Page History

Add_workflow_for_techpubs

REV2

AUTH1	UserResourceIdentifier{userKey=8a00a0c86820e56901685f374974002d8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
JIRAIDAUTH	SBX-124689132431
REV5	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e98a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e98a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a0c873d4d8b60173ed8bd4cf000a8a00a02355cd1c2f0155cd26cd5b09f6, userName='null'}
REV4	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb1f0553, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cbfd06f68a00a02355cd1c2f0155cd26cd5b09f6, userName='null'}	UserResourceIdentifier{userKey=8a00a0c85652e49801566aee91780006, userName='null'}

Panel

In this section:

Table of Contents

maxLevel	4

Include Page

	_SBC_does_not_support_Lync_Skype
	_SBC_does_not_support_Lync_Skype

Use this object to specify parameters associated with various enhanced services and features for this SIP trunk group.

Info

title	Info

Excerpt Include

	Command Line Structure
	Command Line Structure
nopanel	true

Include Page

	_Transparency_Profile_Note
	_Transparency_Profile_Note

Info

title	Note

As a best practice, always use UPPERCASE for trunk group names.

SIP Trunk Group Services

Command Syntax

Code Block

language	none

% set addressContext <name> zone <name> sipTrunkGroup <name> services
	blockProgressOn3XXResponse <disabled | enabled> 
    colocatedPandEcscf <disabled | enabled>
	dialogEventNotificationSupported <disabled | enabled>
	disconnectTreatmentProfile <h323Default | sipDefault>
	dnsNaptrAlways <disabled | enabled>
    dnsSupportType <a-only | a-srv-naptr>
    dynamicBlacklistProfile <profile name>
    emergencyCallHandlingMode <emergencyRegRequired | emergencyRegSupported | none | rejectWith380>
    emergencyCallProfile <profile name>
	enhancedDblProfile <profile name>
    honorSdpClockRate <disabled | enabled> 
	hpcCallProfile
    hplmnProfile <hplmnProfile>
    jsrcBandwidthReservation <disabled | enabled>
	localSurvivability    
        localSurvivableState <enable | disable >
        allowLocalRegistration <enable | disable >
    longDurationCall 
        action <noAction | release | trap | trapAndRelease> 
        emergencyCalls <exclude | include> 
        relCause <#> 
        timeoutValue <0-44640 minutes>
    natTraversal maxRouteAttempts <0-50>
	natTraversal
         reInitDtlsOnIceRestart <disabled / enabled> 
    noRDIUpdateOn3XX <disabled | enabled>
    overlapAddressing 
        minDigitsForQuery <#> 
        overlapState <disabled | enabled> 
        receive <InfoMethod | MultiInvite | disabled> 
        send <InfoMethod | MultiInvite | disabled> 
        timer1 <integer> 
        timer2 <integer> 
        timer3 <integer>
    preconditionIntwkUsing183 <disabled | enabled>
    preconditions <none | required | supported | transparent>
	privacyProfile <privacyProfile name>
    remoteEPreservation <disabled | enabled>
	retryProfile <profile name>
	sipAdaptiveTransparencyProfile
	sipArsProfile <profile name>
    sipCallNotificationMetadataProfile <sipRecMetadataProfile profile name>
    sipJipProfile defaultJipProfile
    sipJurisdictionSupport <disabled | enabled>
    sipParamFilterProfile <profile name>
    sipRecMetadataProfile <sipRecMetadataProfile>
        version <0..1>
        sipHeader <sipHeader>
          sipToXmlTagName <sipToXmlTagName>
          state <disabled | enabled> 
    sipSecurityProfile <profile name>
	stiProfile <profile name>
	storeIdentityHdrtoCdr <none, shaken, div, rcd, rph, other, all>
	testCallNumberProfile <profile name>
	transmitPreconditions <none | required | supported>
    transparencyProfile <Transparency Profile name>
	usePreviousLearnedIpAddress <disabled | enabled>
    vplmnProfile <vplmnProfile>

