Page History
| Add_docset_workflow | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Noprint | |||||||||
|---|---|---|---|---|---|---|---|---|---|
|
...
| Panel | ||||
|---|---|---|---|---|
In this section:
|
Overview
The
| Spacevars | ||
|---|---|---|
|
- When the UE roams to other IMS networks and P-CSCF is located in the VPLMN then as an I-BCF (exit point of the network) that connects to the home network of the subscriber.
- As an entry and exit point the IMCN network when the SIP message is routed between two different IMS operators or IMCN networks.
| Include Page | ||||
|---|---|---|---|---|
|
| Caption | ||||
|---|---|---|---|---|
| ||||
|
...
|
At a high level, the functions performed by the IBCF are as follows:
- Network configuration or Topology hiding
- Application level gateway
- Transport plane control, that is, QoS control
- Screening of SIP signaling
- Media transcoding control
- Privacy protection
In IMS networks, the IBCF interfaces with the following other functional elements:
- P/I/S-CSCF over Mx interface (SIP)
- BGCF over Mx interface (SIP)
IBCF of other IMS Network over Ici/Izi interface
| Note |
|---|
...
The
|
| Include Page | ||||
|---|---|---|---|---|
|
Configuring SBC as IBCF
...
...
| Anchor | ||||
|---|---|---|---|---|
|
Configuring Transparency Profile for IBCF
| Code Block | ||
|---|---|---|
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Path
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Service-Route
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Feature-Caps
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Accept-Contact
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Alert-Info
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Contact
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader WWW-Authenticate
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Error-Info
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader From
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader History-Info
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader P-Called-Party-ID
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Reason
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Referred-By
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader To
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Accept
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Call-Info
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Warning
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader User-Agent
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Server
|
...
set profile services transparencyProfile IBCF_COMMON_HTP sipHeader Accept-Language |
Configuring Transparency Profile for P-CSCF
| Code Block |
|---|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Path
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Service-Route
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Feature-Caps
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Accept-Contact
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Alert-Info
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Contact
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader WWW-Authenticate
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Error-Info
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader From
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader History-Info
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader P-Called-Party-ID
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Reason
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Referred-By
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader To
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Accept
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Call-Info
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Warning
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader User-Agent
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Server
|
...
set profile services transparencyProfile PCSCF_COMMON_HTP sipHeader Accept-Language |
Configuring Transparency Profile for MSC
| Code Block | ||
|---|---|---|
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader To
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader From
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Path
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Accept
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Reason
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Server
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Warning
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Call-Info
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Alert-Info
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Error-Info
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader User-Agent
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Referred-By excludedMethods register,subscribe,info,publish,message,options,update,bye
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Request-URI
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Accept-Language
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Contact
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader P-Called-Party-Id
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Require
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Proxy-Require
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Security-Client
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipHeader Security-Verify
commit
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/pidf+xml excludedMethods register,invite,subscribe,info,publish,message,options,update,bye
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/pidf+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/rlmi+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody message/external-body
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/pidf+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/cpim-pidf+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/pidf-diff+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/dialog-info+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/simple-filter+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/resource-lists+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/conference-info+xml
|
...
set profiles services transparencyProfile MSC_COMMON_HTP sipMessageBody application/simple-message-summary
commit
|
Configuring Transparency Profile for Home Network SCCAS/S-CSCF
| Code Block | ||
|---|---|---|
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader To
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader From
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Path
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Accept
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Reason
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Server
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Warning
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Call-Info
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Alert-Info
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Error-Info
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader User-Agent
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Referred-By excludedMethods register,subscribe,info,publish,message,options,update,bye
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Request-URI
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Accept-Language
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader P-Called-Party-Id
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Require
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Proxy-Require
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Security-Client
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipHeader Security-Verify
commit
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/pidf+xml excludedMethods register,invite,subscribe,info,publish,message,options,update,bye
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/pidf+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/rlmi+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody message/external-body
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/pidf+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/cpim-pidf+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/pidf-diff+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/dialog-info+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/simple-filter+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/resource-lists+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/conference-info+xml
|
...
