Page History
Tone tables allow the
| Spacevars | ||
|---|---|---|
|
| Info |
|---|
A maximum of eight Tone Tables is permitted in the system. |
| Note | ||||
|---|---|---|---|---|
For Do not configure a ringback or congestion tone with frequencies greater than 1KHz when also setting for "continuous" (as opposed to Cadence). |
To create or modify an Entry to a Tone Table:
- In the WebUI, click the Settings tab.
In the left navigation pane, click Tone Tables > Default Tone Table.
Default Tone Table (SBC 1000 / 2000)
Default Tone Table (SBC SWe Edge)
Pagebreak Click the expand (
) icon.
Tone Tables - Field Definitions
Frequency 1 and Frequency 2
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the frequency in Hertz.
|
Frequency 2 is optional| Pagebreak |
|---|
Amplitude 1 and Amplitude 2
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the amplitude in decibels per milliwatt (dBm) for Frequency 1 and Frequency 2.
|
Continuous Tone
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies whether to use a continuous tone or a cadence. |
Cadence On
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the duration of time, in milliseconds, that the tone is on. Available only when Continuous Tone is set to Cadence. |
Cadence Off
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the duration of time, in milliseconds, that the tone is off. Available only when Continuous Tone is set to Cadence. |
Double Cadence
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies that the tone is used in a double cadence form. This only applies to POTS fixed phones, where the high voltage ring signal is switched on and off to create the ringing pattern. In North America, the standard ring cadence is "2-4", or 2000 ms followed by 4000 ms of silence (default
|
Overview
Content Tools