...
...
...
...
Host information, DNS settings, and other Node-Level options are configured in the
(SBC) via the WebUI as outlined below. The Host Information contains system information attributes that are used by the
SNMP manager.
...
- In the WebUI, click the Settings tab.
In the left navigation page, go to System > Node-Level Settings.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Node-Level Settings - SBC 1000/2000 |
---|
| Image Added
|
|
Panel |
---|
Caption |
---|
0 | Figure |
---|
1 | Node-Level Settings - SBC SWe Lite |
---|
| Image AddedImage Removed |
|
Node-Level - Field Definitions
...
...
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the IPv4 or IPv6 address of the Primary DNS server. If the Configuring Host Information and DNS#NodeNode-Level Network Settings drop down box is set to Dynamic, this field is configured automatically. Field is displayed when Configuring Host Information and DNS#Use Use Primary DNS is set to Yes. |
Primary Source
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Field lists all Logical Interfaces for the Primary DNS. The IP address selected is used as the source IP for the corresponding DNS queries. Definitions for available options include: <IP Address>: Source IP is the IP address associated with the source IP for the corresponding DNS queries. Auto: Source IP is the IP address of the interface which is used for the DNS query. |
Use Secondary DNS
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies whether or not a secondary DNS server is used. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the IPv4 or IPv6 address of the Secondary DNS server. If Configuring Host Information and DNS#NodeNode-Level Network Settings is set to Dynamic, this field is configured automatically. Field is displayed when Use Secondary DNS is set to Yes. |
Secondary Source
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Field lists all Logical Interfaces for the Secondary DNS. The IP address selected is used as the source IP for the corresponding DNS queries. <IP Address>: Source IP is the IP address associated with the source IP for the corresponding DNS queries. Auto: Source IP is the IP address of the interface which is used for the DNS query. |
Enable DNS
...
Service
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Note: This field not applicable to the SBC SWe Lite. When enabled, the SBC accepts DNS requests, and either serves them locally or forwards them as necessary. Valid entry: Yes (DNS request is forwarded or served locally as necessary) or No (DNS requests are not handled by the SBC). Default entry: No.
|
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Note: This field not applicable to the SBC SWe Lite. Determines whether or not the SBC behaves as a DHCP server (grants leases to other hosts on the network). |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
This field provides the option to set the Locater LED on the front of the SBC unit to either Off (LED is off), On Green (LED is green) or Blinking Green (LED blinks one time per second). Default entry: On Green. This option helps network personnel easily locate the SBC unit in a rack with other equipment. This LED is also recognized as the Peer Node Status LED. For additional information about the Locator LED's color and status definitions, see SBC 1000-2000 Status LEDs. |
EdgeView - Field Definitions
EdgeView
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure this field to enable or disable the EdgeView SCC. - No (default) - The EdgeView is disabled.
- Yes - The EdgeView is enabled.
|
EdgeView Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure this field with the IP address or FQDN of the EdgeView. Info |
---|
| This field applies only when the EdgeView field is set to Yes. |
|
EdgeView Management ID
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Note |
---|
| When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the cannot connect to the EdgeView. |
Configure this field with the Management ID for the EdgeView. For information about retrieving the EdgeView Management ID, refer to Obtaining and Installing an SBC SWe Lite Production License. Info |
---|
| This field applies only to the . The automatically sends the MAC address to the EdgeView.This field applies only when the EdgeView field is set to Yes. |
|
EdgeView Connection
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The status of the SBC’s connection to the EdgeView. This status may be one of the following: Info |
---|
| This field applies only when the EdgeView field is set to Yes. |
|
EdgeView Tunnel Status
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The status of the HTTPS tunnel from the EdgeView to the SBC. This status may be one of the following: Info |
---|
| This field applies only when the EdgeView field is set to Yes. |
|
EdgeView C2E License
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The status of the EdgeView Cloud to Edge Licensing on the SBC. This status may be one of the following: Info |
---|
| This field applies only to the .This field applies only when the EdgeView field is set to Yes. |
|
Country Level Information
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure this field with the country code in which the resides.
|
Configuring Node Level Options
...