Command Parameters

Caption0Table1SIP Trunk Group Services

Parameters

Parameter Description

blockProgressOn3XXResponse

Enable this flag to prevent the SBX from generating a call forward progress (CPG) message towards the ingress side of the call. This could be mapped to an ISUP CPG on the GSX ISUP trunk or a 183 message if the ingress side is SIP.

disabled (default)
enabled

colocatedPandEcscf

Use this flag to support notification for a SUBSCRIBE with dialog event in this trunk group.

disabled (default)
enabled

Include Page

	_PSX only
	_PSX only

dialogEventNotificationSupported

Use this flag to support co-locating P-CSCF and E-CSCF on the ingress trunk group.

disabled (default)
enabled

Include Page

	_PSX only
	_PSX only

disconnectTreatmentProfile Disconnect Treatment Profile name.

dnsNaptrAlways

If enabled, the SBC always sends a Naming Authority Pointer (NAPTR) query when an FQDN needs to be resolved.

disabled (default)
enabled

dnsSupportType

Indicates whether to use the DNS server for just A-record lookups, or for full NAPTR/SRV/A lookup as specified in RFC3263.

a-only
a-srv-naptr

dynamicBlacklistProfile Dynamic Blacklist Profile name.

emergencyCallHandlingMode

Use this parameter to specify how to handle emergency calls.

emergencyRegRequired – Use this option to reject the emergency session establishment without an emergency registration.
Info
title Note
“usePsxRouteForEmergencyCall” must also be enabled to use this option.
emergencyRegSupported – Use this option when emergency registrations are supported, but emergency session establishment is possible without an emergency registration.

Info
title Note
“usePsxRouteForEmergencyCall” must also be enabled to use this option.
none (default) – Use this option when not using emergency registrations to perform PSX dip for registered user for emergency calls.

Info
title Note
“usePsxRouteForEmergencyCall” must also be enabled to use this option.
rejectWith380 – Use this option to reject an INVITE request with ‘380 Alternate Service’ response code from Ingress leg when the request is identified as emergency request and redirection flag is set to redirection mode.

See Emergency Registration for emergency registration functionality.

emergencyCallProfile Emergency Call Profile name.

enhancedDblProfile The name of the enhanced dynamic blacklist (DBL) profile. Refer to Enhanced DBL Profile - CLI and Configuring Enhanced Dynamic Blacklist Profile for more information.

honorSdpClockRate

Enable this flag to allow the mapping of up to five DTMF Payload Types (PT), each with a different clock rate of a preferred or selected payload type for audio.

If the flag is disabled, all DTMF PTs except 8 kHz (both send and receive) are dropped.

disabled (default)
enabled

hpcCallProfile The name of the HPC Call Profile. For more information, refer to HPC Call Profile - CLI.

hplmnProfile

Name of the HPLMN profile.

localSurvivability

Parameters associated with local survivability mode support which can be invoked when an Application Server is deemed unreachable by the Address Reachability Service (ARS).

localSurvivableState - enable this flag to enable the local survivability feature. Refer to Address Reachability Service for information on call routing and registration behavior when local survivability mode is in effect.
- disabled (default)
- enabled
allowLocalRegistration - enable this flag to allow local registration when ARS blacklists an Application Server. When enabled toward the access side of the deployment, the SBC handles new registration requests locally. The SBC accepts the registration request without authentication and locally respond with a 200OK.
- disabled (default)
- enabled

jsrcBandwidthReservation

Enable flag to require bandwidth reservation with Juniper Session Resource Controller.

disabled (default)
enabled

longDurationCall

The parameters associated with long duration call supervision.

action – This is the action to take if the long duration call timer expires.
- noAction (default)
- release
- trap
- trapAndRelease
emergencyCalls – Specifies whether Emergency Calls should be excluded from or included in Long Duration Call Disconnect procedures.
- exclude (default)
- include
relCause – The Q.850 release value to use should the call be released due to long duration call timer expiry. (default = 41).
timeoutValue – Timeout value (in minutes) of the long duration call timer.
- 0 (default) – Disable the timeout.
- 1-44640 – Set the timeout to the specified value.

natTraversalmaxRouteAttempts

Specifies the various parameters associated with network-hosted NAT/NAPT traversal for SIP endpoints. Specify the following NAT Traversal parameters. See NAT Traversal Parameters table below for parameter details.