set profiles services transparencyProfile SCSCF_COMMON_HTP sipMessageBody application/simple-message-summary
commit |
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG1 ipInterface LIF1 ceName SBX portName pkt0 ipAddress 10.4.8.16 prefix 24 altIpAddress fd00:10:6b50:248f::a altPrefix 60
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG1 ipInterface LIF1 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG2 ipInterface LIF2 ceName SBX portName pkt2 ipAddress 10.4.9.16 prefix 24 altIpAddress fd00:10:6b50:249f::a altPrefix 60
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG2 ipInterface LIF2 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG3 ipInterface LIF3 ceName SBX portName pkt0 ipAddress 10.4.8.18 prefix 24 altIpAddress fd00:10:6b50:248f::c altPrefix 60
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG3 ipInterface LIF3 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG4 ipInterface LIF4 ceName SBX portName pkt0 ipAddress 10.4.8.18 prefix 24 altIpAddress fd00:10:6b50:248f::c altPrefix 60
|
...
set addressContext ADDR_CONTEXT1 ipInterfaceGroup LIG4 ipInterface LIF4 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 staticRoute 10.0.0.0 8 10.4.8.1 LIG1 LIF1 preference 100 |
| Anchor | ||||
|---|---|---|---|---|
|
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 id 5 sipSigPort 1 ipInterfaceGroupName LIG1 ipAddressV4 10.4.8.16 ipAddressV6 fd00:10:6b50:248f::a portNumber 5060 transportProtocolsAllowed sip-tcp,sip-udp,sip-tls-tcp,sip-sctp mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 dialogTransparency enabled |
IPTG-1 (Towards P-CSCF)
Common Configuration
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 media mediaIpInterfaceGroupName LIG1
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 ingressIpPrefix 10.54.80.101 32
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 ingressIpPrefix 10.54.80.8 32
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 signaling registration requireRegistration none
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 services transparencyProfile PCSCF_COMMON_HTP
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 signaling skipDTGLookupForRouteHdr enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 media omrAllowed enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 media primaryRealmName RealmName1
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup TG1 media directMediaAllowed disabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipRegRelay enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 callRouting useRouteSet received
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 signaling relayNonInviteRequest enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 services honorSdpClockRate enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-1 services preconditions transparent |
IPTG-6 (Towards TRF)
Common Configuration
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 media omrAllowed enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 media primaryRealmName RealmName1
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 media directMediaAllowed disabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 callRouting useRouteSet received
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 signaling skipDTGLookupForRouteHeader enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 services honorSdpClockRate enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup IPTG-6 services preconditions transparent |
| Anchor | ||||
|---|---|---|---|---|
|
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 id 6 sipSigPort 2 ipInterfaceGroupName LIG2 ipAddressV4 10.4.9.16 ipAddressV6 fd00:10:6b50:249f::a portNumber 5060 transportProtocolsAllowed sip-udp,sip-tcp,sip-tls-tcp,sip-sctp mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 dialogTransparency enabled |
IPTG-2 (Towards MSC)
Common Configuration
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 signaling registration requireRegistration none
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 services transparencyProfile MSC_COMMON_HTP
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipRegRelay enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 callRouting useRouteSet received
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 signaling relayNonInviteRequest enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 signaling skipDTGLookupForRouteHeader enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 services honorSdpClockRate enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-2 services preconditions transparent |
IPTG-3 (Towards SCCAS/S-CSCF)
Common Configuration
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 media mediaIpInterfaceGroupName LIG2
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 ingressIpPrefix 10.54.80.110 32
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 signaling registration requireRegistration none
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 services transparencyProfile SCSCF_COMMON_HTP
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 signaling skipDTGLookupForRouteHdr enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 media omrAllowed enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 media primaryRealmName RealmName1
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 media directMediaAllowed disabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipRegRelay enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 callRouting useRouteSet received
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 signaling relayNonInviteRequest enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE2 sipTrunkGroup IPTG-3 services preconditions transparent |
| Anchor | ||||
|---|---|---|---|---|
|
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 id 5 sipSigPort 1 ipInterfaceGroupName LIG3 ipAddressV4 10.4.8.18 ipAddressV6 fd00:10:6b50:248f::c portNumber 5060 transportProtocolsAllowed sip-tcp,sip-udp,sip-tls-tcp,sip-sctp mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 dialogTransparency enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 transitIoi "IPX" |
IPTG-4 (Towards Peer IPX)
Common Configuration
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 signaling registration requireRegistration none
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 signaling relayNonInviteRequest enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 services transparencyProfile IBCF_COMMON_HTP
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 media omrAllowed enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 media primaryRealmName RealmName2
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 media directMediaAllowed disabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipRegRelay enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 callRouting useRouteSet received
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 signaling relayNonInviteRequest enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 signaling skipDTGLookupForRouteHeader enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 services honorSdpClockRate enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-4 services preconditions transparent |
IPTG-5 (Towards Peer IBCF)
Common Configuration
| Code Block | ||
|---|---|---|
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 media mediaIpInterfaceGroupName LIG3
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 ingressIpPrefix 10.54.80.101 32
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 ingressIpPrefix 10.54.80.8 32
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 mode inService state enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 signaling registration requireRegistration none
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 signaling relayNonInviteRequest enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 services transparencyProfile IBCF_COMMON_HTP
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 signaling skipDTGLookupForRouteHdr enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 callRouting useRouteSet received
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 media omrAllowed enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 media primaryRealmName RealmName2
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 media directMediaAllowed disabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 transitIoi "IBCF"
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 callRouting sendRouteUriToPsx enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 services honorSdpClockRate enabled
|
...
