Page History

...

1. From the Configuration Menu, select Network.

2. Configure settings (as shown below as a guideline).

3. Click Submit.
   
   
   

   
   The following tables describe information displayed on the Network page.
   
   LAN Interface Settings
   

   
   

   Connects your system to the Local Area Network (LAN) for voice, video, and data service. See Configuring LAN Interface Settings. 

   Caption
   0 Table 1 LAN Interface Settings
   Parameter Description IP Address Specifies the IP address needed to establish the connection to the LAN.Note: The system is shipped with a default LAN IP address of 192.168.1.1 and a default password. Following configuration, change the default password using the Administration page. Click Admin in the Configuration Menu and refer to Change Your Password.  Subnet Mask Specifies the network mask associated with the IP Address. Default: 255.255.255.0. IPv6 Address/Prefix Specifies the local IPv6 address and prefix to configure the LAN interface to be IPv6 enabled. Enable VLAN Support Enables VLAN support in the LAN. Click Network > VLAN in the Configuration Menu and refer to Configuring VLAN Support.  Default VLAN ID Displays the VLAN ID of the primary LAN interface. If a port has multiple VLANs assigned to it, it will use this VLAN ID as the PVID by default. Enable MultiLAN Ports Enables the second and third Ethernet LAN ports on the EdgeMarc 7000 Series. Ports 5 and 6 become active; VLANs are created on Port 1 (eth0) by default. The three LAN ports (1, 5 and 6) are grouped into a bridge (br_lan0). A LAN IP address is assigned to the bridge and services such as VoIP now use the bridge (br_lan0) instead of the physical interface (eth0). You can optionally change settings on the VLAN Membership page to create VLANs on the other ports and change packet types (all, tagged or untagged, along with PVID) on the VLAN Port Configuration page for each port. LANs and VLANs are grouped into bridges accordingly and VoIP and some other services can be configured to work on a specific bridge interface. Refer to: Configuring Multi LAN Ports. NOTE: The LAN and WAN networks must be different subnets. The LAN and WAN interfaces must not be attached to the same broadcast domain. For example,the LAN and WAN interfaces cannot be connected to the same hub or switch unless they are segmented with VLANs.

   
   

   WAN Interface Settings

   Info
   The EdgeMarc 6000-series does not support T1/E1 data; it supports T1/E1 PRI only.

   
   Selects the method used to obtain a connection to the Internet. Refer to Configuring WAN Interface Settings.

   Caption
   0 Table 1 WAN Interface Settings
   Parameter Description IPv6 Options IPv6 is available only on certain Spacevars 0 product2 models  Refer to Configuring WAN Interface Settings. Disabled: Disables IPv6 functionality depending on your network configuration requirements. Static IP Address: Configures the WAN interface with a static IP Address (default). Refer to Configuring WAN Interface Settings. IPv6 in IPv4 Tunnel: Configures the local and remote tunnel gateway. This allows tunneling of IPv6 packets over an IPv4 network. Refer to Configuring WAN Interface Settings. VLAN: Selects the VLAN defined in Configure WAN Interface Settings. See Configuring VLAN Support. T1: Configures the WAN interface with a static IP address and tests the T1 interface on the system using the T1 Configuration page. (Available only on certain models). Refer to Configure WAN Interface Settings and Configuring T1 Settings. Mobile: Enables you to get a WAN side IP address via a mobile network service provider. Make sure the SIM Card is inserted before booting the device. Otherwise, reboot the device to get the SIM card detected. Refer to Configuring WAN Interface Settings. Note: The option Mobile is available only on  Spacevars 0 product2  6000 devices as LTE WAN functionality is available only on these devices. IPv4 Options Refer to Configuring WAN Interface Settings. Disabled: Disables IPv4 functionality depending on your network configuration requirements. ADSL: Configures the integrated ADSL modem (available only on certain models). Refer to Configuring WAN Interface Settings. PPPoE: Initiates a PPP session over your WAN Ethernet port. Refer to Configuring WAN Interface Settings. DHCP: Configures the device to obtain the WAN-side IP address using a DHCP server available from the WAN side of the network. To see the WAN IP address for the system, go to Network > Network Information. Refer to Configuring WAN Interface Settings. Static IP Address: Configures the WAN interface with a static IP address (default). Refer to Configuring WAN Interface Settings. VLAN: Selects the VLAN defined in Configure WAN Interface Settings. T1: Configures the WAN interface with a static IP address and tests the T1 interface on the system using the T1 Configuration page. (Available only on certain models). Refer to Configuring WAN Interface Setting and Configuring T1 Settings.   Mobile: Enables you to get a WAN side IP address via a mobile network service provider. Make sure the SIM Card is inserted before booting the device. Otherwise, reboot the device to get the SIM card detected. Refer to Configuring WAN Interface Setting. Note: The option Mobile is available only on  Spacevars 0 product2  6000 devices as LTE WAN functionality is available only on these devices. IP Address Specifies the WAN Interface IPv4 IP address. Subnet Mask Specifies the WAN Interface IPv4 subnet mask.

   
   Network Settings
   Used with Static IP (Ethernet). Refer to Configuring Network Default Gateway Settings.

   Caption
   0 Table 1 Network Settings
   Parameter Description Default Gateway Specifies the IPv4 default gateway.

   
   DNS Servers
   Refer to Configuring DNS Servers.

   Caption
   0 Table 1 DNS Server Settings
   Parameter Description Manually Set DNS Allows you to supply specific DNS configuration information. To configure dynamic DNS, choose Network > Dynamic DNS and refer to Configure Dynamic DNS. Primary DNS Specifies the primary DNS server supplied by the ISP. The Primary DNS server should be the fastest available DNS server for your system. Secondary DNS Specifies the Secondary DNS server supplied by the ISP. Used to reduce the risk of one or more DNS servers not being available.

   
   

...