Page History
...
These statistics are available on a real time (CURRENT) or on a historical (INTERVAL) basis. By default, the
Spacevars | ||
---|---|---|
|
Spacevars | ||
---|---|---|
|
On the SBC main screen, go to All > System >Interval Statistics. The Interval Statistics window is displayed.
Figure 1: System - Interval Statistics
...
The following fields are displayed:
Table 1: Interval Statistics parameters
Parameter | Description | ||||||
---|---|---|---|---|---|---|---|
Time Interval | Specifies the range of the timer interval in minutes that can be used by the configuration management for activities such as to measure the statistics of certain resources. Must be 5-60 (minutes), The time interval (in minutes) for interval statistics data. Range: 5-60 minutes; default is 15.
| ||||||
Number of Past | Specifies the range of the The number of past interval that can be configured to configure for retrieving the statistics data. Must be Range: 1-12 ( intervals), ; default is 4. | ||||||
Max File Retention Period | Specifies the The maximum retention period for statistics files stored on disk. The value ranges from 60 to 1440 minutes and the default value is 60 minutes. | ||||||
Node Id | The
configured nodeID for this system to be used as part of the file name when writing the statistics to the file. The node ID is part of the file name for the PMS tar files. The default value is 0 which states as "unassigned". | ||||||
Call Count Time Interval | Specifies the The time interval for interval statistics of call Count data. The value ranges from 5 to 60 minutes and the default value is 15 minutes. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.