Set the value of this parameter (0-50) to control the maximum number of egress routing attempts. Set on ingress TG, this parameter is a TG level configuration that restricts the maximum number of egress routing attempts for calls arriving on the ingress TG.

Range: 0-50
Default: 0 (unlimited number of egress routing attempts)

Info

title	Note

You must use this parameter in conjunction with the egress IP Signaling Profile control "forceRequeryForRedirection". For further details, refer to Egress IP Attributes - SIP - CLI.

natTraversal Specifies the various parameters associated with network-hosted NAT/NAPT traversal for SIP endpoints. Specify the following NAT Traversal parameters. See NAT Traversal Parameters table below for parameter details.

noRDIUpdateOn3XX

Enable this flag to prevent the SBC from incrementing the redirection counter and from updating the redirection information (RDI) parameter. The RDI counter value and RDI parameter could be used to update the (diversion headers or ISUP IAM MIME content) in the subsequent SIP INVITE for the SBX or GSX, or it could also be used to update the ISUP IAM parameter if the call

noRDIUpdateOn3XX

Enable this flag to prevent the SBC from incrementing the redirection counter and from updating the redirection information (RDI) parameter. The RDI counter value and RDI parameter could be used to update the (diversion headers or ISUP IAM MIME content) in the subsequent SIP INVITE for the SBX or GSX, or it could also be used to update the ISUP IAM parameter if the call gets redirected over the GSX.

disabled (default)
enabled

overlapAddressing

Parameters associated with overlap addressing support.

minDigitsForQuery – Minimum number of digits that need to be received before attempting to route the call. (range: 0-30 / default = 0).
overlapState – Specifies the whether to support or not support overlap addressing.
- disabled (default)
- enabled
receive – Use this parameter to specify the Incoming overlap type.
- InfoMethod – Select to support Info-based overlap dialing where initial INVITE with incomplete called party digits is answered locally by the SBC to establish early dialog, and subsequent digits are received through INFO message to complete dial sequence.
- MultiInvite – Select to process multiple INVITEs for the same call with additional digits to complete the dial sequence.
- disabled (default) – Select to disable this feature.
send – Use this parameter to specify the Outgoing overlap type.
- InfoMethod – Select to support Info-based overlap dialing where initial INVITE with incomplete called party digits is answered locally by the SBC to establish early dialog, and subsequent digits are received through INFO message to complete dial sequence.
- MultiInvite – Select to process multiple INVITEs for the same call with additional digits to complete the dial sequence.
- disabled (default) – Select to disable this feature.
timer1 – Specifies the maximum time (in seconds) between collection of digits. (range: 5-15 / default = 10)
timer2 – Maximum time (in seconds) between sending an INVITE and receiving a backward message. (range: 0-14 / default = 0).
timer3 – Maximum time (in seconds) between receiving a 484 Address Incomplete message (if there are no outstanding INVITE transactions) and the receipt of fresh address information. (range: 4-64 / default = 4).

preconditionIntwkUsing183

(This flag is for specific call flows and is not intended for generic use)

Enable this flag to locally generate first 183 responses for preconditions interworking before egressing INVITE. If disabled, these responses are dropped.

disabled (default)
enabled

Info

title	Note

Do not enable preConditionIntwkUsing183 when End-to-End Prack is configured.

preconditions

Use this parameter to level of preconditions support for incoming (only) requests.

none – (default)
required
supported
transparent – Select this option to allow the SBC to pass the received precondition option tag (either in require or supported) and precondition attributes present in SDP transparently.

Info

title	Note

The transparent option must be configured on both Egress and Ingress legs.

Info
For precondition support of outgoing requests, see `transmitPreconditions` flag below.

privacyProfile

<privacyProfile name> – The name of the Privacy Profile to attach to this SIP trunk group. Refer to Privacy Profile - CLI for configuration details.

remoteEPreservation

Enable flag to require bandwidth reservation with the Juniper Session Resource Controller for the remote endpoint.

disabled (default)
enabled

retryProfile The name of the SIP Retry Profile. Refer to Retry Profile - CLI and Configuring SRTP to RTP Fallback for more information.

sipAdaptiveTransparencyProfile

The name of the SIP Adaptive Transparency Profile.

