Status Panel LEDs
...
...
...
Caption |
---|
0 | Figure |
---|
1 | Status Panel LEDs |
---|
|
Image Removed |
...
1. Power Status LED
This status LED indicates the power conditions of the
system. The normal state of this LED is on and green....
System is connected to proper power source.
...
2. Alarms Status LED
This status LED indicates the alarm state of the
system. The normal state of this LED is green, indicating there is no alarm.For detailed information about alarm types, see Alarms and Events Reference.
...
Critical alarm.
3. Peer Node Status LED (Locator LED)
Tip |
---|
The Peer Node Status LED is also recognized as the Locator LED when configuring this option in the WEB GUI. |
This status LED is green when the
system is fully powered up. It is also used as a system locator LED for the SBC unit (the green blinking light helps network personnel easily locate the SBC in a rack with other equipment). Through the WEBUI, this LED can be turned off or made to blink once per second. See Configuring Host Information and DNS....
4. Ready Status LED
This status LED indicates if the
system is properly initialized. The normal state of this LED is on and green....
Ethernet Port Status LEDs
This section describes the Ethernet Port Status LEDs located in the right and left corners of the Ethernet ports. See below for LED ranges.
Caption |
---|
0 | Figure |
---|
1 | Ethernet Port Status LEDs |
---|
|
Image Removed |
...
1. Ethernet Port Status LED
Tip |
---|
The Ethernet LEDs displayed represent a ; the Ethernet LEDs function is the same for the . |
This Ethernet Port Status LEDs indicate the status conditions of the Ethernet ports on the
system....
Left-Side LED
...
Right-Side LED
...
Right/Left LED Combinations
...
...
Status Panel LEDs
This section describes the Status LEDs located on the front panel of the
chassis. Overall, when all four Status LEDs are lit green, the system is powered up and is in good operating condition. See below for individual LED ranges. For more information about the error states of these LEDs, see
Status Panel States and Actions.
Section |
---|
Caption |
---|
0 | Figure |
---|
1 | Status Panel LEDs |
---|
| Image Modified |
1. Power Status LEDThis status LED indicates the power conditions of the system. The normal state of this LED is on and green.Color | Status |
---|
Green | System is connected to proper power source. | Off | System is not connected to power source. |
2. Alarms Status LEDThis status LED indicates the alarm state of the system. The normal state of this LED is green, indicating there is no alarm.For detailed information about alarm types, see Alarms and Events Reference. Color | Status |
---|
Green | No alarm. | Off | Warning (indicates the lowest severity level of an alarm has occurred). | Amber | Minor alarm. | Red | Major alarm. | Red Blinking | Critical alarm. |
3. Peer Node Status LED (Locator LED) Tip |
---|
The Peer Node Status LED is also recognized as the Locator LED when configuring this option in the WEB GUI. |
This status LED is green when the system is fully powered up. It is also used as a system locator LED for the SBC unit (the green blinking light helps network personnel easily locate the SBC in a rack with other equipment). Through the WEBUI, this LED can be turned off or made to blink once per second. See Configuring Host Information and DNS.Color | Status |
---|
Green | System is fully powered up. | Off | User Enabled option. LED is turned off through the LED Locator configuration option. See Configuring Host Information and DNS. | Blinking Green | User Enabled option. LED is turned to blinking green through the LED Locator configuration option. Light will blink once per second. See Configuring Host Information and DNS. |
4. Ready Status LEDThis status LED indicates if the system is properly initialized. The normal state of this LED is on and green.Color | Status |
---|
Green | System is properly initialized. | Off | System is not properly initialized. |
|
Section |
---|
Ethernet Port Status LEDsThis section describes the Ethernet Port Status LEDs located in the right and left corners of the Ethernet ports. See below for LED ranges. Caption |
---|
0 | Figure |
---|
1 | Ethernet Port Status LEDs |
---|
| Image Modified |
1. Ethernet Port Status LED Tip |
---|
The Ethernet LEDs displayed represent a ; the Ethernet LEDs function is the same for the . |
This Ethernet Port Status LEDs indicate the status conditions of the Ethernet ports on the system.Left-Side LEDColor | Status |
---|
Amber | Indicates Ethernet port speed at 10/100Mbps. | Off | Indicates Ethernet port speed at 1000Mbps. |
Right-Side LEDColor | Status |
---|
Green | Ethernet link is established. | Flashing Green | Ethernet link is active. Data is being sent/received. | Off | Ethernet link is down. |
Right/Left LED CombinationsLeft-Side Color | Right-Side Color | Result |
---|
Amber | Off | Port speed is 10Mbpbs. Ethernet link is down. | Amber | Green | Port speed is 100Mbps. Ethernet link is established. | Off | Green | Port speed is 1000Mbps. Ethernet link is established. |
|
...