This screen This window lists the sensor data records and sensor list for fanfans, CPUCPUs, and the motherboard present in the SBC chassis
chassis.
To view sensor details, go to Monitoring > Dashboard > System > Hardware Status > Sensors. The Sensors window displays.
Caption |
---|
|
Image Removed |
Sensors or
Monitoring > System > Category: Hardware Status > Sensors
The Sensors window opens and The Sensors window consists of the following panes:
- Sensor Data Record Records : Specifies Specifies the list of sensor data records.
- Sensor List : Specifies Specifies the list of sensor data records and also data for each.
Caption |
---|
|
Image Added |
The following entries columns are displayed in the Sensor Data Records List pane:
Caption |
---|
0 | Table |
---|
1 | Sensor Information |
---|
|
Parameter | Description |
---|
Sensor | Name of the sensor. | Value | Current reading Sensor sensor value. | Unit | Measure in Measurement terms (degree for temperature, discrete for signals, RPM (revolution per minute) for fans). | Status | Current status of the Sensorsensor - ok-good
- na- not available
- 0x0100- not reliable
- 0x0200 – reliable
- nc- non critical
| UNR | Upper Non Recoverable. Critical state, need to take immediate action. | UCR | Upper Critical Recoverable. Slightly greater than upper threshold, which is critical but recoverable. | UNC | Upper Non Critical. Upper threshold value, but not critical. | LNC | Lower Non Critical. Lower threshold value, but not critical. | LCR | Lower Critical Recoverable. Slightly lower than lower threshold critical, but recoverable. | LNR | Lower Non Recoverable. Critical statistics, need to take immediate action. |
|
The following entries are displayed in the Sensor List pane:
Sensor | Description |
---|
MB/CPU1_REL_TEMP | CPU1 Real Temperature. Each CPU has its own temperature rating. |
MB/CPU2_REL_TEMP | CPU2 Real Temperature, each CPU has its own temperature rating. |
MB/US_NP_TEMP | Upstream Network Processor temperature. |
MB/DS_NP_TEMP | Downstream Network Processor temperature. |
MB/INLET_TEMP | INTEL board Inlet temperature. |
MB/CPU_HOT_IND | This signal triggers when the CPU is HOT. |
MB/CPU_CAT_ERR | Catastrophic indication signal. If the status is 0x0100, then the signal is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
MB/NP_TEMP_ALRT | Network processor temperature indication signal. |
MB/ICH_TEMP_ALRT | ICH Board Temperature indication signal. |
MB/IOH_TEMP_ALRT | IOH Board Temperature temperature indication signal. |
MB/ALM_MNR_RST | Alarm signal for minor reset. |
MB/ALM_MJR_RST | Alarm signal for major reset. |
FAN_LFT/PRESENT | This signal implies whether the left fan is present or not. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
FAN_LFT/TACH_F | Front Left FAN TACO reading left fan tachometer reading value. |
FAN_LFT/TACH_R | Rare Left FAN TACO Rear left fan tachometer reading value. |
FAN_CTR/PRESENT | This signal implies whether the center fan is present or not. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
FAN_CTR/TACH_F | Front Center FAN TACO center fan tachometer reading value. |
FAN_CTR/TACH_R | Rare Center FAN TACO Rear center fan tachometer reading value. |
FAN_RGT/PRESENT | This signal implies whether the right fan is present or not. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
FAN_RGT/TACH_F | Front Right FAN TACO right fan tachometer reading value. |
FAN_RGT/TACH_R | Rare Right FAN TACO Rear right fan tachometer reading value. |
PS_BOT/PRESENT | This signal implies whether bottom power supply is present or not. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
PS_BOT/INPUT_OK | This signal implies whether bottom power supply INPUT_OK is good or bad. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
PS_BOT/PWR_GOOD | This signal implies whether bottom power supply OUTPUT power is good or bad. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
PS_TOP/PRESENT | This signal implies whether top power supply is present or not. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
PS_TOP/INPUT_OK | This signal implies whether top power supply INPUT_OK is good or bad. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |
PS_TOP/PWR_GOOD | This signal implies whether top power supply OUTPUT power is good or bad. If the status is 0x0100, then it is not present and not reliable. If the status is 0x0200, then the signal is present and reliable. |