Use this object to route a call or request to the next-hop entity.
To View and Edit Call Routing
On SBC main the
main screen, go to
Configuration >
System Provisioning >
Category: Trunk Provisioning >
Trunk Group >
Sip SIP Trunk Group >
Policy >
Call Routing. The Call Routing window is displayed.
The Call Routing can be checked for each Address Context, for each Zone, for each Sip SIP Trunk Group created or for all the Address Contexts, Zones and Sip SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip SIP Trunk Group.
The Edit Call Routing window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Sip SIP Trunk Group - Policy - Call Routing Edit Window |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Sip SIP Trunk Group - Policy - Call Routing Parameters |
|---|
|
Parameter | Description |
|---|
Element Routing Priority | The Element Routing Priority table indicates what Call Processing Elements types (including "none") should be used to determine matching routing table entries. Routing table lookups are attempted in priority order for all matching Call Processing Element types until a match is found. Different Element Routing Priority profiles can be associated with different (ingress) trunk groups. If no Element Routing Priority table is explicitly associated with a trunk group, the DEFAULT_IP Element Routing Priority profile is used. |
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.