Page History

In This Section...

Overview — Configure the

Spacevars
0 product

 for On-Premise PBX Integration With Skype for Business

...

1.  Login to the

   Spacevars
   0 product

    WebUI and navigate to Node Level Settings.
2. Configure the

   Spacevars
   0 product

    host name, domain suffix, and the DNS IP address:

Verifying Certificates on the 

Spacevars
0 product

1. Login to the

   Spacevars
   0 product

    WebUI and navigate to Security > SBC Certificates.
2. Verify that the Trusted CA Certificate and Sonus Ribbon Certificates are installed:.

...

...

...

Caption
0 Figure 1 Certificates
Image Removed

...

Creating Contact Registrant Table Entries

Create entries for OnPrem users (in this example they are associated to FXS endpoints). These entries must match with the Skype for Business users' SIP and tel: URI values. 

1. Login to the

   Spacevars
   0 product

    WebUI and navigate to SIP > Contact Registrant Table.
2. Create a new table.
3. Create Contact Registrant Table entries as shown below. Make sure that highlighted values are correspondingly entered . Ensure the Address of Record URI and SIP Contacts correspond to the entries with the SIP and tel: URI values in SFB database.

...

...

...

...

Creating a CAS FXS Profile

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to CAS >CAS Signaling Profiles.
2. Create an FXS profile with configuration as shown below:

Creating an FXS to SfB Transformation Table

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Transformation.
2. Create a Transformation Table with a desired number transformation entry as shown below.

...

1. . For example: a transformation table entry that will translate the 11-digit 15101221201 called number from FXS endpoints to +15101221201.

Creating an FXS to SfB Call Routing Table

Creating an FXS to SfB Call Routing Table

1. Login to the 

   Spacevars
   0

   Login to the 

   Spacevars
   0 product

    WebUI and navigate to Call Routing Table.
2. Create a table as shown belowroute between an FXS to SfB.  For details on call routing, refer to Creating and Modifying Entries to Call Routing Tables.

Creating a CAS Creating a CAS FXS Signaling Group

1. Login to the

   Spacevars
   0 product

    WebUI and navigate to Signaling Groups.
2. Create a CAS FXS Signaling Group by applying the above call route and fxs profile as shown belowFXS profile. For details on Signaling Groups, refer to Creating and Modifying SIP Signaling Groups.

...

Creating an

Spacevars

...

0

...

Image Removed

product

 to FXS Transformation

Creating an

Spacevars
0 product

 to FXS Transformation Table

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to Transformation.
2. Create a Transformation Table with a desired number transformation entry as shown below.

Panel
borderStyle none
Caption 0 Figure 1 Creating an SBC to FXS Transformation Table Image Removed

Creating an SfB to FXS Call Routing Table

1.  Login to the

   Spacevars
   0 product

    WebUI and navigate to Call Routing Table.
2. Create a table as shown belowCall  Routing Table that includes the Number/Name Translation Table created above.

Creating

...

Image Removed

Creating a Mediation Crypto Profile

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to Media > Media Crypto Profiles.
2. Create a Mediation Crypto profile as shown below.

...

1. . For details, refer to Managing SDES-SRTP Profiles.

Creating a Mediation List

1. Login to the

   Spacevars

...

1. 0

...

Image Removed

1. product

    WebUI

Creating a Mediation List

1. Login to the

   Spacevars
   0 product

    WebUI and navigate to Media > Media List.
2. Create a Mediation List as shown below. Make sure Ensure to apply the Crypto Profile because it is needed by SFB calls.

...

...

...

 Creating a SIP Signaling Profile

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > SIP Profiles.
2. Create a SIP Profile as shown below.

...

1. . For details, refer to Creating and Modifying SIP Profiles.

 Creating a SIP Server Table

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > SIP Server Tables. Refer to Creating and Modifying Entries in SIP Server Tables.
2. Create a SIP Server Table as shown below.

Image Removed

Creating a SIP Signaling Group

...

1. Apply the previously created SIP Profile, Media List, Call Routing Table, and SIP Server Table entries to this Signaling Group. In addition, set the inter-op mode as Office 365, and ensure that the Office 365 FQDN matches the dns suffix used in SfB user's profile.

Panel
borderStyle none
Caption 0 Figure 1 Creating a SIP Signaling Group Image Removed

Pagebreak

o365 with AD

Anchor
o365 with AD o365 with AD

...

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to CAS >CAS Signaling Profiles.
2. Create an FXS profile as shown below.

...

1. . Refer to Creating and Modifying CAS Signaling Groups.

Creating an FXS to SfB Transformation Table

1. Login to the 

   Spacevars
   0 product

   C WebUI and navigate to Transformation.
2. Create a Transformation Table with a desired number transformation entry as shown below.

...

1. . For example, a transformation table entry

...

1. can translate 11 digit 15101221201 called number from FXS endpoints to +15101221201.

Creating an FXS to SfB Call Routing Table

1. Login to 

   Spacevars
   0 product

    WebUI and navigate to Call Routing Table.
2. Create a table as shown belowrouting table. Ensure the Number/Name Tranformation Table created in the earlier step is added.

Creating an FXS Signaling Group

Creating an FXS Signaling Group

1. Login to the 

   Spacevars
   0

   Login to the 

   Spacevars
   0 product

    WebUI and navigate to Signaling Groups.
2. Create a CAS FXS Signaling Group by applying the above call route and FXS profile as shown below.

Creating an

Spacevars
0

...

Image Removed

product

 to FXS Transformation Table

Creating an

Spacevars
0 product

 to FXS Transformation Table

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Transformation.
2. Create a Transformation Table with a desired number transformation entry as shown below.

