Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel

In this section:

Table of Contents
maxLevel2


Redirect ISO File

Perform the following steps to redirect the ISO file.

  1. Login as user root on the VMware ESXi GUI.
    1. Enter your VMware administrator user name.
    2. Enter your VMware administrator password.
  2. Click Virtual Machines, and click the VM that you want to configure.
    Caption0Figure 1VM03 : VM03 Details
    Image Modified

    Include Page
    _Screenshot_disclaimer
    _Screenshot_disclaimer


  3. Click Edit to adjust the VM settings.
  4. Expand the CD/DVD Drive 1 drop-down menu. Caption0
    Figure 1Adjust 2: Adjust Drive Settings

    Image Modified


  5. In the Status field, check the Connect at power on box.
  6. In the CD/DVD Media field, click Browse... Caption0
    Figure 13: Browse ISO Files
    Image Modified


  7. Navigate to the ISO file and click Select. Caption0
    Figure 1Adjusted 4: Adjusted Drive Settings
    Image Modified


  8. Click Save.

Install SBC SWe OS

Perform the following steps to install the SBC SWe OS.

  1. Login as user root on the VMware ESXi GUI.
    1. Enter your VMware administrator user name.
    2. Enter your VMware administrator password.
  2. Click Virtual Machines, and click the VM that you want to configure.
  3. Click Power on to power on the VM that has the ISO file. Caption0
    Figure 1VM03 5: VM03 Power On
    Image Modified

    Include Page
    _Screenshot_disclaimer
    _Screenshot_disclaimer


  4. The ConnexIP Installer window is displayed. Press Enter.  Caption0

    Figure

    1ConnexIP

    6: ConnexIP Installer
     Image Modified

     


    0You are prompted to enter the login credentials once the installation is complete. Caption

    Figure 1Login 7: Login Prompt

    Image Modified


  5. Log onto on to the CLI as linuxadmin. The system prompts you for the following IP addresses:

    Note

    Make sure you enter the exact primary management IPv4, network mask, and gateway IP details. You will have to reinstall the OS if the details are incorrect.

    1. Primary Management IPv4 Address

    2. Primary Management Network Mask

    3. Primary Management Gateway IP Address

    4. IPv6 Address. Press y and enter the IPv6 address if you want to set IPv6. Press n if you do not want to set IPv6.

      Info

      The IPv6 address for management can be configured only in this step.

      Caption0

      Figure 1Enter 8: Enter IP Addresses

      Image Modified

Verify the Configured Logical Interfaces

Perform the following steps to verify the MAC Addresses.

  1. Login as user root on the VMware ESXi GUI.
    1. Enter your VMware administrator user name.
    2. Enter your VMware administrator password.
  2. Click Virtual Machines, and click the VM that you want to configure.
  3. Click Console and select an option to open the console. Caption0
    Figure 19: Open Console
    Image Modified

    Include Page
    _Screenshot_disclaimer
    _Screenshot_disclaimer


  4. Execute Run the following command to retrieve the mapping MAC address:

    Code Block
    ifconfig -a

    Execute Run the following command to retrieve the specific interface MAC address for the management interface:

    Code Block
    ifconfig mgt0


    Info

    If you have other network interfaces configured for NIC teaming, repeat this step to retrieve the MAC addresses (refer to Configure the NIC Teaming).


  5. Note the mapping MAC address for each interface and then exit the console. Caption0

    Figure 110: Console - MAC Address
    Image Modified


  6. Click Edit.
  7. Expand the Network Adapter drop-down menus and verify that the MAC addresses map to the correct network interfaces.

    Note

    In the Status field, do not uncheck the Connect at power on the box.


    Note
    titleKeystroke Errors After OS Installation

    If you are using a wide-area or low-bandwidth connection, the time delay over the network may cause the virtual machine to start autorepeat. This can manifest in unintended repeated keystrokes when typing in a remote console. If you experience this issue, refer to the VMware Knowledge Base for a solution.

    Caption0

    Figure 1Verify 11: Verify MAC Address

    Image Modifiedpagebreak