This page describes CLI syntax and parameters for the SIP Trunk Group 'action' object.
...
...
|
As a best practice, always use UPPERCASE for trunk group names. |
Command Syntax
| Code Block |
|---|
|
% set addressContext <name> zone <name> sipTrunkGroup <name> action <dryUp | force>
|
Command Parameter
| Caption |
|---|
| 0 | Table |
|---|
| 1 | SIP Trunk Group Action Parameters |
|---|
|
| Parameter | Length/Range | Description |
|---|
actionN/A
| Action when putting this SIP trunk group outOfService. This action controls whether calls are forced off or allowed to dry up upon a mode out-of-service action. |
|