set addressContext ADDR_CONTEXT1 zone ZONE3 sipTrunkGroup IPTG-5 services preconditions transparent |
PSX Configuration
The following IP Signaling Profile parameters must be enabled for PSX:
- Zone 1 Configuration (Towards P-CSCF in Roaming)
- Zone 2 Configuration (Towards Core in Home)
- Zone 3 Configuration (Towards Peer in External)
Anchor Zone 1 Configuration (Towards P-CSCF in Roaming)_PSX Zone 1 Configuration (Towards P-CSCF in Roaming)_PSX
Zone 1 Configuration (Towards P-CSCF in Roaming)
| Zone 1 Configuration (Towards P-CSCF in Roaming)_PSX | |
| Zone 1 Configuration (Towards P-CSCF in Roaming)_PSX |
Anchor Configuring PSX Route URI Based Routing_PSX Configuring PSX Route URI Based Routing_PSX
Configuring PSX Route URI Based Routing
| Configuring PSX Route URI Based Routing_PSX | |
| Configuring PSX Route URI Based Routing_PSX |
Perform the following steps to configure PSX route URI-based routing:
Create a Feature Profile.
Enable 'Perform Route Header Based Routing'.
Caption 0 Figure 1 Route Header Based Routing
...
On the SIP Trunk Group , select the mapped Feature Control Profile and IP Signaling Profile.
Caption 0 Figure 1 Ingress SIP TG
...
- Create Call Parameter Filter Profile and set the values for :
- Type as "Regex Group".
- Variable Type as Route URI Host Part.
- Configure RouteURI as matching Regex String.
Caption 0 Figure 1 Call Parameter Filter Profile
...
- Create Policy Profile.
- Enable URI and URI Action as Override IP Peer with Route URI Host Part.
- Map the created Call Parameter Filter Profile.
Caption 0 Figure 1 Policy Profile
...
Map the Policy Profile under 'Policy Profile Group'.
Caption 0 Figure 1 Policy Profile Group
...
On the SIP Trunk Group under Egress, select the Output Policy Profile Group'.
Caption 0 Figure 1 Egress SIP Trunk Group
...
For domain based configuration, select UserName Routing.
- Select the previously mapped Call Parameter Filter Profile and Domain Name from the drop-down menu.
Caption 0 Figure 1 Username Routing
...
Anchor Configuring IP Signaling Profile_PSX Configuring IP Signaling Profile_PSX
Configuring IP Signaling Profile
| Configuring IP Signaling Profile_PSX | |
| Configuring IP Signaling Profile_PSX |
The following parameters must be configured under IP Signaling Profile.
| Anchor | ||||
|---|---|---|---|---|
|
Enable the following PSX "Common IP Attributes" flags from IP SIGNALING PROFILE screen:
- Add P-Charging-Function Addr
- Create P-Charging-Vector
- Create P-Visited-Network Id
- Create Path Header
- Customized Session Timer Behavior
- Disable Host Translation
- End to End BYE
- End to End RE-INVITE
- End to End UPDATE
- End to End PRACK
- Enable Dial String Handling
- No Port Number 5060
- P-Called-Party-Id-Support
- Restrict History Info Header
- Store P-Charging Vector
- Store Service-Route Header
- Validate Access Nw Info Header
| Caption | ||||
|---|---|---|---|---|
|
...
