Page History
...
Initial Setup Screen (Spacevars 0 company
SBC with built-in ASM)
| 0 | company |
|---|
...
| borderStyle | none |
|---|
An asterisk beside a field indicates that it is a mandatory/required field.
| Caption | ||||
|---|---|---|---|---|
| ||||
| Pagebreak |
|---|
Field Definitions - System Information
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Typically useful if the SBC system resides on a network that uses an internet domain name (such as ribbon.net). This field is displayed only when Static is selected from the Network Configuration field. |
| Info |
|---|
You must populate this field for Microsoft Teams Direct Routing deployments or if you are using certificates for TLS. |
Time Zone
| Panel | ||||
|---|---|---|---|---|
| ||||
Use this field to set the local time zone of the SBC. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Netmask which will be applied to the Ethernt Ethernet 1 IPv4 address. This field is required. This field is displayed when the Network Configuration field is set to Static. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Enter a password for the REST user. |
Confirm Password
| Panel | ||||
|---|---|---|---|---|
| ||||
Re-enter the same password for the REST user as you configured in the Enter Password field. |
...
The Additional Static IP Route configuration enables you to create static routes/gateways for the additional Ethernet interface, if required. To create a static route, click the () icon in the Additional Static IP Routes section. Enter the fields with the definitions below and click OK. For detailed information about adding Static routes, see Creating Entries in a Static IP Route Table.
...
...
| 0 | Figure |
|---|---|
| 1 | Add Static Route Entry |
Destination IP
| Panel | ||||
|---|---|---|---|---|
| ||||
Enter the destination IP Address. This field is required. |
...
| Tip |
|---|
Once you have clicked OK, you may connect the SBC 1000 to your network using Ethernet Port 1. The SBC will now be reachable on its new IP address - you may browse to it now. |
...
Overview
Content Tools