Page History

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a0c87a8bc654017a90dcbbab0002, userName='null'}
JIRAIDAUTH	TP-626
REV5	UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7ea6e836000d, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7ea6e836000d, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a0c86d32712b016d406f77af0008, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a0c8652ba79201656dbe5f14001b, userName='null'}
REV2	UserResourceIdentifier{userKey=8a00a0c8601a1bc701602339d1190006, userName='null'}

Panel

In this section:

Table of Contents

This section describes the steps to enable the transparent mode support for registering clients, using B2BUA.

Configure the VoIP Settings

Configure the system’s VoIP settings.

Caption

0	Table
1	Configuring VoIP Parameters
3	Configuring VoIP Parameters

Parameter	Example Configuration Value
Enable LLDP	Enabled (default)
LLDP Broadcast Interval (sec)	30 (default)
TFTP Server IP Address	Disabled
Use ALG Alias IP Addresses	Disabled
Do Strict RTP Source Check	Disabled
Enable Client List Lockdown	Disabled
Allow Shared Usernames	Disabled
Strip G.729 from Calls	Disabled
Route all SIP Signalling Through B2BUA	Enabled
Enable Microsoft Feature	Disabled
Enable Comfort Noise Generation (CNG)	Disabled
Enable User-Agent Header Pass-Through	Disabled
Enable SRTP Support	Disabled
Enable MKI Support	Disabled Note: This is optional. This depends on whether or not MKI support is enabled on MS Teams.
H.225/H.245 Port Range	14085-15084 (default)
RTP Port Range	16386-18385 (default)
RTP Packetization Time (ms)	20
Prioritize Microsoft Teams	Not Required for MS Team. The system will automatically prioritize signaling and media. This setting is used when the system is “NATing” MS Teams traffic.
Calculate RTT	Enabled (default)

Select VoIP > SIP from the Configuration Menu on the left-hand side.

Configure the SIP Server Settings for the B2BUA transparent mode support.

Caption

0	Table
1	Configuring SIP Server Settings Parameters
3	Configuring SIP Server Settings

Parameter		Example Configuration Value
SIP Server Address		siptrunk.domain.com
SIP Server Port		5060 (Verify with your SIP trunking provider which SIP port to configure.) Note: If the FQDN resolves to a different port for the SIP Server Address the system will use the port returned in the DNS query response.
SIP Server Transport		UDP
Enable SRTP		Disabled
Use Custom Domain		Enabled
SIP Server Domain		sipserver.domain.com
List of SIP Servers		None
Load Balancing (Round Robin)		Enabled
Enable Multi-homed Outbound Proxy Mode		Disabled
Enable Transparent Proxy Mode		Disabled
Limit Outbound to Listed SIP Servers		Enabled
Limit Inbound to Listed SIP Servers		Enabled
Dynamic List of SIP Proxies support		Disabled
Include UPDATE in Allow		Enabled
PRACK Support		Enabled
GEOLOCATION Support		Disabled
Call Audit Support		Disabled
Enable Sub Domain Pass through support		Disabled
Enable P-Associated-URI support		Disabled
SIP Use New Port on Hold Resume		Enabled
State client time(m)		1440
List of Allowed SIP servers
SIP Server Address/FQDN		None
Transport		UDP
Action		None
SDP Modifications
SDP Codec Operation		No action
SDP Section that will be modified		Disabled
Codecs (Comma separated list)		Disabled
Reject when No match Codec		Disabled
Strip Matched Expressions for Request		None
Strip Matched Expressions for Response		None
Priority Numbers
Priority Number 1: Priority Number 2: Priority Number 3: Priority Number 4:		Not set