Note: The SBC gives precedence to SIP Privacy handling when the SIP Adaptive Transparency Profile is enabled. For example, if the incoming SIP message has "privacy: Id" and the flag applyPrivacyId under profiles services privacyProfile is set to enable, the SBC does not include P-ASSERTED-ID header in the egress message. For information on SIP Adaptive Transparency Profile, refer to SIP Adaptive Transparency Profile - CLI.

sipArsProfile

The name of the SIP ARS (Address Reachability Service) profile.

sipCallNotificationMetadataProfile Specifies the name of a SIPREC metadata profile that defines the mapping of a SIP header to the Session-Id XML element in NOTIFY messages. This parameter should be set on the trunk group used to send call notifications. Refer to Services - SIP Rec Metadata Profile for information on these profiles. Refer to Sending Unsolicited Call Notifications to Application Servers for more information on the SBC's call notification feature.

sipJipProfile

defaultJipProfile is the name of the default SIP JIP profile assigned to SIP trunk groups. You can specify the name of a custom profile you created. Refer to SIP JIP Profile - CLI.

Info

title	Note

This parameter is only supported when the SBC is configured to use an external PSX.

sipJurisdictionSupport

Enable this flag to allow sending JIP information in SIP-SIP, SIP-SIP-I and SIP-I to SIP scenarios.

disabled (default)
enabled

Info

title	Note

This flag is only supported when the SBC is configured to use an external PSX.

sipParamFilterProfile The name of the SIP Param Filter Profile.

sipRecMetadataProfile

Indicates the name of the profile and specifies the SIP headers that are included in the SRS call.

version – Indicates the SIPREC metadata profile version. The options are:
- 0 (default) – When the version is set as 0, the SBC supports backward compatibility and predefined metadata for passing proprietary call specific information from the SRC to the SRS.
- 1 – When the version is set as 1, the SBC supports dynamic configuration of the metadata variables.
sipHeader – Indicates the SIP header, which are included in the SRS call. (Length: 1-31)
Info
title Note
No more than 32 SIP headers can be created in one sipRecMetadataProfile.
sipToXmlTagName – Indicates XML tag name for the configured SIP header. (Length: 1-31)
state – Indicates the admin state of the SIPREC metadata profile. The options are:

- disabled (default)
- enabled

sipSecurityProfile The name of the SIP Security Profile.

stiProfile The name of the STI Profile. Refer to STI Profile - CLI.

storeIdentityHdrtoCdr

The SBC stores the base64 decoded Identity headers received and sent in the SIP INVITE message. Use this flag to specify the Identity headers to store in the CDR record.

all
div
none (default)
other
rcd
rph
shaken

Info

title	Note

You can specify all the identity headers in the list to store them in the CDR, or choose the ones you require. However, if you select 'none' and another option, for example 'shaken', 'none' takes precedence and no identity headers are stored in the CDR.

Similarly, if you select 'all' and another identity header, for example 'shaken'. The choice 'all' takes precedence and all the identity headers in the list are stored in the CDR.

The priority order for writing in the CDR from the highest to the lowest is, SHAKEN, RPH, RCD, DIVs and OTHER. A maximum of nine identity headers are logged in the CDR for ingress and egress. If the higher priority headers take up all the space, then the lower priority headers are not written in the CDR.

When more than one SHAKEN header arrives in the Ingress INVITE, then the following is the order of precedence in which the Identity header is picked:

SHAKEN header with Attestation Level 'A is picked.
If more than one SHAKEN header with Attestation 'A' level is present, the top-most A level SHAKEN header is picked.
If no Attestation Level 'A' SHAKEN header is present, then Attestation level 'B' SHAKEN header is picked.
If more than one SHAKEN header with 'B' level is present, the top most 'B' level SHAKEN header is picked.
If no Attestation Level 'B' SHAKEN header is present, then Attestation level 'C' SHAKEN header is picked.
If more than one SHAKEN header with Attestation 'C' level is present, the top-most 'C' level SHAKEN header is picked.