|
Anchor Configuring Relay Flags_PSX Configuring Relay Flags_PSX
Configuring Relay Flags
| Configuring Relay Flags_PSX | |
| Configuring Relay Flags_PSX |
Enable the following "Relay Flags" from IP SIGNALING PROFILE screen:
- Dialog Event Package
- Info
- Options
- Select Reject the REFER request if no match is found from Refer To Header Relay option.
| Caption | ||||
|---|---|---|---|---|
|
...
|
Anchor Configuring Egress IP Attributes_PSx Configuring Egress IP Attributes_PSx
Configuring Egress IP Attributes
| Configuring Egress IP Attributes_PSx | |
| Configuring Egress IP Attributes_PSx |
Enable the following "Egress IP Attributes" from IP SIGNALING PROFILE screen:
- Select SIP Only from IP Protocol Type.
- Transit PAI From Unregistered Peer (under Flags)
- Use IP Signaling Peer Domain In R-URI (under Domain Name)
- Select Include npdi from NPDI Options (under Number Portability Attributes option).
- Select P-Preferred-ID from Privacy Information (under Privacy option).
- Include Privacy (under Privacy > Flags)
- Merge Received Contacts with Existing Contacts (under Redirect)
- Select Include None from Include Charge Information option (under SIP Headers and Parameters)
- Select Not Send from Session-Expires Refresher option (under SIP Headers and Parameters)
- Select None from SIP TO Header Mapping option (under SIP Headers and Parameters)
- Transparency For Destination Trunk Group Parameter (under SIP Headers and Parameters > Flags)
- End To End Ack (under SIP Headers and Parameters > Flags)
- Diversion (under SIP Headers and Parameters > Call Forwarding)
- Select Retry Without ETS from the Action For ETS 400 Responses With 417 Reason Code drop-down box (under SIP RPH ETS)
- Set ETS Default Priority Value as 0 (under SIP RPH ETS)
| Caption | ||||
|---|---|---|---|---|
|
...
|
Anchor Configuring SIP Trunk Group_PSX Configuring SIP Trunk Group_PSX
Configuring SIP Trunk Group
| Configuring SIP Trunk Group_PSX | |
| Configuring SIP Trunk Group_PSX |
The following profiles/fields must be enabled:
- Zone Index Profile
- IP Signaling Profile
- Feature Control Profile
- Signaling Profile
- SIP Domain
- IP Version Preference
- Use IPTG Routing (Hop By Hop Routing) For Ingress (Ingress > Flags)
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
- Select Services as Not Screened.
| Caption | ||||
|---|---|---|---|---|
|
...
|
Anchor Zone 2 Configuration (Towards Core in Home)_psx Zone 2 Configuration (Towards Core in Home)_psx
Zone 2 Configuration (Towards Core in Home)
| Zone 2 Configuration (Towards Core in Home)_psx | |
| Zone 2 Configuration (Towards Core in Home)_psx |
The following two configurations are included in Zone 2 configuration:
Anchor Configuring SBC Towards MSC_psx Configuring SBC Towards MSC_psx
Configuring SBC Towards MSC
| Configuring SBC Towards MSC_psx | |
| Configuring SBC Towards MSC_psx |
Configuring IP Signaling Profile
The following parameters must be configured under "Ip Signaling Profile".
- Configuring Common IP Attributes
- Configuring Relay Flags
- Configuring Egress IP Attributes
- Configuring Ingress IP Attributes
Configuring Common IP Attributes
Enable the following PSX flags from IP SIGNALING PROFILE screen:
- Add P-Charging Function Addr
- No Port Number 5060
- P-Called-Party-Id-Support
- Create P-Charging-Vector
- Create P-Visited-Network Id
- Create Path Header
- Disable Host Translation
- Restrict History Info Header
- End To End BYE
- End To End RE-INVITE
- End To End UPDATE
- End To End PRACK
- Enable Default PUI Procedures
- Enable Dial String Handling
- Store P-Charging Vector
- Store Service -Route Header
- Validate Access Nw Info Header
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Enable the following PSX "Relay Flags" from IP SIGNALING PROFILE screen:
- Dialog Event Package
- Info
- Options
- Select Reject the REFER request if no match is found from Refer to Header Relay option.
