Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Include Page
_SBC 5100 5110 5200 5210 Unsupported
_SBC 5100 5110 5200 5210 Unsupported

Use this window to configure egress-specific call admission control (CAC) configuration for a specified SIP trunk group.

From the SBC main screen, go to Configuration > System ProvisioningProvisioning > CategoryCategory: Trunk Provisioning Provisioning> Trunk Trunk Group > SIP Trunk Group > CAC > Egress. The Egress window is displayed.CAC > Egress or 
All > Address Context > Zone > SIP Trunk Group > CAC > Egress

Use the drop-down boxes lists to select the desired an Address Context, Zone and SIP Trunk Group. The Edit Egress window is displayed.

Caption
0Figure
1SIP Trunk Group - Egress CAC Egress Edit Window

 Image ModifiedNote: An example dialog box is shown here. Refer to the table below for model-specific allowed values.

Include Page
SBXDOC100:_Subscribe_CAC_Access_RestrictionSBXDOC100:
_Subscribe_CAC_Access_Restriction

Use the following table to configure and then click Save.

...

...

Parameter

Description

Call Rate Max

Specifies the value of maximum allowed burst in sustained calls/second (above the allowed sustained rate) for egress call attempts.

SBC 5xx0 / 5400 / SWe - Range: 1-450, or unlimited. (The default value is unlimited.)

SBC 7000 - Range: 1-1,350, or unlimited. (The default value is unlimited.)

Note: You can set both “callBurstMax” and “CallRateMax” as  You can set both Call Burst Max and Call Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.

Call Burst Max

Specifies the value of maximum allowed burst (above the allowed sustained rate) for egress call attempts in calls/second. 

SBC 5xx0 / 5400 /SWe - Range: 1-900, or unlimited. (The default value is unlimited.)

SBC 7000 - Range: 1-2,700, or unlimited. (The default value is unlimited.)

Note: You can set both “callBurstMax” and “CallRateMax” as set both Call Burst Max and Call Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.

Register Rate Max

Specifies the maximum allowed sustained egress rate (registrations per second) of for initial SIP registrations allowed. (range: 1-1000, or unlimited .

Spacevars
0series2
range is for SBC 5xx0 series; 1-1500, or unlimited for SBC 5400; 1-3000, or unlimited for SBC 7000 series). The default value is unlimited.

Note:You can set both “registerBurstMax” and “registerRateMax” as  You can set both Register Burst Max and Register Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.

Register Burst Max

Specifies the maximum allowed egress burst (above the allowed sustained rate) for egress initial SIP registrations. (range: 1-1000, or unlimited for SBC 5xx0 series; 1-1500, or unlimited .

Spacevars
0series2
range is for SBC 5400; 1-3000, or unlimited for SBC 7000 series). The default value is unlimited. 

Call Limit

Specifies the total number of concurrent calls (either ingress or egress) allowed on egress. The value ranges from 0 to 2147483647 or unlimited (default).

Emergency Oversubscription

Specifies the oversubscription of resources (as a percentage) that is allowed for emergency calls. The value ranges from 0 to 1000 and the default value is 10.

Extended Emergency IP Limit

The resource oversubscription (expressed as numeric value) allowed for emergency calls. The value ranges from 0 to 40000 with a default value of 0.

Subscribe Rate Max

Specifies the maximum sustained egress rate (subscribes per second) of initial SIP subscribe request. (range: 1-1000, or unlimited.
Spacevars
0series2
range is 1-3000, or unlimited).
Subscribe Burst Max
Specifies the maximum allowed burst (above the allowed sustained rate) for egress initial SIP subscribe request. (range: 1-1000, or unlimited.
Spacevars
0series2
range is 1-3000, or unlimited) .

Other Req Rate Max

Specifies the maximum sustained egress rate (requests per second) of other out-of-dialog SIP requests. (range: 1-1000, or unlimited.

Spacevars
0series2
range is 1-3000, or unlimited).

Other Req Burst Max

Specifies the maximum allowed burst (above the allowed sustained rate) for any other egress out-of-dialog SIP request. (range: 1-1000, or unlimited.

Spacevars
0series2
range is 1-3000, or unlimited).

Hpc OversubscriptionSpecifies the over-subscription of the resources (in a percentage) that is allowed for HPC calls. When the baseline call limit and bandwidth limits are reached, normal calls are not admitted, but additional HPC calls are allowed up to the configured value percentage. The value ranges from 0 to 100 % and the default value is 10 %.

...