O

testCallNumberProfile The SIP Test Call Profile used for this trunk group. Refer to Test Call Number Profile - CLI.

transmitPreconditions

Indicates level of preconditions support for outgoing request/response.

none – When set to "none", the
Spacevars
0 product
does not add SIP precondition attributes in SDP of outgoing request even if attributes are present in the SDP of incoming requests.
required – Use this option to add SIP precondition attributes in SDP of outgoing request even if attributes are NOT present in the SDP of incoming requests. If precondition attributes are added by the
Spacevars
0 product
, the local preconditions are set to ‘met’ and remote preconditions are set to ‘not-met’.
supported – (default) Use this option to ensure backward compatibility behavior. Use this option to add SIP precondition attributes in SDP of outgoing request only if attributes are present in the incoming request.

transparencyProfile The name of the Transparency Profile to associate with this SIP trunk group.

usePreviousLearnedIpAddress

Enable the flag to send new SIP requests mid-dialog to the previously-learned IP address before performing any SRV DNS query.

The previously-learned IP address is updated in the following cases:

SBC receives an INVITE from the peer.
SBC receives re-INVITE from the peer.
SBC receives 200 OK response to INVITE sent.
SBC receives 200 OK response to re-INVITE sent.

If a time-out occurs on requests sent to previously-learned Active IP address mid-dialog, a SRV DNS look up is performed.

disabled (default)
enabled

vplmnProfile

Name of the VPLMN profile.

Command Example

Code Block

title	Local Survivable Mode for Calls and Registrations

set addressContext default zone ZONE_IN sipTrunkGroup Ingress_TG services localSurvivability localSurvivableState enabled
set addressContext default zone ZONE_IN sipTrunkGroup Ingress_TG services localSurvivability allowLocalRegistration enabled

To view the status of the local survivability state and allow local registration, execute the command:

Code Block
show addressContext default zone ZONE_IN sipTrunkGroup Ingress_TG services localSurvivability localSurvivabilityState enabled; allowLocalRegistration enabled; [ok]

NAT Traversal

Command Syntax

Code Block

language	none

% set addressContext <name> zone <name> sipTrunkGroup <name> services natTraversal 
	adaptiveLearning
		maxTcpPinholeTimer <60-65535>
		maxUdpPinholeTimer <60-65535>
		reLearningInterval <1-240>
		state <disabled | enabled> 
	iceSourceAddressFilterPriority
		serverReflexivePrefixLength <unsignedInt | 0..32>
        state <disabled | enabled>
	iceSupport 
		none
		iceWebrtc
		iceLynciceFull
			iceKeepaliveTimer <0-60 seconds>
		iceFull
			iceKeepaliveTimer <0-60 seconds>
	iceTcpRole <activeiceTcpRole <active | passive>
	iceTrickle <disabled | passive>enabled>
	learnNatForRtpOnly <disabled | enabled>
	mediaNat <disabled | enabled> 
	disableMediaNatIfSameMediaAndSigIp <disabled | enabled>
	outboundTcpKeepaliveTimer <0-32767> 
	outboundUdpKeepaliveTimer <0-32767>
	qualifiedPrefix <IPv4 address> 
	 address> 
    reInitDtlsOnIceRestart <disabled / enabled>
    secureMediaNatPrefix <0-32>
	signalingNat <disabled | enabled>
	tcpKeepaliveTimer <15-65535> 
	udpKeepaliveTimer <15-65535>

Command Parameters

caption

Parameters

0	Table
1	NAT Traversal Parameters
3	NAT Traversal Parameters

iceLync Microsoft Lync 2010 or 2013 client. MSLync

iceFull – Select this attribute when interworking with a full ICE client requiring the generation of a STUN connectivity check by the SBC in response to its own STUN connectivity check.

iceKeepaliveTimer – Set Keep-Alive timer value, in seconds, for full-ICE to prevent network loss of STUN message exchanges. (range: 1-60 / default = 15)

Length/Range Parameters Length/Range Description

adaptiveLearning

N/A

Adaptive NAT pinhole learning parameters.

