Page History

The Credentials and Registration window configures authentication credentials and specifications for registering Address of Records (AORs).  

1. Choose VoIP > SIP > B2BUA.

2. Scroll to the Credentials and Registration window. If necessary, click New Entry to open the new credentials and registrar entry window.
   Image Modified

   
   

3. Configure settings using the information in the following table as a guide. When you have finished configuring settings, click Update to make your changes take effect.

   Caption
   0 Table 1 B2BUA Credentials and Registration Configuration Parameters
   Item Description Credentials and Registration Displays a list of registered AORs. Refer to Manage B2BUA Credentials and Registration. AOR Displays the Address of Record or Username. The values in this column can be one of the following: • Username—If the entry is an Authentication credential or the registrar is the default proxy, this column displays the Username, for example, 2408881028. • SIP URI—If the entry is for registering an AOR to the non-default proxy, full SIP URI is displayed. For example, sip:1234567890@sipdomain.com. Where “sipdomain.com” is the domain name of the registrar. • Default—For default or wild card credentials. Auth-User Displays the authentication user. If the field is blank, the authentication user is the same as the Username. The AOR Auth-User field supports up to 50 characters. A warning message is displayed on the B2BUA Trunking Configuration page if more than 50 characters are entered. Password Specifies the shared secret for SIP digest authentication. Registrar Displays registrar information: • If an address was given for a non-default registrar, this is shown in the format IP-ADDRESS:PORT. • If no address was given for a non-default registrar, this field is blank , because the address is determined through a DNS A lookup. • The field displays “Default” for the default SIP Registrar. Status Displays registration status: • Trying—Register Trying—The register request has been sent but no response has been received yet. • OK—A 200 response was received. The registration is successful. • Error message—The error code and the error phrase are displayed. For example, the registration failed for 403 Forbidden. Transport Displays the transport protocol used for Registration. If the default SIP server is configured as the registrar, then the SIP server Transport is shown as the transport protocol. When the SIP server Transport is 'Pass Through', UDP is chosen as the transport protocol. Credentials - New Entry Creates new credentials and registration information. Username Enter a valid SIP Username. This becomes part of the user portion of the AOR. If you want to enter a default credential, leave this field blank. Auth-User Enter the required default credentials. Otherwise, leave this field blank; B2BUA uses the Username as Auth-user. Edit Password Select the Edit Password checkbox to edit the password. Password Enter the required shared secret for SIP digest authentication. This field cannot be blank if you entered credentials in the Auth-User field. Confirm Password Re-enter the required shared secret for SIP digest authentication. Use as default Select the Use as Default checkbox to use this SIP Authentication credential by default (recommended). Registrar - New Entry Select a registration type radio button:• Don't Register—Default. The Username will not be registered. • Use B2BUA Rule—Configures the HMR rules for the REGISTER pilot message headers. Default SIP Proxy—B2BUA uses the default SIP proxy as configured on the SIP Settings page. Choose VoIP > SIP and refer to Configure SIP Protocol Settings to register the AOR. • Custom URI Domain—This configured custom domain is used in pilot registrations. It is applicable when IMS proxy mode is enabled in the survivability page. • Custom—Specifies custom Registrar settings. Domain Enter the Registrar domain. This should be entered as sip:proxydomain.com or sip:1.2.3.4. Address (Optional) Enter the Registrar's IP Address. If the IP address is provided, B2BUA does not do a DNS A lookup on the domain name and uses this address instead. Port Enter the Registrar port. Transport Select the Registrar port from the Transport drop-down list: • UDP • TCP • TLS Register Options (Optional) (Optional) Sets registration options when you set Default SIP Proxy or Domain as the Registrar: • Default Expires—Enter the number of seconds until expiration for the initial Register request. Defaults The field defaults to 3600 seconds if left blank. • Renew Interval—Enter the percentage of registration interval after which the B2BUA will renew the registration. Defaults The field defaults to 80% if left blank.

   
   

4. To edit a credentials entry:

   1. Click once on the entry in the Credentials and Registration table. The row is highlighted, and the information from about the selected line is displayed in the details box below the table.

   2. Edit details and click Update. Your changes are applied to the local cache. To save your configuration changes to the

      Spacevars
      0 product2

      , click Submit.

5. To delete a credentials entry, click the red X next to the selected entry. The entry is immediately removed from the Credentials and Registration table. You do not have to click Submit when deleting an entry.

6. Click Update to save your settings in the Credentials and Registration window.

7. Proceed to Manage B2BUA Actions.