Page History
| Panel | ||||
|---|---|---|---|---|
In this section:
|
| Info | ||
|---|---|---|
| ||
Related articles: |
Use this profile to configure the
active profile name using the built-in standard profiles.Spacevars 0 product2
Excerpt Include SBXDOC111:_SBC_1:1_Scenario_with_RAMP SBXDOC111:_SBC_1:1_Scenario_with_RAMP nopanel true
| Info | ||
|---|---|---|
| ||
This feature is only applicable when four or more vCPUs are configured. |
| Info | ||
|---|---|---|
| ||
An active profile cannot be deleted. |
| Warning | ||
|---|---|---|
| ||
The active system (and standby system in HA configuration) system is rebooted. All active calls are lost during this process. |
| Info |
|---|
Standard profiles make some assumptions regarding the traffic model and, hence, may not be the optimal profile for the deployment of an I-SBC. To get the maximum capacity, create a custom traffic profile that matches the actual traffic input to the I-SBC. Refer to SWe Traffic Profiles - CLI. |
For SBC SWe cloud-based deployments, the profiles are automatically configured based on the personality. Auto-configuring a profile prevents reboot reboot during instantiation.
| 0 | Table |
|---|---|
| 1 | SBC SWe Automatic Configuration |
| 3 | SBC SWe Personality-Based Configuration |
The following table represents the SBC SWe automatic configuration:
Personality |
|---|
Type | Profile Name |
|---|---|
| I-SBC | default |
| S-SBC | standard_signaling_profile |
| M-SBC | standard_msbc_profile |
Command Syntax
The system sweActiveProfile CLI syntax is shown below.
| Code Block |
|---|
% set system sweActiveProfile name <profile name> default standard_callmix_profile standard_msbc_profile standard_passthrough_profile standard_signaling_profile standard_transcoding_profile standard_highcps_callmix_profile |
Command Parameters
The following table lists and describes the standard profiles.
| 0 | Table |
|---|---|
| 1 | SBC SWe Active Profile Parameters Profiles |
| 3 | SBC SWe Active Profile Profiles |
:
Profile
Profile |
|---|
Description | |
|---|---|
default | By default, non-cloud I-SBC instances use the default profile. This profile supports a call mix containing a combination of 98% pass-through and 2% transcoding. |
standard_callmix_profile | This profile supports a call mix containing a combination of 90% pass-through and 10% transcoding calls. |
standard_msbc_profile | This profile is auto-configured |
on cloud-based M-SBC instances. This profile utilizes the vCPUs for pass-through calls. | |
standard_passthrough_profile | This profile utilizes the vCPUs primarily for pass-through calls. |
standard_signaling_profile | This profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on cloud-based S-SBC instances. |
standard_transcoding_profile | This profile utilizes the vCPUs for transcoding calls. |
standard_highcps_callmix_profile | This profile is similar to the standard |
pass-through profile, but with higher CPS. |
Command Example
Activate the standard_transcoding_profile as the active traffic profile.
| Code Block |
|---|
set system sweActiveProfile name standard_transcoding_profile commit The following warnings were generated: 'system sweActiveProfile': To Activate the Profile system will be rebooted.All active calls will be lost during this process. Do you wish to continue? Proceed? [yes,no]yes |
| Info | ||
|---|---|---|
| ||
For information on the procedure to activate a custom GPU profile, refer to the section "Configure GPU I-SBC on Openstack" section of the page Configuring SBC SWe in OpenStack Cloud Environment for GPU Transcoding. |
Overview
Content Tools