maxTcpPinholeTimer – Defines upper limit of the pinhole timeout for TCP in seconds. (range: 60-65535 / default = 600).
maxUdpPinholeTimer – Defines the upper limit of the pinhole timeout for UDP in seconds. (range: 60-65535 / default = 180).
reLearningInterval – Interval in hours at which the pinhole timeout is relearned. (range: 1-240 / default = 24).
state– Enables/disables the adaptive nat pinhole timeout learning process for devices behind NAT.
- disabled (default)
- enabled

iceSourceAddressFilterPriority

N/A

Enable this parameter for the SBC to prioritize the processing of STUN packets matching the source addresses received in the candidate lines of the ICE SDP received from the peer during the STUN connectivity check phase.

serverReflexivePrefixLength – The length (in bits) of the prefix for server reflexive IP address (range: 0-32 / default = 16).
state – Administrative state of iceSourceAddressFilterPriority.
- disabled
- enabled (default)

Info

title	Note

The filtering mechanism is applicable to the following RTP address types:

- IPV4 Server Reflexive Address (for this address type, filtering is based on the provisioned Server Reflexive Prefix Length)
- IPV4 Relay Address
- IPV6 Relay Address
- IPv6 Host Address

Include Page

	_iceSourceAddressFilterPriority_note
	_iceSourceAddressFilterPriority_note

iceSupport

N/A

This parameter indicates the type of ICE method used for STUN packet check.

none (default)
iceWebrtc – Select this attribute for WebRTC Gateway interworking. For example, using the Ribbon WRTC Gateway, or in situations when the SBC is presented with an ICE SDP from a WebRTC-enabled Endpoint. When configured for this mode, the SBC acts as a generic ICE-Lite agent.

iceFull – Select this attribute when interworking with a

full ICE client requiring the generation of a STUN connectivity check by the SBC in response to its own STUN connectivity check.
- iceKeepaliveTimer – Set Keep-Alive timer value, in seconds, for

- full-

- ICE to prevent network loss of STUN message exchanges. (range: 1-60 / default = 15)

Info

title	Note

For MS Lync ICE (iceLync setting), keep-alive messages are sent only to RTP port.

Include Page_ICE_note_ICE_note

Refer to Configuring SBC for WRTC for ICE-Lite configuration best practices.

iceTcpRoleN/A

Use this flag to specify if SBC initiates the TCP connection for ICE Lync.

active – Use this option for the SBC to initiate the TCP connection when connected to internal-facing trunk groups where the peer is not behind the NAT. Also, use this option when working with certain Unified Communication (UC) servers such as Acano which expect the peer to initiate the TCP connection. This is only supported when there are no NATs between the SBC and the UC server.
passive (default) – The SBC waits for the peer to initiate the TCP connection. Use this option when working directly with Lync endpoints.

Info

title	Note

The iceSupport parameter must be set to IceLync to configure this flag.

Refer to Configuring SBC and LYNC in Media Environment for configuration details.

learnNatForRtpOnlyN/AEnable flag to learn media NAT from the first RTP packet only. If disabled, media NAT is learned from any first packet received. For egress trunk groups, this flag is applicable only if dynamicLRBT flag is disabled. If dynamicLRBT is enabled, NAPT learning occurs on arrival of RTP packet until the call is connected, at which point learnNatForRtpOnly applies even for egress trunk groups.

disabled (default)
enabled

Info

title	Note

The flag mediaNat must be enabled to use this flag.

Info

title	Note

Do not enable learnNatForRtpOnly for SIP trunk groups with iceSupport enabled because it does not apply to ICE NAT traversal.

Include Page

	_ICE_note
	_ICE_note

Refer to Configuring SBC for WRTC for ICE-Lite configuration best practices.

iceTrickleN/A

Multiexcerpt include

MultiExcerptName	Trickle ICE definition
PageWithExcerpt	Services - NAT Traversal

Use this flag to enable Trickle ICE support for this trunk group.

disabled (default)
enabled

Include Page

	_Trickle_Ice_Warning
	_Trickle_Ice_Warning

learnNatForRtpOnlyN/A

Enable flag to learn media NAT from the first RTP packet only. If disabled, media NAT is learned from any first packet received. For egress trunk groups, this flag is applicable only if dynamicLRBT flag is disabled. If dynamicLRBT is enabled, NAPT learning occurs on arrival of RTP packet until the call is connected, at which point learnNatForRtpOnly applies even for egress trunk groups.

disabled (default)
enabled

Info

title	Note

The flag mediaNat must be enabled to use this flag.