...

1. . For example, this transformation table entry

...

1. can translate tel: URI number +15101221201 called number from the

   Spacevars
   0 product

   to a 4-digit extension number that was used in CAS signaling group numbers such as 1201.

Creating an SfB to FXS Call Routing Table

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Call Routing Table.
2. Create a call routing table as shown below.. Ensure the Number/Name Translation Table created previously is selected.

Creating

...

Image Removed

Creating a Mediation Crypto Profile

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Media > Media Crypto Profiles.
2. Create a Mediation Crypto Profile as shown below:.

...

Creating a Mediation List

1.  Login to the 

   Spacevars

...

1. 0

...

Image Removed

1. product

    WebUI and

Creating a Mediation List

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Media > Media List.
2. Create a Mediation List as shown below. Make sure to apply the Crypto Profile because it is needed by SfB calls.

...

...

Creating a SIP Signaling Profile

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > SIP Profiles.
2. Create a SIP Profile as shown below.

1. . Refer to Creating and Modifying SIP Profiles.

Creating a SIP Creating a SIP Server Table

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > SIP Server Tables.
2. Create a SIP Server Table as shown below. Refer to Creating and Modifying Entries in SIP Server Tables.

...

 Domain Controller and Active Directory

...

1. Domain Controller with relevant search scope for the OnPrem Users.
2. Active Directory Configuration with relevant user attributes.

In this case, we use the pager attribute is used  to query and to register the user with it. Make sure to have Ensure the AD user created with the pager attribute as shown below:

...

Creating a SIP Signaling Group

...

Note that previously created SIP Profile, Media List, Call Routing Table, and the SIP Server Table entries are applied to this Signaling Group. In addition, the inter-op mode is set as Office 365 w/AD PBX, AD Attribute as pager, and the Office 365 FQDN is matching with the dns suffix that is used in SFB user's profile.

...

pagebreak

o365 with CRT and AD

Anchor
o365 with CRT and AD o365 with CRT and AD

...

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > Contact Registrant Table.
2. Create a new table.
3. Create the relevant Contact Registrant Table Entries as shown below; make sure that highlighted values are accordingly entered with . Ensure the Address of Record URI and SIP Contacts match the SIP and tel: URI values in SFB database.

...

Creating a CAS FXS Profile

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to CAS >CAS Signaling Profiles.
2. Create an FXS profile as shown below.

...

...

1. >CAS Signaling Profiles.
2. Create an FXS profile. Refer to Creating and Modifying CAS Signaling Groups.

...

Creating an FXS to SfB Transformation Table 

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to Transformation.
2. Create a Transformation Table with a desired number transformation entry as shown below.

Creating an FXS to SfB Call Routing Table

1. Login to 

   Spacevars
   0 product

    WebUI and navigate to Call Routing Table.
2. Create a table as shown belowCall Routing Table. Refer to Creating and Modifying Entries to Call Routing Tables.

...

Creating an FXS Signaling Group

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to Signaling Groups.
2. Create a CAS FXS Signaling Group by applying the above call route and FXS profile as shown below.

Creating an

Spacevars
0 product

 to FXS Transformation Table

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Transformation.
2. Create a Transformation Table with a desired number transformation entry as shown below.

Creating an SfB to FXS Call Routing Table

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Call Routing Table.
2. Create a call routing table as shown below.

Creating a Mediation Crypto Profile

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Media > Media Crypto Profiles.
2. Create a Mediation Crypto Profile as shown below:

...

1. Spacevars

...

1. 0

...

Image Removed

1. product

    WebUI and navigate to Media > Media Crypto Profiles.
2. Create a Mediation Crypto Profile. For details, refer to Creating and Modifying SDES-SRTP Profiles.

...

Creating a Mediation List

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to Media > Media List.
2. Create a Mediation List as shown below. Make sure to apply the Crypto Profile because it is needed by SfB calls.

1. is needed by SfB calls.

Creating a SIP Signaling Profile

1.  Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > SIP Profiles.
2. Create a SIP Profile as shown below.

...

...

Creating a SIP

...

Image Removed

Creating a SIP Server Table

1. Login to the 

   Spacevars
   0 product

    WebUI and navigate to SIP > SIP Server Tables.
2. Create a SIP Server Table as shown below.

...

Domain Controller and AD

If inter-op Mode will be used as o365 with AD PBX, the following configuration steps must be completed.

1. Domain Controller with relevant search scope for the OnPrem users.
2. Active Directory Configuration with relevant user attributes.

...

...

...

In this case, the pager attribute is used to query and register the user. Make sure to have the AD user created with the pager attribute as shown below:

Panel
borderStyle none
Caption 0 Figure 1 Pager Attribute

pagebreak 

Configuring a SIP Signaling Group

Signaling Group is configured with interop mode as Office 365 w/AD PBX and AD attribute as pager (for this exercise).

as pager (for this exercise).

Enabling ICE Support for MS SfB EDGE Server Integration

...

1. Remote Authorization Table Entry with the Realm of SfB's domain suffix, a valid domain user, and its credentials as shown below.
2. SIP Server Table with the FQDN of the EDGE Server, Port 5062, protocol as TLS, the TLS profile that is used for SfB Front End Pool integration, and the Remote Authorization Table entry that is created in the previous step as shown below.
   
3. Node Level SIP Settings that is configured with the EDGE SIP Server table (from the previous step) as EDGE Server Destination settings as shown below.
4. Front End Pool SIP Signaling Group configured with ICE Support settings as enabled as shown below:

...

1. .

...

 Image Removed

Image Removed

 Image Removed

...