|
MC1Percent
| The percentage of calls to accept when the machine congestion level is 1. Enter value in range of 0-100 percent. Default is 75. |
MC2Percent
| The percentage of calls to accept when the machine congestion level is 2. Enter value in range of 0-100 percent. Default is 25. |
CAC | |
Call Limit | Total number of concurrent calls (0-2147483647 , or unlimited ), either ingress or egress, that are allowed (default=Unlimited ). |
Bandwidth Limit | The total media bandwidth limit (0-2147483647 , or unlimited ), in Kbits/sec (default=Unlimited ). |
Emergency Oversubscription | The percentage (0-1000) of resource oversubscription allowed for emergency calls (default=10 ). |
Hpc Oversubscription | This parameter specifies the amount of resource over-subscription as a percentage (0-100), that is allowed for HPC. When the baseline call limit and bandwidth limit are reached, normal calls are not admitted, but additional HPC are allowed up to the configured percentage value (default=10 ). |
Egress | |
Call Limit | Total number of concurrent calls (0-2147483647 , or unlimited ) that are allowed on egress (default=Unlimited ). |
Emergency Oversubscription | The percentage (0-1000) of resource oversubscription allowed for emergency calls (default=10 ). |
Hpc Oversubscription | This parameter specifies the amount of resource over-subscription as a percentage (0-100), that is allowed for HPC. When the baseline call limit and bandwidth limit are reached, normal calls are not admitted, but additional HPC are allowed up to the configured percentage value (default=10 ). |
Call Rate Max | Maximum (SBC 5000: 1-450 , or unlimited ; SBC 7000: 1-1350 , or unlimited ) sustained egress call rate allowed in calls per second. Note: You can set both Call Burst Max and Call Rate Max as "unlimited"; however, if you assign a value to one parameter, the other must also be assigned a value. |
Call Burst Max | Maximum (SBC 5000: 1-900 , or unlimited ; SBC 7000: 1-2700 , or unlimited ) allowed burst size (above the allowed sustained rate) for ingress call attempts, in calls per second (default=unlimited ). |
Ingress | |
Call Limit | Total number of concurrent calls (0-2147483647 , or unlimited ) that are allowed on ingress (default=Unlimited ). |
Emergency Oversubscription | The percentage (0-1000) of resource oversubscription allowed for emergency calls (default=10 ). |
Hpc Oversubscription | This parameter specifies the amount of resource over-subscription as a percentage (0-100), that is allowed for HPC. When the baseline call limit and bandwidth limit are reached, normal calls are not admitted, but additional HPC are allowed up to the configured percentage value (default=10 ). |
Call Rate Max | Maximum (SBC 5000: 1-450 , or unlimited ; SBC 7000: 1-1350 , or unlimited ) sustained ingress call rate allowed in calls per second. Note: You can set both Call Burst Max and Call Rate Max as "unlimited"; however, if you assign a value to one parameter, the other must also be assigned a value. |
Call Burst Max | Maximum (SBC 5000: 1-900 , or unlimited ; SBC 7000: 1-2700 , or unlimited ) allowed burst size (above the allowed sustained rate) for ingress call attempts, in calls per second (default=unlimited ). |
Media |
Media IP Interface Group Name
| Interface group to be used for media. |
Source
|