Page History

...

1. Connect to the Azure portal. Refer to portal.azure.com.

2. From the menu, click Create a Resource.

3. In the search bar, enter Ribbon and click <Enter>. From the selections, click on

   Spacevars
   0 series3

   .
   

   Image Modified

   
   

4. Review the product description and click Create.
   

   Image Modified

   
   

5. In the Basics tab, configure the fields as described below.

6. From the Resource group drop down list in the left side menu, select the Resource Group created previously (i.e., SWeLite-RG)

   Info
   To view recommended VM sizes, refer to Virtual Machine Requirements - Microsoft Azure.

   
   

7. In Virtual machine name field, enter SWeLite.

8. In Size, click Change size to select the applicable VM size. To determine the required VM size, refer to Calculating Virtual Machine Requirements for an SBC SWe Edge Supported VM sizes include:

   1. B1ms

   2. B2s

   3. DS1_v2

   4. DS3_v2

9. In Authentication Type, click on Password.

10. Enter Username, Password, and Confirm Password.
    
    

    Image Modified

    
    

11. Click Next: Disks.

12. From OS disk type drop down list, select Premium SSD.

    Image Modified

    
    

13. Click Next: Networking.

14. Review and verify the default fields.
    
    

    Image Modified

    
    

15.  Click Review + Create.

16. A screen indicates validation of the VM has passed.

    Image Modified

    
    

17. Click Create. A VM status is displayed.

    Image Modified

    
    When finished, this message is displayed: Your deployment is complete.

    
    

18. From the main menu, select Virtual Machines. The newly created 

    Spacevars
    0 series3

    instance is displayed.
    
    

    Image Modified

    
    

...

1. Connect to the Azure portal. Refer to portal.azure.com.
2. From the menu, select Virtual Machines
3. From the list of VMs, click the check box next to the desired 

   Spacevars
   0 series3

   VM.

4. From the main menu select Stop and then Yes to acknowledge stopping the VM. Wait for the VM status to be Stopped (Deallocated), which can sometimes take takes a few minutes. Alternatively, right-click on the desired VM and select Stop.

   

   
   

5. Click on the desired VM to view the settings.
6. From Settings > Networking, click Attach network interface.

7. Click Create network interface.
   
   

   

   
   

8. In the Create network interface window, enter the required information. Ensure you enter the signaling subnet address configured previously.
   
   

   

   
   

9. Click Create.

10. Click Attach network interface and select the newly created Network Interface. Click OK.
    
    

    

    
    

11. Confirm that your VM has two NICs.

    Image Modified

    
    

12. From  the list of VMs, select the 

    Spacevars
    0 series3

    VM.
13. From the main menu select Start (alternatively, right-click on the desired VM and select Start).

...