Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. The system default LAN IP is 192.168.1.1 with username 'root' and password 'default'.
    Attach LAN Port 1 of the system to the LAN network or directly to the management computer for the first-time IP networking setup.


  2. The system will prompt you to change the default password.



  3. Password change is confirmed. Click the link provided to log in with the new password.



  4. Once you log in, the landing page appears.



  5. Select Network from the Configuration Menu on the left-hand side.

  6. Configure the LAN Interface Settings.



  7. Configure the WAN Interface and Default Gateway Settings.



  8. Configure the Primary and the Secondary DNS to a public DNS server and select Submit. The system will now apply the configured network settings. Install the system on the network and reconnect from the management computer to the configured LAN IPv4 Address and log in.


Creating a CSR

Generate a Certificate Signing Request and obtain the certificate from a supported Certification Authority (CA).  Refer to Microsoft documentation for certificate information.

This step discusses how to create a certificate signing request (CSR) to be signed by an

...

approved certificate authority, which are listed at CCADB documentation. The certificate is used by the SBC for TLS SIP signaling support to MS Teams. This signed certificate will be applied to the WAN interface of the system.

Many CAs do not support a private key with a length of 1024 bits. Validate the CSR with your CA requirements and select the appropriate length of the key.

...