Page History

Use Route Set


 This parameter controls the routeset usage when routing a call.

• Disabled – (default) Request is routed using routing database.

• Rcb Next Hop And Stored – Request is routed to the nextHop (Registrar IP in RCB) stored in RCB and copy stored Service Route to egress.
• Received – Request is routed using the received routeset in the request.

• Roaming Or Stored – If the UE is in roaming mode, request is routed based on the DTG loopback, where DTG is the route obtained during REGISTRATION. If UE is not in roaming, the request is routed same as Stored.
• Stored – Request is routed using Path or Service-Route stored during registration.

• StoredAll – All requests (including refresh registers) are routed using Path or Service-Route stored during registration.

Ans Supervision Timeout


Ans Supervision Timeout Action


• Release (default)

• Trap And Restart 

Crank Back Profile


 Specifies the name of the Crank Back profile.

International Noa Plus


 Enable this flag to set CPN and CIN NOA to “International” when number begins with '+'.

• Disabled (default)

• Enabled

Add Stored Path As Top Route


 When enabled, this flag adds the stored Path header as the topmost Route header (on top of stored Service-Route headers) in the outgoing out-of-dialog requests when Use Route Set is set to stored.

• Disabled (default)

• Enabled

This parameter defines whether to apply DNS crankback profile or not for received SIP error response. If it is enabled, DNS crankback feature is applied.

• Disabled (default)
• Enabled

• When enabled, the Route-URI is sent to PSX, works in conjunction with Perform Route Header Based Routing enabled in PSX.
• When disabled (default), the Route-URI is not sent to PSX.