Page History
| Panel | ||||
|---|---|---|---|---|
In this section:
|
This object specifies the Use Location Table values for this Location code while cranking back on the next route.
To View Location
Use the Location window to associate a location value with a specified reason code within a specified crankback profile. When a location is configured and enabled, the specified location value must be included along with the reason code in the egress disconnect signaling to trigger crankback. Including a location with a reason code is optional. Refer to Call Routing - Crankback Profile and Crankback Profile - Reason for information on creating crankback profiles and adding termination reason codes to them.
To View Reason Locations
On the
...
SBC main screen, go to Configuration > Profile Management > Category: Call Routing Profiles > Crankback Profile > Reason > Location
...
Select the desired Crankback Profile and the desired Reason from the drop-down list to view and edit its respective Location list.
| Caption | ||||
|---|---|---|---|---|
| ||||
The Location window is displayed.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
To Edit Location
To edit any of the Location in the list, click the radio button next to the specific Location name.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
The Edit Selected Location window is displayed below.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
You would not be able to make any changes as the field is read only.
To Create Location
To create a new Location, click New Location tab on the Location List panel.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
The Create New Location window is displayed.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
The following fields are displayed:
...
| 0 | Table |
|---|---|
| 1 | Location Parameters |
...
Identifies the target Crank Back entry.
Options are:
...
or
All > Profiles > Call Routing > Crankback Profile > Reason > Location. The Location window lists any locations currently associated with a reason code in a crankback profile.
Use the Crankback Profile list to filter the list for a specific profile and the Reason list to select a specific reason code.
To Add a Location
To associate a location with a reason code in a specified crankback profile:
- Select the crankback profile from the Crankback Profile list and select the reason code from the Reason list.
- Click New Location.
- In the Index list, select the location you want to associate with the selected reason code within the selected crankback profile. The options are:
- User
GW Link Failure: This option allows a GW-GW signaling link (TCP connection) failure to initiate call crankback.
To configure a crankback profile to crankback for GW-GW link failures only:- Create the profile on the Crankback Profile window.
On the Reason window, select the crankback profile and add reason code 3 and set its Use Location Value to
...
Enabled.
On the Location window, select the crankback profile and reason code
...
3 and select the location GW Link Failure.
- International Net –
...
- International network.
...
- NAT Reserved6 – Reserved
...
- NAT Reserved12 – Reserved
...
- Net Beyond Inter Point – Network beyond interworking point (BI).
...
- Private Local – Private network serving the local user (LPN).
...
- Private Remote – Private network serving the remote user (RPN).
...
- Public Local – Public network serving the local user (LN).
...
- Public Remote – Public network serving the remote user (RLN).
...
- Transit Net – Transit network (TN)
...
- Click Save.
Note that a location can only be viewed and cannot be edited after creation.
To Copy a Location
To copy
...
a location to associate another location value with a reason code within a specific profile:
- Select the crankback profile from the Crankback Profile list and select the reason code from the Reason list.
- Click the radio button next to
...
- a location value currently associated with the reason code.
- Click Copy Location.
- Select another location for the Index list.
- Click Save.
To Delete a Location
To delete a location associated with a reason code within a specific profile:
- Select the crankback profile from the Crankback Profile list and select the reason code from the Reason list.
- Click the radio button next to the specific location value that you want to delete.
- Click the Delete (X) icon at the end of the row.
- Confirm the deletion when prompted.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Click Copy Location tab on the Location List panel.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
The Copy Selected Location window is displayed along with the field details which can be edited.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Make the required changes to the required fields and click Save to save the changes. The copied Location is displayed at the bottom of the original Location in the Location List panel.
To Delete Location
To delete any of the created Location, click the radio button next to the specific Location which you want to delete.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Click Yes to remove the specific Location from the list.
...
Overview
Content Tools