Info

title	Note

Do not enable learnNatForRtpOnly for SIP trunk groups with iceSupport enabled because it does not apply to ICE NAT traversal.

mediaNat N/A

Use this flag to specify whether or not NAT/NAPT support is required for media.

disabled (default)
enabled

Include Page

	_ICE_note
	_ICE_note

Include Page

	_No_NAT_for_IPv6
	_No_NAT_for_IPv6

disableMediaNatIfSameMediaAndSigIpN/A

Enable this flag to disable Media NAT if Media and Signaling IP addresses are identical.

disabled (default)
enabled

outboundTcpKeepaliveTimer0-32767

The NAT outbound keepalive timer (in seconds) for SIP over TCP for SIP outbound-supported UAs (RFC 5626).

(default = 240)

outboundUdpKeepaliveTimer0-32767

The NAT outbound keepalive timer (in seconds) for SIP over UDP for SIP outbound-supported UAs (RFC 5626).

(default = 60)

qualifiedPrefix N/ASet of IP network media and signaling prefixes that an address must match for NAT handling. If there are no entries in qualifiedPrefix table, the endpoint is treated as existing behind a NAT device. As a result, the SBC considers requests from all IP addresses to be behind a NAT device.

ipAddress – IPv4 address.
prefixLength – Value from 0-128 specifying the number of bits representing the network part of ipAddress.

reInitDtlsOnIceRestartN/A

This flag indicates how the SBC handles the existing DTLS connection on an ICE restart If enabled, regardless of a change in the DTLS parameters, the SBC tears down the existing DTLS connection.

Note: This flag is only applicable to DTLS calls using ICE.

Note: This flag will be displayed only if iceSupport is configured to any value other than 'none'.

disabled
enabled (default)

mediaNat

Specifies the whether or not NAT/NAPT support is required for media.

disabled (default)
enabled

Include Page_ICE_note_ICE_note Include Page_No_NAT_for_IPv6_No_NAT_for_IPv6disableMediaNatIfSameMediaAndSigIpN/A

Enable this flag to disable Media NAT if Media and Signaling IP addresses are identical.

disabled (default)
enabled

outboundTcpKeepaliveTimer0-32767The NAT outbound keep-alive timer (in seconds) for SIP over TCP (default = 240)outboundUdpKeepaliveTimer0-32767The NAT outbound keepalive timer (in seconds) for SIP over UDP (default = 60)qualifiedPrefix N/ASet of IP network media and signaling prefixes that an address must match to be considered for NAT handling. If there are no entries in qualifiedPrefix table, the endpoint is treated as existing behind a NAT device. As a result, the SBC considers requests from all IP addresses to be behind a NAT device.

ipAddress – IPv4 address.

prefixLength – Value from 0-128 specifying the number of bits representing the network part of ipAddress.

secureMediaNatPrefix 0-32

Use this parameter to match up to 'N' bits of the network IPv4 address obtained from signaling. If set to "0", feature is disabled, and no match of network IP address will occur.

(default = 0)

signalingNat N/AThis indicates

Use this flag to indicate whether or not NAT/NAPT support is required for signaling.

disabled (default)
enabled

Include Page

	_No_NAT_for_IPv6
	_No_NAT_for_IPv6

tcpKeepaliveTimer15-65535

This NAT TCP keep-alive timer sets the registration refresh rate (in seconds) for SIP over TCP.

(default = 240)

.

udpKeepaliveTimer 15-65535

This NAT UDP keep-alive timer sets the registration refresh rate (in seconds) for SIP over UDP.

(default = 60)

.

pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 1

New Version Current

Key

SIP Trunk Group Services

Command Syntax

Command Parameters

Parameters

Command Example

NAT Traversal

Command Syntax

Command Parameters