mode sessions not requiring encryption/decryption services. Deployment
(a) From Table 3, I see a single vCPU and 1 GiB of RAM supports a maximum of 100 total sessions.(b) The sum from adding the required media manipulation mode sessions plus RTP proxy session mode sessions requiring encryption/decryption services is 50.(c) The difference from subtracting 3(b) from 3( a) results in 50 sessions.(d) As 3(c) is equal to the 50 RTP proxy session mode sessions not requiring encryption/decryption services, I continue to use the number of vCPU and RAM resources determined from point 2 above to assign to my - 200 RTP media manipulation mode sessions that support G.711 ↔ G.729ab transcoding are required.
- The F2s VM supports this capacity of the default RTP media manipulation sessions.
- Record the F2s value as the potential Azure VM that will host the .
2. 800 additional RTP proxy session mode sessions are required.
- The F2s VM supports 1000 SIP with corresponding RTP media sessions.
- Subtract the 200 RTP media manipulation mode sessions from the 1000, and 800 sessions remain.
- Record the F2s VM instance as the 800 sessions determined previously is equal to the 800 additional RTP proxy session mode sessions required to run concurrent to the 200 RTP media manipulation mode sessions.
3. Refer to Running a SWe Lite via Microsoft Azure Marketplace to start an F2s VM hosting the
- .
Calculating the vCPU and RAM Resource Requirements for
a High-Density Deployment1. I need 100 RTP media manipulation mode sessions (sessions is equivalent to the RTP Default Media Manipulation Scenario defined above). From Table 3, I see 2 vCPU and 1.5 GiB of RAM supports this capacity. I record these values as the potential number of vCPU and RAM resources to assign to my an On-premises High-Density Hyper-V based
2. I need 400 additional RTP proxy session mode sessions requiring encryption/decryption services. From Table 3, I see 2 vCPU and 1.5 GiB of RAM supports up to 1,000 RTP proxy session mode sessions requiring encryption/decryption services alongside a maximum of 100 Deployment- 200 RTP media manipulation mode sessions
. I continue to use the - are required to support G.711 ↔ AMR WB transcoding.
- 4 vCPU supports this capacity.
- Record the 4 vCPU value as the potential number of vCPU
and RAM
from point 1
my - the VM that will host (under Hyper-V) the .
- Note the required RAM will be determined in the next step.
2. 800
3. I need 500 additional RTP proxy session mode sessions
not requiring with encryption/decryption services.
(a)
3
2
1
up to 1,000 total sessions.- 1000 SIP with corresponding RTP media sessions are required.
- Subtract the 200 RTP
(b) The sum of adding the required - media manipulation mode sessions
and RTP proxy session mode sessions requiring encryption/decryption services is 500.(c) The difference from subtracting 3( b) from 3(a) is 500 sessions.
(d) As 3(c) is equal to the 500 RTP proxy session mode sessions not requiring encryption/decryption services, I continue to use the number of vCPU and RAM resources (2 vCPUs, 1.5 GiB RAM) determined from point 2 above to assign to my - from the 1000, and 800 sessions remain.
- Record the 4 vCPU and 2.5 GiB RAM figures; the 800 session figure determined previously is equal to the 800 additional RTP proxy session mode sessions required to run concurrent to the 200 RTP media manipulation mode sessions.
3. Refer to Hyper-V installation guide to begin the process of instantiating a VM with 1 vCPU and 1 GiB RAM to host the
.
Calculating the vCPU and RAM Resource Requirements for a High-Density SIP Registration
DeploymentThe required vCPU and RAM for a high capacity SIP Registration deployment are relatively simple: if the number of SIP registrations exceeds 1,000 endpoints, please configure the VM with a minimum of 4 vCPUs and 2.5 GiB RAM. If less/equal to 1,000, the RAM is defined by the required session capacity.
SIP Signaling Group Considerations
SIP Signaling groups (provisioning constructs that represent a connection between the
and another SIP based peer) can be configured to use either
RTP media manipulation session mode or a RTP proxy session mode.
Note the followingSee below:
- Preference can be set so that either media manipulation session mode or RTP proxy session mode is preferred, but not required.
- If RTP proxy session mode is configured as preferred by both signaling groups, the call proceeds using RTP proxy session mode.
- If media manipulation session mode is configured as preferred by both signaling groups, the call proceeds in media manipulation session mode.
- If one signaling group is configured as media manipulation session mode preferred, and the other signaling group is configured as RTP proxy session mode preferred, the selection of mode is based on the preference of the signaling group associated with the party initiating the call. If media manipulation session mode is preferred but there is no available resource for the initiating party, the initiating party falls back to attempt the call using RTP proxy session mode.
- After a media path is established between the SIP client and the in either media manipulation session mode or RTP proxy session mode, there is no support for a mid-call dynamic switch to change mode – this includes the case of call transfer and conference. This is not necessarily a limitation – it simply emphasizes the importance of understanding the network deployment/architecture. It simply means that the network deployment/architecture needs to be understood.
- If media manipulation session mode is preferred but not required, and if the other signaling group is configured for RTP proxy session mode only, the call goes through using RTP proxy session mode. This improves preservation of the media manipulation session mode resource for calls which require the resources most. However, keep in mind that there is no support for a A mid-call dynamic switch to change mode, including the case of call transfer and conference is not supported. This is not necessarily a limitation. This also emphasizes the importance of understanding the network deployment/architecture.
- If media manipulation session mode is either required or preferred and a RTP proxy session mode route is not possible, the must have an available media manipulation session mode resource – otherwiseresource. Otherwise, the call will fail.
Considerations for DTMF
There are several alternatives for DTMF calls:
- When a DTMF call is received, the terminates the call and transmits G.711. Other codec types may also be used. However, types such as G.723.1 may be less reliable.
- When a DTMF call is received, the terminates the call and transmits the signals as out-of-band RFC 2833/4733 compliant messages or out-of-band SIP INFO messages.
- A signaling group can be provisioned to transmit in-band signals as voice, RFC 2833/4733, or SIP INFO messages. There is no fall-back function.
- In the case of RTP proxy session mode, the does not process the DTMF.
Considerations for Video Interworking
in Non-DSP ModeThe SBC SWe Lite supports 25 video streams per vCPU to a maximum of 100 streams. Exceeding 4 vCPUs does not allow more than 100 video streams.