Use this window to configure Session Recording Server (SRS) Group Data group data objects which are components of SRS Group Profilesgroup profiles. An SRS Group Data group data object specifies configuration for an SRS within the group. When you create an SRS Group Profile group profile you create one an initial SRS Group Data group data object within it, but a profile can contain up to eight SRS group data objects. Use this window to create additional SRS Group Data group data objects for a profile, or to make changes to the group data objects within an SRS Group Profilea profile.
On the SBC main screen, navigate to All > Global > Servers > Srs Group Profile > Srs Group Data. The Srs Group Data window is displayedopens.
By default, SRS Group Data SRS group data objects for "All Srs Group Profiles" are displayed listed in the Srs Group Data List window. To see only the SRS Group Data for a particular SRS Group Profilegroup profile, select the name of the profile in the Srs Group Profile list.
| Caption |
|---|
|
 Image Modified
|
In the Srs Group Profile list, select the Srs Group Profile to group profile to which you want to add an SRS Group Data group data object. When "All Srs Group Profiles" is selected you cannot create a new Srs Group Data objectThe New Srs Group Data option becomes available.
Click New Srs Group Data on the Srs Group Data List window. The Create New Srs Group Data window is displayedopens.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Create New Srs Group Data |
|---|
|
Image Modified |
- Enter values for the object using the Use the following table to configure the object and then click Save. The new SRS Group Data object is created and associated with the profile you selected.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | SRS Group Data Parameters |
|---|
|
|
Length/Range | 0-7 | The index number for this SRS group data configuration. The SBC supports up to eight SRS group data |
|
configurations | objects within a profile. The range allowed is 0 to 7. | | Transport |
|
N/A | | The transport type for this SRS. | | IP Address V4 or V6 | IPv4 or IPv6 |
|
Signaling IP | address of this SRS (The values "0.0.0.0" or "0::0" are not allowed) | | FQDN | An FQDN for the SRS server of up to 63 characters. Specify either an FQDN or IP address for the SRS entry, not both. | | IP Port / FQDN Port |
|
0 - 65535 | | TCP/TLS/UDP port for this SRS. Either the IP Port or FQDN Port field becomes available depending on whether you enter a value in the IP Address or FQDN field. The range allowed is 0-65535. | | IP TGID |
|
N/A | IP Trunk Group ID used to initiate the session | Name of the IP trunk group to use to initiate sessions towards the SRS. | | Srtp |
|
N/A | Specifies whether or not SRTP is enabled for the SRS. The options are: - Disable (default) - the SRTP packets received from the participant are decrypted and sent to the recorder.
- Enable - the media towards the recorder is encrypted.
| | Crypto Suite Profile |
|
1-23 characters | Specifies the name of the |
|
Crypto Suite Profile.When specified, the crypto suite profile, up to 23 characters. When a profile is selected, the SBC uses its encryption technique towards the SRS |
|
utilizes SBC (the crypto suite of the CS communication session (CS) is discarded). If a Crypto Suite Profile is not configured, |
|
the the encryption technique towards the SRS utilizes the negotiated crypto suite details of the respective CS tap leg (ingress tap leg/egress tap leg). Note: SRTP must be enabled for this option to be available. |
|
Select an SRS Group Data group data object by clicking the radio button adjacent to it in the Srs Group Data List window. The Edit Selected Srs Group Data window is displayedopens.
- Make the required changes and click Save.
Select an SRS Group Data group data object by clicking the radio button adjacent to it in the Srs Group Data List window.
Click Copy Srs Group Data on the Srs Group Data List window. The Copy Selected Srs Group Data window is displayedopens.
- Make changes and click Save.
Select the SRS Group Data group data object by clicking the radio button adjacent to it in the Srs Group Data List window.
- Click the Delete icon (X on ) at the right end of the selected row.
Confirm the deletion when prompted.