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Select/enable the following parameters and flags from IP SIGNALING PROFILE screen:
- Select SIP Only from IP Protocol Type
- BCI Interwork Encountered (in BCI)
- Select Use IP Signaling Peer Domain In R-URI (in Domain Name)
- Select Include npdi from NPDI Options (in Number Portability Attributes option)
- Select Include Privacy and Do Not Include Tel URI in PAI Header(in Privacy)
- Select Merge Received Contacts with Existing Contacts from Contact Handling(under Redirect)
- Select Include None from Include Charge Information (in SIP Headers and Parameters option)
- Select None from SIP TO Header Mapping (under SIP Headers And Parameters option)
- Select Include CPC Information(under Flags option)
- Select Transparency For Destination Trunk Group Parameter(under Flags option)
- Select End to End Ack (under Flags option)
- Select Diversion from Redirect Information (under Call Forwarding)
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Enable the following Ingress IP Attributes flag from IP SIGNALING PROFILE screen:
- Map Called Party Category In P-Sig-Info Header
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Configure the following profiles and fields for the SIP Trunk Group:
- Feature Control Profile
- IP Signaling Profile
- Signaling Profile
- SIP Domain
- Zone Index Profile
- IP Version Preference
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- IP Peer Supported (Egress > IPTG)
- Egress IP Signaling Profile (Egress > IPTG)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
Select Services as Not Screened.
| Caption | ||||
|---|---|---|---|---|
|
...
|
Anchor Configuring SBC Towards S-CSCP/SCCAS_psx Configuring SBC Towards S-CSCP/SCCAS_psx
Configuring SBC Towards S-CSCF/SCCAS
| Configuring SBC Towards S-CSCP/SCCAS_psx | |
| Configuring SBC Towards S-CSCP/SCCAS_psx |
Configuring IP Signaling Profile
The following IP Signaling Profile parameters must be configured.
| Anchor | ||||
|---|---|---|---|---|
|
Enable the following PSX flags from IP SIGNALING PROFILE screen:
- Add P-Charging Function Addr
- Create P-Charging-Vector
- Create P-Visited-Network Id
- Customized Session Timer Behavior
- Disable Host Translation
- End To End BYE
- End To End RE-INVITE
- End To End UPDATE
- End To End PRACK
- Enable Default PUI Procedures
- Enable Dial String Handling
- No Port Number 5060
- P-Called-Party0Id-Support
- Restrict History Info Header
- Store P-Charging Vector
- Store Service-Route Header
- Validate Access Nw Info Header
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Enable the following "Relay Flags" from IP SIGNALING PROFILE screen:
- Dialog Event Package
- Info
- Options
- Reg Event Package
- Select Reject the REFER request if no match is found from Refer to Header Relay option.
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Configure the following Egress IP Attributes parameters as indicated:
- Select SIP Only from IP Protocol Type
- Select Transit PAI From Unregistered Peer from Flags
- Select Use IP Signaling Peer Domain In R-URI (in Domain Name)
- Select Include npdi from NPDI Options (in Number Portability Attributes option)
Select P-Preferred-ID from Privacy Information options (in Privacy option)
- Select Include Privacy (in Privacy)
- Select Merge Received Contacts with Existing Contacts from Contact Handling(under Redirect)
- Select Include None from Include Charge Information (in SIP Headers and Parameters option)
- Select Not Send from Session-Expires Refresher (in SIP Headers and Parameters option)
Select None from SIP TO Header Mapping (under SIP Headers And Parameters option)
- Select Transparency For Destination Trunk Group Parameter(under Flags option)
- Select End to End Ack (under Flags option)
- Select Diversion from Redirect Information (under Call Forwarding)
| Caption | ||||
|---|---|---|---|---|
|
...
|
| Anchor | ||||
|---|---|---|---|---|
|
Configure the following profiles and fields for the SIP Trunk Group:
- Feature Control Profile
- IP Signaling Profile
- Signaling Profile
- SIP Domain
- Zone Index Profile
- IP Version Preference
- Use IPTG Routing (Hop By Hop Routing) For Ingress (Ingress > Flags)
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- IP Peer Supported (Egress > IPTG)
- Egress IP Signaling Profile (Egress > IPTG)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
Select Services as Not Screened.
| Caption | ||||
|---|---|---|---|---|
|
...
|
Anchor Zone 3 Configuration (Towards Peer in External)_psx Zone 3 Configuration (Towards Peer in External)_psx
Zone 3 Configuration (Towards Peer in External)
| Zone 3 Configuration (Towards Peer in External)_psx | |
| Zone 3 Configuration (Towards Peer in External)_psx |
Refer to the section Zone 1 Configuration (Towards P-CSCF in Roaming).
...
| Pagebreak |
|---|
Overview
Content Tools