Page History
...
| Note |
|---|
NTT DOCOMO Officelink, SoftBank ConnecTalk, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC 1000-/2000 only. |
| Note |
|---|
| Spacevars | 0 | series5
| Note |
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
...
| Note |
|---|
The E911 Elin number from the "CompanyName" field configured in Lync Skype location services is used as used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Skype Setup. For more information, see Creating and Modifying Entries to Transformation Tables. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The SIP trunk used for connection to the IP phones. Valid options: ATT SIP Trunk, Other SIP Trunk, Verizon SIP Trunk, KDDI SIP Trunk, Broadsoft Trunk, SoftBank ConnecTalk, SoftBank White Office, NTT DOCOMO Officelink, and Twilio SIP Trunk. The SIP Trunk selected determines the field options displayed in Step 2. See see Step 2 - Configure SIP Details for Endpoint. |
Broadsoft Trunk Type
| Panel | ||||
|---|---|---|---|---|
| ||||
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access. This field is available only when the SIP Trunk type is Broadsoft Trunk. |
...
These fields apply if you selected AT&T SIP Trunk in 351074216Step 1 - Select Scenario.
AT&T SIP Trunk
Border Element Server
...
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
KDDI SIP Trunk Anchor KDDI SIP Trunk KDDI SIP Trunk
...
These fields apply if you selected NTT DOCOMO Officelink Trunk in 351074216Step 1 - Select Scenario.
| Note |
|---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
...
These fields apply if you selected Other SIP Trunk in 351074216 Step 1 - Select Scenario.
Other SIP Trunk
Border Element Server
...
These fields apply if you select SoftBank ConnecTalk in 351074216Step 1 - Select Scenario.
SoftBank ConnecTalk
Primary SIP Server
...
These fields apply if you selected SoftBank White Office in 351074216Step 1 - Select Scenario.
SoftBank White Office
WAN Link
...
These fields apply if you selected Telstra Enterprise SIP Connect in 351074216Step 1 - Select Scenario.
Telstra Enterprise SIP Connect Trunk
...
These fields apply if you selected Verizon Managed Service in 351074216 Step 1 - Select Scenario.
Verizon SIP Trunk
Border Element Server
...
These fields apply if you selected Broadsoft Trunk in 351074216 Step 1 - Select Scenario.
Server Domain
| Panel | ||||
|---|---|---|---|---|
| ||||
The FQDN of the server domain. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the 351074216 Broadsoft Trunk Type field. |
IP Phone Registrar - Field Definitions
...
These fields apply if you selected Twilio SIP Trunk in Step 1 - Select Scenario.
Field | Description |
|---|---|
| Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid entries: UDP or TCP. |
| Port Number | The port number for the SIP server used to send and receive SIP messages between the SBC and the Border Element Server. |
| Use Secondary Border Element Server | Enables or disables the secondary Remote Peer service provider configured. |
| Secondary Border Element Server | Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
| Protocol | The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
| Port Number | The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
| Signaling/Media Source IP | Select the external (Internet-facing) IP address for the server that handles routing of messages for signaling and media. |
| Outbound NAT IP | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:
NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
IP Phone Registrar - Field Definitions
...
Overview
Content Tools